Resume - Production Manager, Process Engineer, Project Engineer, Metallurgist

Misco Jobs

Resume #19486

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Production Manager
Process Engineer
Project Engineer
Metallurgist
US CITIZEN
Professional Engineer registered in Alberta, Canada ~ 708-426-3990

EDUCATION
Bachelor of Engineering (Metallurgical), McMaster University, Hamilton, ON, Canada
Natural Gas Processing (Grad Chemical Eng. Course), University of Calgary, Calgary, AB, Canada
MBA Course Work, Laurentian University, Sudbury, ON, Canada

EMPLOYMENT HISTORY
PARTNERS PERSONNEL SERVICES 2004 – Present
2914 Nameoki Road, Granite City, Illinois, 62040, 618-451-9145
Quality Control Engineer (Temporary under Contract)
- Assisted a steel foundry's Quality Control Dept reduce the plant's scrap rate.
- Analyzed scrap defects to determine cause and solution. Maintain data-base. Look for trends.

BIG RIVER ZINC COMPANY 2003-2004
2401 Mississippi Ave, Sauget, Illinois 62201 618-274-5000
Production Supervisor (Temporary under Contract)
- Responsible for operations, safety and shift management of the electrolysis department. Managed around 20 unionized employees on the 2nd and 3rd Shift.
- Solved production problems.

THE DOE RUN COMPANY 1999 - 2003
HC 1 Box 1359, Boss, Missouri 65440 573-626-4813
Smelter Metallurgist (Lead-Acid Battery Recycling Division, Boss, MO), 2001-2003
- Technical assistant for operation of blast furnace, reverberatory furnace, refinery, battery desulfurization unit, and wastewater treatment plant.
- ISO 9001-2000 Certified Internal Auditor.
Hydrometallurgist (Mining and Milling Division, Viburnum, MO), 1999-2001
- Technical consultant to international smelters for the Engitec Flubor Process.
- Solved leaching and electrolysis problems during start up and operation of pilot plant. The pilot plant proved the technical and economical viability of the Engitec "Flubor ® Process". The process is the world's first electrowinning lead process.

ASARCO (Encycle) 1995 - 1999
5500 Up River Road, Corpus Christi, Texas 78407 361-289-0300
Facility Manager
- Operations Manager for 3 departments (half of the plant) of a unionized plant.
- Started up a new operational department: revised the process for greater safety; authored the operating instructions; initiated process improvements.
- Achieved higher sustained production by initiating process improvements. The feeds were highly variable, corrosive, caustic, pyrrophoric.

ZINC CORPORATION OF AMERICA 1989 - 1995
P.O. Box 579, Bartlesville, Oklahoma 74005 918-336-7100

Technical Manager
- Retained by senior management during temporary and permanent plant closure. Was a key employee for re-opening the plant under the electrolytic zinc or other novel metallurgical process. Produced feasibility and environmental studies. Operated the chemical laboratory.
- Conference presentations to Canadian and American Zinc Producers Association.
Superintendent of Hydrometallurgy
- Reversed profit-losing situation by solving problems in process chemistry, long-term maintenance, and supervisory and union personnel issues.
- Set several production records for zinc and cadmium tonnage.
- Managed an 80-employee operations department.
Process Engineer
- Technical representative for ZCA. Evaluated Mitsui zinc powder manufacturing technology used in alkaline batteries. The evaluation resulted in a new, jointly owned ZCA-Mitsui plant built in USA in 1996.

NATIONAL LINEN 1986 - 1989
1828 Evans Avenue, Fort Myers, Florida 33901 813-768-0483
Operations Supervisor
- As first line supervisor managed 15 + people in this industrial laundry.

SELF-EMPLOYED CONTRACTOR 1984 - 1986
Red Deer, AB, Canada
Contractor

NOVA CHEMICALS CORPORATION 1980 - 1984
Joffre, Alberta T4N 1V1, 403-314-8611
Project Engineer
- Coordinated the design and installation of a compressor station and Waste Water Treatment effluent diffuser.
- Novacor's representative for the architectural/engineering design of the head office.
- Audited the plant's mechanical integrity to prevent a vapor cloud release.

NORANDA-FALCONBRIDGE-TEXASGULF 1975 - 1980
Timmins, Ontario, P4N, Canada 705-235-8121
Development Engineer
- Co-invented the Zinc Arsenate Process, (still in use after 25 years)
- Designed and commissioned the plant.

ATLAS STEELS 1974 - 1975
1 Center Street, Welland Ontario, Canada L3B 5R7 905-735-5661
Metallurgist
- Physical metallurgist in the rod mill.

LICENSES AND TRAINING
- ISO 9001 – 2000 Certified Internal Auditor
- Recently I have undergone a US government background check as my son is completing his Top Security Clearance for the US Air Force
- Computer skills: Excel, Word, PowerPoint, Access
- HAZMAT 40 hour training, with current annual HAZWOPER training
- Operated: AA & DR Spectro-photometer, wet chemistry, Low Alpha Radiation Detector
- Fluent in Polish. Understand some Russian and French.

PATENTS
Co-Invented the process: The Recovery of Arsenic as Zinc Arsenate and its Utilization in the Purification of Zinc Plant Electrolytes. U.S. Patent 4,240,826

Through my research contributions the Doe Run Company obtained a larger ownership of the patent rights to the Engitec Flubor ® Process.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8851 to 8900 of 10902)

Go to Search Parameters...

Brief Description

fresh graduate from mechanical engineering University of Indonesia. I am a ambitious and hardworking person. My GPA is 3.17. In addition, I am a easy to adapt to new environment.

I am looking for an entry level job in the oil and gas industry. I will graduate with a B.S. in Geology from Kansas State University in May, and will be ready for employment at the end of June.

I am working as a Member of a petrochemicals company of much repute at Haldia, India for the last 4 years. Prior to that I had been working with Coates India Ltd, a chemical company based at Calcutta. I have total 6years experience in the field altogether.

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

branch=EEE fresher location=anywhere

Seeking possible internship/future employment

Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.

I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.

I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.

Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

HSE Specialist

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Production Manager, Process Engineer, Project Engineer, Metallurgist

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,

i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.

Dynamic leader and team builder, consistently motivating others toward success.

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.

Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.

please see below

More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system

Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 [ 178 ] 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out