Resume - Ten(10) years of experience in analysis, design and detail engineering of offsho...

Misco Jobs

Resume #19126

CONTACT INFORMATION:
View contact information...

SR. STRUCTURAL ENGINEER

EDUCATION AND QUALIFICATIONS: B. Tech. in Civil Engineering in 1995 from G.B.PANT University, Pantnagar, Nainital, UP, India

PROFESSIONAL EXPERIENCE

Mar'04 – present
Worley Arabia Co. Ltd., Abu Dhabi
Sr. Structural Engineer
* Infield Pipeline Replacement Project (FEED)
(Client: ADMA-OPCO, Abu Dhabi, UAE)

Topside modifications for the 41 well head towers in Zakum Field. Modification includes deck extension to install pig launcher for new risers, Pipe support at decks, Riser clamps and miscellaneous calculation. In Progress.

* Platform Redesign Feasibility Study – Ras Gas Expansion Project
(Client: Ras Laffan Liquified Natural Gas Co. Ltd., Qatar)

Conceptual design of the Minimum Facility Drilling (MFD) Platform as part of complex. Conceptual study included the Tripod(with and without skirt piles) and Four legged jacket with six(6) and nine(9) conductors respectively and topsides with x-mas tree and minimum drilling loads.

Analysis carried out are Inplace with simplified fatigue, Lifting, Transportation, Two Block Upending(inAir) and Progressive Collapse for the MFD Jacket structure.

* Umm Shaif Gas Injection Facilities Project (Feed Optimization)
(Client: ADMA-OPCO, Abu Dhabi, UAE)

Local Deck modification / extension and strengthening carried out at various platforms of Umm Shaif Super Complex. Modification / addition carried out are deck extension, excess platforms, monorails and pipe supports. Activity includes local checks, miscellaneous calculations like padeyes, stiffener design etc, check for Transportation and Installation loads, Material Take off.

* Riser Platform Project
(Client: Crescent Gas Corporation Ltd, Sharjah, UAE)

Analysis & Design of Pipe bridge from new riser platform to existing platform. Analysis includes In-place, Lifting analysis, Transportation and Loadout. Also performed the misc. design like Guide & Bumper Design, Guide Pin Design, Padeye Design.

Analysis and Design of New Riser Platform Jacket Structure. Analysis includes Skidded Loadout, Transportation, Lifting and Upending by Controlled Flooding. Also performed the misc. design like Buoyancy Tank Design, Trunion Design, Padeye Design.

* GG – II Debottlenecking Project
(Client: ADMA-OPCO, Abu Dhabi, UAE)

Deck extension to the existing Collector Seperator platform. Pipe supports for the 30" feed gas line. Global inplace analysis of the existing bridge with 30" feed line on new pipe supporting structure. Pipe support on the existing GG-II platform for 30" feed gas line. Preparation of the FEED design dossier.
Sept'03 to Feb'04
Technip, Abu Dhabi
Sr. Structural Engineer
Project Experience:

* Dalia FPSO Project, Block – 17 Angola
(Client: TOTALFINAELF, Contractor: Samsung & Daewoo, South Korea)
Analysis & Design of Separation modules and Piperacks using SACS5.1 software. Analysis includes In-place condition, Lifting analysis, Transportation, Blast considering ship hull deflection and all the ship motions under different sea conditions. Also performed the misc. design of Guide & Bumper, Equipment Support Design, Padeye Design, Secondary member and Ring Plate Design.

Dec'02 to Aug'03
Kellogg Brown & Root Far East Pte Ltd (KBR), Singapore
Structural Engineer
Project Experience:

* Opql-Isnd Phase-Ii Expansion PS-1K Project (2003)
(Client: OXY-Qatar, Contractor: SMOE-S'PORE)
Topside Conceptual Framing & Topsides installation Study. Design and Analysis of Power Generation Module using SESAM3.01. Analysis Involved Inplace, Lifting and Transportation.
Miscellaneous Design like Guide & Bumper Design, Diesel Tank Design, Padeye Design and Ring Plate Design.

Dec'01 to Dec'02
John Brown Technologies (I) Ltd., Bangalore, India
Structural Engineer

* Deputation to HHI, Ulsan, S. Korea (2002)
Involved in the Design and Detailed Engineering of offshore structure using National & International codes for Kizomba-A: FPSO (Esso Exploration), West-Seno: TLP-A (Unocal).
- Superlifting and Loadout Analysis of TLP-structure.
- Scantling Design for FPSO Hull as per ABS & DNV.
- Buckling Check of tank scantling as per DNV.
- Fatigue design of Crane Pedestal.
- Preparation of Design Brief & Basis of Hull Structure for Strength and Fatigue Design.
- Wet Towing Criteria for TLP and FPU.
- Fender design for TLP structure.
- Equipment Supporting Structure design.

