Resume - My working career is coverd with Petrochemical plant structural detail design an...

Misco Jobs

Resume #18688

CONTACT INFORMATION:
View contact information...

LANGUAGE: Fluent In English, Persian

EDUCATION:
- B.Sc In Civil Engineering, IUST (Elmo Sanat) (1994-1998)
- M.Sc In Marine Structures, University of Tehran (1999-2001)with the total GPA "17.58" out of "20":
- Master of Science Thesis Title: "Ultimate Load Capacity Analysis of Fixed Offshore Platforms with Pushover Method".

EMPLOYMENT RECORD:
- NARGAN Engineers & Constructors (2000-2002), www.nargan.com
- SAZEH Consulting Engineers (2002-2003)
- SADRA (SAFF) Company (2003 up to Now), www.sadra.ir

COMPUTER KNOWLEDGE & CERTIFICATES:
-SAP2000 (+ETABS+SAFE)
-ANSYS 5.4
-SACS 5.1 (for structural analysis and design)
-AutoCAD, Excel, Power Point, Word
-Calibration and Testing Laboratory Accreditation ISO/IEC 17025 Certificate from Iran Standard Company.

Research Areas:
-Nonlinear Pushover Analysis of Fixed Offshore Platforms.
-Comprehensive Schema of Marine Laboratories

Publication:
"Ultimate Load Capacity Analysis of Fixed Offshore Platforms with Pushover Method" presented and published in the "5th International Conference on Coasts, Ports and Marine Structures", October 2002,Ramsar/Iran.

PROFESSIONAL EXPERIENCES:
Structural Engineer:

A) Structural design of steel & concrete structures in AMIRKABIR & JAM Petrochemical plants:
1) Structural analysis & design of Cocatalist Shelter structure
2) Effluent Basin structural analysis & design
3) Bagging & Warehouse Structure, analysis and Design.
4) Extrusion Structure design.
5) Pipe Rack analysis and design.
6) All the above-mentioned analysis and Design was performed with SAP2000 Structural program

B) AGHAJARI Gas Injection Project:

1) Oily Water Separator Basin analysis & design
2) Flare pipe supports analysis & design
3) Turbo Generator Supporting Structure design
4) Design of typical Steel Connections

Offshore Structural Engineer:
A) Structural design & recalculation of BAHREGANSAR oil field offshore platforms.

1) Manifold Platform:
1-1) Inplace & PSI analysis.
1-2) Lifting analysis & lifting devices calculations (Deck and Jacket).
1-3) Joint Can analysis.
2) Production Platform:
2-1) Jacket lifting analysis & lifting Device calculation.
2-2) Deck equipment supports calculation.
2-3) Turbo Generator Shelter analysis & design.

3) Bridge Structures (pp-mp, mp-mwp, pp-lq & pp- flare):
3-1) Inplace analysis.
3-2) Earthquake analysis.
3-3) Lifting analysis & lifting device calculation.
3-4) Load out & transportation analysis.
4) All the above-mentioned analyses are performed with SACS version 5.1.
5) And also checking the Production Platform PDMS model.

B) Structural design & calculation of SALMAN oil and gas field offshore jacket type platforms.

1) Preparing Jacket Structural Design Brief
2) Following analysis on Living Quarter Platform (LQ3):
2-1) Inplace analysis
2-2) Ship Impact analysis
2-3) Dynamic & Earthquake analysis
2-4) Fatigue analysis (Deterministic)
2-5) Lifting analysis
2-6) Transportation & Load out analysis
2-7) Vortex shedding & Wave slamming check
3) The above-mentioned analysis was performed by SACS 5.1 structural analysis & design software.

C) Performing Nonlinear Pushover Analysis on ABOZAR production platform in order to evaluate the ultimate load capacity of this damaged platform.(My M.S. thesis)

D) Topside Offshore Structural lead Engineer on South Pars Project, Phases 6, 7, 8.
1) Review the structural analysis and drawings
2) Working on Engineering documents (MTO, MR and TBE)
3) Preparing Installation procedures in fabrication yard, and performing relevant analysis with ANSYS 5.4
4) Review and approve the vendors technical quotations.

E) MOBIN Flare Project (MOBIN Petrochemical Plant Offshore Flare)
1) Tripod Flare, bridge support and bridge structural analysis and design (in-place, earthquake and on bottom stability) with SACS

F) RESHADAT Renovation & Development Project jacket structural design
1) Production platform jacket In-place Analysis
2) Production platform jacket Lunch Analysis
3) Preparing MTO for all five jackets

G) Structural Analysis and Design of SOUTH PARS PHASES 15&16 Project which consist of 2 Well Head Platform, 2 Bridge Supports, 2 Flare Platform and 4 Bridge structures.

1) WHP jacket platform in-place, dynamic, earthquake, spectral fatigue and other relevant installation analysis are on going with SACS Structural Analysis software.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 10849)

Go to Search Parameters...

Brief Description

Camp Boss

Service Engineer, Completed Aircraft Maintenance Engineering (3 Yrs)

Over three years title experience in the Barnett Shale. Experience leasing in the Barnett Shale and Fayetteville Shale. Advanced experience using ESRI GIS mapping software.

Instrument Technician with maintenance and commissioning experience

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

Currently attending Saint Tech College and will be graduating in may.

Application for the post of Safety Officer

Safety Supervisor

Application for the Post In Engineering Department

Seeking a challenging career with in a reputed Company

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Senior Qa/QC For Oil/Gas Projects

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

selling ABB Instrumentation Products Range, which includes the Installation, and commissioning.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Please accept my resume for consideration.

Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.

Mechanical engineer.

Extensive experience in gas operations,vast knowledge of its systems and procedures.Considerable experience planning, putting together, maintaining and managing new facilities.Superior managerial, organizational and inter-personal skills that produce results.

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern

I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.

Analysis and Design of various Structures Analysis and design of vessel

Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out