Resume - Sr. Instrument Technician

Misco Jobs

Resume #19407

CONTACT INFORMATION:
View contact information...

Application for the post of Sr.INSTRUMENT TECHNICIAN

OBJECTIVE: Work as a team for better future of the Company

EDUCATION:
* Secondary School Certificate (SSC) from Government of Gujarat
* July'1988 to September' 1990 passed Industrial Training Institute
* Passed out November'1996 National Council Trade Vocational Training (IMCP) through Gujarat State Fertilizer Company Ltd. (Govt. of India Approved)

Total Experience: 15years

EXPERIENCE:
July 1997 to Onwards Kuwait National Petroleum Company of Mina Abdullah Refinery, Kuwait through Instrument Installation and Maintenance Co. (IMCO)
INSTRUMENT TECHNICIAN

* Conversant and Hands experience on Honeywell's TDC-3000 for Data Acquisition, Regulatory Control and Sequence Event Recording and the Shutdown system SSD-2000 (ICS) England.
* Responsible for Preventive / Corrective Maintenance of Process Instrument and Shutdown system SSD-2000 (ICS) Fully familiar with running Plant Problems, Trouble Shooting, Routing Maintenance, Shutdown Jobs and Modification Jobs on Heater New Loop wiring had done on shutdown system panel SSD- 2000
* Confident of Commissioning during shutdowns activities such as Installation Loop and Commissioning of Electronics / Pneumatic Instrument in Mina Abdullah Refinery during Augest'1998 General Refinery Turnaround (GRT)

* Instrument Activities like New Loops on ICS panel wiring loops checking and Commissioning of Electronics / Pneumatics Instruments

* TDC-2000/3000(Honeywell)Distributed Control System fully conversant with slot linkage diagram, point tag configuration, selection of subsystem Input and Out put modules

* Allen Bradley and Siemens–Programmable logic controller (SLC-500 and S7- 200)

* Warehouse Material Management System (MMS) and Maximo Multi Access Computing a Material Transaction Processing system. (Item inquiries, Purchase Order Inquiries, Vendor Information)

* Now new Warehouse system for three Refineries (Maximo) our link through networks preparing daily Time sheet, Desktop for Requisition, Queries items

* Some units such a (ARDS / VACCUM Units) up gradation of High Performance Process Module (HPM) Honeywell Co. HPM panel wiring fields loop testing and commissioning under supervisor of Honeywell Co. Engineers

* Fully Conversant calibration on various makes of Pneumatic / Electronic process field / panel instruments such as (Pressure, Level, Flow, Measurement, Direct and Indirect level Measurement) Troubleshooting Relay interlocking panel and Shutdown gate logic system, Control valve, Leveltrolls, Switches, Transmitters, I / P and P / I converters, Indicators, Controllers, Positioners, Solenoid valves, lockup relays, RTD's, Thermocouple, Bentley Nevada series 7200 i.e. vibration Probes Axial Displacement probes.

Achivements:
Mina Abdullah Refinery (KNPC) Kuwait was assigned for the following projects:
- EDMS (Electronics Document Management System) in the instrument maintenance dept. Window NT 4.0 server and 13 Window NT workstation interconnected by the HDSL Network Running Software "Rebries Plantlife Access" packages
- All instruments Tag is registered in the system and can assigned each tag associated with particular document information
- Handle Expansions of ARDS unit with LG Korea and commission system Online Catalyst Replacement (OCR) with fully Automation

October'1996 to July'1997 Nitro Aromatics (A division of Deepak Nitrite Ltd.)
INSTRUMENT TECHNICIAN
* Conversant and Hands Experience on DCS Foxboro (I / A series) Intelligent and Automation series and Bells 761 series controller with its configuration

* Here I closely related calibration, installation and troubleshooting of Magnetic Flow Transmitter make Krohne Mrshall, Foxboro and Rosemount

* Here I worked on various types of field instruments like Pressure, Temperature, Level and Flow using in hazardous chemical Plant

October'1993 to October'1996 Gujarat State Fertilizer Company
TRAINEE INSTRUMENT TECHNICIAN
* Here I got intensive trade training of "INSTRUMENT MECHNIC" (Chemical Plant) in Fertilizer & power Plants like name Capro Lactom, Phosphetic Group, Acid Group (H2SO4), Co- Generation and Utility plants instrumentation and their related Maintenance, Testing, Installation and Calibration

* I worked with Unit Engineers and Yokogawa Eng. On DCS of Yokogawa Centum – XL for New Capro Lactum plant. Also I got intensive training of Construction activities of Field instruments calibration, tubing, installation and wiring up to marshalling racks. Troubleshooting while commissioning plant and their instruments

September'1990 to October'1996 Consolidated Petrotech Industries Ltd.
INSTRUMENT TECHNICIAN
* Here I worked at Petrochemical plant (MEK division) using Germany Technology for plant process.

