Resume - I have a stable work history having spent four years working as a Mechanical Eng...

Misco Jobs

Resume #18941

CONTACT INFORMATION:
View contact information...

Career Objective

To obtain an entry-level where I can apply the skills and knowledge gained through my studies and work experiences to date, in an environment where my ideas and participation will contribute to team success.

Education and Qualifications

2003 - 2004 Masters Degree in Petroleum Engineering (Oil & Gas), Curtin University of Technology, Western Australia.

June 2002 Assessed by the Institution of Engineering Australia to meet the current academic requirements for standing as a Mechanical Engineering Technologist. Asco 2128-13 Ref: Contact ID 2267622

1993 – 1998 Bachelor of Engineering (Mechanical Engineering), Philadelphia University – Aman, Jordan

Courses and Certificates

* Occupational Health and Safety Courses- Curtin University of Technology, WA, Australia
- Health and Safety management 581- March 2002 to July 2002
- Health and safety Law- March 2002 to July 2002
* MARCSTA Course (Cr No. 02/95612), Richard Mining Services Pty Ltd, WA - July 2002
* Senior First Aid Certificate, Richard Mining Services Pty Ltd, WA - July 2002
* Introduction to Occupational Safety & Health Law, WorkCover WA - July 2002
* Introduction to Injury Management, WorkCover WA – July 2002
* Overview of the Workers Compensation & Rehabilitation Act 1981, WorkCover WA – July 2002

Strengths and Qualities

The following attributes and qualities are founded on my achievements, qualifications and work experience as well as feedback I have received from managers, colleagues and customers with whom I have worked.

* Highly effective intellectual capabilities with a proven ability to apply them to real world issues.

* Consistently demonstrate an ability to make an effective contribution to the performance of a team.

* Impeccable safety record with the ability to identify and rectify hazards.

* Demonstrated capacity to exercise initiative and accept challenges.

* Strong administrative, organisational and coordination skills.

* Sound analytical and problem-solving skills.

* Superior interpersonal skills with an ability to interact at all levels.

* Consistently demonstrate high levels of customer service (internal and external).

* Well-developed time management skills and the ability to juggle conflicting tasks.

* Demonstrated 'can-do' attitude and flexible, hands-on approach.

Career Snapshot

August 2000 – April 2002
Stations Engineer and CFN System Controller, Teyseer Service Center (State of Qatar)

Teyseer Service Center consists of a large group of unique service and petrol stations in the State of Qatar. It is one of the largest companies in the Teyseer Group.

Responsibilities:

* General administrative duties and providing status and performance reports to the
General Manager.

* Extensive liaison with clients and sub-contractors.

* Supervision and development of team of 200 employees, training and motivating them to achieve through effective performance management.

* Maintenance and programming works for petrol pumps and equipment (Tokheim Products).

* Follow-up maintenance and programming works for CFN System including electronic functions.

* Development, maintain and follow-up amendments work required in the stations (tanks, manholes, pipes, pumps, dispensers etc)

* Provide a safe working environment and ensure the team's adherence to safety policies and procedures.

October 1998 to July 2000
Project/Site Engineer, Peninsular Petrotech Engineering

PPE is one of the most effective companies in the Teyseer Group, running a large number of engineering projects and employing approximately 300 employees and workers in the State of Qatar.

Responsibilities

* Reporting to the Executive Manager and performing engineering work for Petrol Stations and LPG systems.

* Organise and manage project labour and the delivery of materials, plant and equipment.

* Established detailed programs for the coordination of project activities.

* Set-up and implemented a work control system to ensure that standards of performance, quality, cost and safety were met.

* Follow-up shutdown works by considering cost, time and quality issues.

* Planning and site work for LPG systems and high-pressure vessels.

* Tender preparations and estimations for different projects.

* Estimating, planning, installing, programming, testing and commissioning works for petrol stations activities including:
-Piping work and fuel storage tanks
-Suction and remote dispensers (Tokheim Products)
-Submersible pumps and positive displacement pumps (Fe-Petro Products).
-Top loading system and flow metres
-Oil pumps, grease pumps, car wash and air compressors.
-Electrical installations for dispensers and submersible pumps.

January 2003 to August 2004
Master of Petroleum Engg (Final Project), Curtin University of Technology (Department of Petroleum engineering)

Reservoir simulation study, history matching and field optimization for South Plato Oil Field (located in TL/ 6, Carnarvon Basin, of the Western Australia coast, approximately 6 kms of the Varanus Island). (software used: Tempest_More & Prosper).

Project Outlines and objectives

South Plato Field was discovered by Apache Energy in 2001 with the drilling of the discovery well SP-1 and the appraisal well SP-2 which was abandoned.

Before commencement of production a field development plan and a reservoir simulation study was carried out for the field. The model was run with well SP-1 with initial production of 10,000 bopd and it predicted water cut would reach 40% in January 2003 with productivity around 7000 bopd.

Within one month after commencement of the actual production the well SP-1 encountered unexpectedly high water cut reaching 70% and lowering productivity to only 3000 bopd. PLT and CBL were run and identified a potential channeling behind the pipe.

The objectives of the project were:

* To review the previous data and quality control the simulation model of the Field.

* To update the simulation model with production, PLT data and geological aspects.

* To history match the updated model with the actual production data (oil production, water cut, PI, BHP).

* Based on the successfully history matched model, optimizing the development of the field including cost analysis.

Computer Literacy

Well-developed computer literacy and a demonstrated ability to become rapidly competent in new software. Experience includes:

* Windows 2000
* MS Office Suite (Word, Excel, PowerPoint)
* Email and Internet

Softwares Literacy (Oil and Gas Simulations)

Well-developed and good knowledge for oil/gas simulations and softwares including:

* Tempest-More
* Eclipse Office
* Prosper
* PVT Sim.

Interests & Hobbies

* SPE membership
* I enjoy bodybuilding, reading technology magazines, swimming, listening to music and playing chess.

Personal Details

Languages Fluent in English and Arabic (written and spoken)
Nationality Australian
Availability To be discussed
Driving Licen. Available

Referees
Will bE provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10923)

Go to Search Parameters...

Brief Description

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out