April'96 to Dec'01
Triune Projects Pvt. Ltd., New Delhi, India
Sr. Structural Engineer
Involved in the Design/Detailed Engineering in the field of Oil & Gas, Refinery and Petrochemicals, both Onshore & Offshore Steel & R.C.C. Structures using various Indian & International codes and specifications and review of design drawing.
Project Experience:

* CPP-3, Topside Facilities
(KEPPEL FELS, PETECHIM, 2001)
Analysis & Design of Six Process Modules & a Riser Module resting on MSF (Main Sub Frame). It's a part of CPC in area BK-4 of White Tiger Field of Vietsov Petro.
Inplace & Lifting analysis using SACS software.
* Barauni Refinery Expansion Projects
(L & T-Mumbai, 2001)
Analysis and design of Piperack / Pipe supports, Static and Dynamic Analysis of Compressor / Pump Foundation, Compressor Shed, Equipment Foundation and CWTP Bldg.
* F02a Hanze Field Development (HHI, Korea, 1999)
Analysis & Design of a Production & Storage Platform Topside facilities i.e. IPD (Integrated Production Deck), Flare Tower & Appurtenances including Oil & Gas Risers.
Inplace, Lifting, Loadout, Transportation, Inplace Fatigue & Redundancy (Fire & Blast analysis) using SACS software.
* FPSO Project at Buffalo field, W. Australia. (BHPP/Schlumberger of Singapore, 1999)
Analysis and design (including transportation and lifting analysis) of process skid.
Inplace design of process skids considering ship displacements and accelerations. Lifting analysis of the skids using spreader frames, design of padeye.
* Reliance Grass Root Refinery - Jamnagar. (1997)
(Design Engineer in core group of Bechtel, London.)
Responsible for design and detail Engineering of Technological structure, Supporting structure of various pressure vessels & heat exchangers. Stair tower. Model clash check between structure and UG services & Piping.
* Revamping of IPCL AF Plant – Baroda, INDIA. (IPCL – Baroda, 1997)
Structural Analysis, design and detail engineering of Pump Shed & Pump Foundations, MTO calculation, BBS checking etc.
* Pilot in situ Combustion project – Mehsana, INDIA. (ONGC – Baroda, 1996)
Structural Analysis, design and detail engineering of various Structures e.g. Walkways, Pump Fdn. MTO calculation, BBS checking etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4201 to 4250 of 9785)

Go to Search Parameters...

Brief Description

A highly motivated, result oriented Industrial Engineer and Quality Management educated to BSc Industrial Engineering.

I am from Ma Foi Management Consultants. I am working as a Global Placement consultant in Energy & Infrastructure vertical in Staffing solutions group of Ma Foi for past 1 year. Prior to Ma Foi I have been in merchant Navy sailing for Maersk Shipping for 2 years.

I'm currently on active duty united states navy, will be available for work 1st Mar, 2008

ASPEN HYSIS, TGNET ,TLNET

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

Electrical o&m enggineer for telcom indrusty

HSE Personnel .Diploma in Mechanical Engineering ,Diplomai n Industrial safety engineering ,doing Bachlor of science in Mechanical .5.6 years of experience in Oil and gas field

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

I am currently working in gas plant located in Ohanet Algeria as a senior DCS control room operator, my responsibility includes making sure that unit is in maximum production and on product specifications of gas, LPG and condensate .

Free! Oilfield pumper, lease operator, supervise pulling units/ workover rigs

Senior Drilling Engineer & Supervisor

11 + years in oil & gas sector, process & operation expert. Master of technology in chem engg

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

I have over 16 years of oil and gas experience in both design engineering and EPC projects in Nigeria and India. I am presently working at L&T, E&C Division, Upstream Engineering, New Delhi as a Project Manager.

1st class Mechanical Engineering diploma in the year 1986. Coordinating of Site Project Management staff for the construction of the Oil & Gas Project.

Millwright Supervision

Over 14 years of experience in the field of Welding Technology as Welding Manager / Welding Engineer in quality control activities of fabricated products such as Boiler & Pressure Vessels, Heat Exchangers, Columns, Storage tanks/spheres, Piping spools and Heavy structural steel items for petroch

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Project Manager

WSS,WSE,WSI, experience on remote,land, desert, harsh environments. Experienced in exploration, oil,gas, appraisal, horizontal well drilling, Experience on all mud types,fishing, sidetracks, well control. Managed many multinational operations. Mentoring junior engineers. Strong QHSE commitment.

Oil/Gas Rotating Equipment / Marine Engineer

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

Fire Marshall or fire Captain

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

Reservoir development, geologic modeling Landmark

I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA

More than 11 years business consultancy, project management, professional engineering and supervisory experience primarily within the oil and gas industry

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

I am looking to be a part of a succesfull drilling team.

I am a Chemical Engineer working in petrochemical co. at Saudi Arabia.

Offshore and onshore experienced engineer looking job in oil and gas field

structural analysis, structural mapping ,petrological and geochemical studies,Msoffice use to.

5.50 yrs Experience in Oil/Gas & Power industries on Rotating Equipments

Document Controller

Assignments in Management System / Quality Assurance / Quality Auditing with a leading organization

BSc (Maths) with 'A' Level in computer

Instrumentation engineer with three year exp in automation field like PLC,DCS,SCADA

Instrumentation engineer with 3 years experience in commissioning and maintenance field

Land Associate- Land Administrator. Sr. Divison Order Analyst. Review title and organize data in land systems. Set up decks and ownership information.

Well developed written and oral communications skill, Computer proficient and hold a Bachelors degree

Filipino Certified Public Accountant looking for Malaysian Job

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 [ 85 ] 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out