* I worked on Taylor MOD30 Controller (Microprocessor Base) with configuration, wiring and adjust / feed all Data (Parameters) for Level, Temperature, Pressure, and Flow. Individual shift Technician and Call out shift Technician also during shift authorized for permits issuing and closing under industrial safety rules

Equipment Handle: Various type Calibration equipment handled are Budgenberg Dead Weight Tester, Pneumatic / Electronic Calibrator like Rosemount (262 model), Unomat, Altek, Ecom, Fluke multimeter and HART communicator for smart Transmitters.

SHE TRAINING:
* Attended the Safety Course regarding basic and application of safety in petroleum refinery of Operation and Maintenance personnel
* Conduct by loss prevention department of Kuwait National Petroleum Company of Mina Abdullah Refinery

INTEREST:
* I have good knowledge about Computer Hardware like Assembling, Repairing, Formatting and Downloading all type of software, Hardware Driver and Windows '95, '98, '2000 and 'Xp Professional
* Playing games like indoor chess and out door Cricket etc.

Bases on my working experience I request to you give me an opportunity to prove my ability.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 10924)

Go to Search Parameters...

Brief Description

Oil and Gas Professional

8 years of design, drafting, and field experience allows me to exploit my knowledge of electrical and instrumentation systems.

SAP tachnical consultant

Experienced procurement professional skilled in managing material and equipment, controlling inventory and overseeing quality issues. Proven ability to manage staff and communicate with other departments, vendors, and executive management to ensure procurement goals are met.

I have master degree in architectural engennering, good experiences in construction and architecture designe, I have realized industeriel and reidentiel projects and I have good computer background

Process Engineer (Operations) having more then 7 years hands on experience of refinery operations including Safe startup and shutdown, emergency shutdown, turnarounds, safety standards, hazardous studies, HAZOP, commissioning and startup. Ability in develop and implement operational and safety proce

6 Years professional Experience in PLC, SCADA & HMI Programming

I am a self starter with eyes for innovation and adventure

To work with existing staff and facilities contributing the best of my ability and quota, so as to improve organizational objectives and achieve managerial goals and targets.

Electrical/systems ENGINEER

Creating and developing ideas, analytical skills, self motivated, good team player, ability to work with little or no supervision, good communication skills.

Negotiate Oil and Gas Leases, Determine mineral ownership, leasehold ownership, curative, train, supervise, draft documents, etc.

my education background as well as the full time job assignments during last three years through which I have had exposure and hands on experience in operations and maintenance in power plant engineering techniques make me an ideal candidate for the position.

i have finished my bachelor of mechanical engineering and have a 3yrs experience in piping field with oil&gas sector.currenlty im working as a piping supervisor in kuwiat oil compnay project.preparation of material requestion,execute the isometric drawings,check the bill of materials,prepare a f.c.n

Explorationist

Seeking a challenging career for utilizing a diversified experience span over a period of 2 years as Petroleum Engineer within a dynamic and progressive organization

Experienced Sevice rig Manager

I have very good experience of working on rotary and static equipments.i have worked on planned preventive/predictive maintainence as wllas handelled emergency shutdowns.i am capable of working independtly & can provide leadership to group of workmen.I am aware of the importance of SAFETY .

At present, Working as a Senior Safety Officer with Al Khayarin Group, Site at Ras Laffan Industrial Area Doha-Qatar. from 08/ June /2006 to till date. I did NEBOSH (International General Certificate in Occupational Health and Safety) from SHIELD's (UK).

I have a successful track record in dealing with govermental agencies as well as private landowners. I have worked in all aspects of land work.

Condition monitoring engineer in cement industry for 3 years.

Graduate with Document Control Experience

Please accept my resume as an introduction to the skills and abilities I can offer you. My entire career has been dedicated to supporting internal and external customers. My core goal is to create a positive impact with the organizations I have been affiliated with.

Mircosoft excel, word, powerpoint & cot (chain of title) program

After working on Service Rigs here in Alberta for over six years, I would like to further my experience by working overseas. With my background of rig work, farming, and college, I can push a rig or drill on it.

I have eleven years of experience in Construction, Oil & Gas industries and in other fields too. Good knowledge in Logistical support, Materials Management, Supply Base Operations, Onshore Coordination and in other logistics aspects too.

Strategy development & implementation; Project management; Team leadership; Standardisation & cost reductions; ITIL; Quality Management - ISO 9001; Customer Relationship Management; Programming methodologies; Engineering applications; Excellent communication/negotiation

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

Extensive experience in managing E, H & S programs in South America, Mexico & the United States that resulted in contributing to eliminating serious worker injuries that resulted in effectly established a safe environment. Worked effectively with OSHA CFR 1910 & 1926, EH & S Compliance, NFPA Codes.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Experienced Logistics/Procurement Manager

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

Over 18 years experience in oil and gas industry working in offshore/ onshore fields and base offices at various levels in well services mainly in completions including subsea completions and also in wireline, well testing, well stimulations & workover operations.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Career petroleum E&P, Refining, Laboratory, Technical, Management, Administrative, Patents, Contracts, Sour Gas, Start-ups, Debottlenecking

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out