Resume - I have retired from the US Army so I am not looking for a benefit package, ie… m...

Misco Jobs

Resume #19487

CONTACT INFORMATION:
View contact information...

1998-Present TRANSOCEAN
West Africa
Mechanic
Working offshore as a Mechanic on an Ultra Deepwater Dynamic
Positioning (DP) Drillship. Involved with the maintenance, inspection and repairs of the following drilling equipment:
Varco:
Pipe Racking Systems (PRS-6I)
I have replaced upper and lower drive shaft and bearings, lower and upper cam followers. Lately I have the opportunity to assist in using a column jacking kit.
Top Drive - TDS-4S
I have good experience troubleshooting hydraulic system.
I have overhauled Upper and Lower IBOPs and is familiar with the procedures in replacing the Upper IBOP in record time.

Continental Emsco:
Drawworks Electrohoist V
I have overhauled clutches and replaced gears and driveshafts.
FC-2200 Mud Pump. I have replaced crankshafts, connecting rods and crosshead liners. Also experienced in alignment of the extension rods and liners.

AmClyde Crane: Unit 20000 & 35000 series
Brandt: Mud Agitators, Vacuum Degasser and Shale Shakers.
General: Nissan Forklift, Centrifugal Pumps, and I have overhauled engines of different makes, etc.
I have also maintained and repaired/overhauled Automated Roughneck (AR-3200),
Automated Fingerboards, Hydraulic Power Units, Hydraulic Actuated
Elevators, Conveyors and Automated Casing Roughnecks.

Mechanic
I have retired from the US Army Watercraft field with an honorable discharge.

Responsibilities:
Transported and installed the rigs on the locations.
Exploitation, maintenance and equipment repairs, such as:
All diesel and gasoline Engines (Caterpillar, Detroit, Lambordini,
Mitsubishi) Power Units, Drawworks, Hook Traveling Blocks, Crown Blocks
Mud Pumps (TMS-500), Rotary Tables, Air compressors (SULLAIR).
Assuring a good function of all mechanic and hydraulic equipment's
I worked as a mechanic in automotive shop having the following responsibilities:Repairing and maintenance of different types of cars like; NISSAN, TOYOTA, IVECO, ASTRA, KENWORTH and Halliburton Cementing
Units.
Involved in all aspects of drilling equipment servicing, inspection, repair and overhaul.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4201 to 4250 of 9785)

Go to Search Parameters...

Brief Description

A highly motivated, result oriented Industrial Engineer and Quality Management educated to BSc Industrial Engineering.

I am from Ma Foi Management Consultants. I am working as a Global Placement consultant in Energy & Infrastructure vertical in Staffing solutions group of Ma Foi for past 1 year. Prior to Ma Foi I have been in merchant Navy sailing for Maersk Shipping for 2 years.

I'm currently on active duty united states navy, will be available for work 1st Mar, 2008

ASPEN HYSIS, TGNET ,TLNET

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

Electrical o&m enggineer for telcom indrusty

HSE Personnel .Diploma in Mechanical Engineering ,Diplomai n Industrial safety engineering ,doing Bachlor of science in Mechanical .5.6 years of experience in Oil and gas field

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

I am currently working in gas plant located in Ohanet Algeria as a senior DCS control room operator, my responsibility includes making sure that unit is in maximum production and on product specifications of gas, LPG and condensate .

Free! Oilfield pumper, lease operator, supervise pulling units/ workover rigs

Senior Drilling Engineer & Supervisor

11 + years in oil & gas sector, process & operation expert. Master of technology in chem engg

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

I have over 16 years of oil and gas experience in both design engineering and EPC projects in Nigeria and India. I am presently working at L&T, E&C Division, Upstream Engineering, New Delhi as a Project Manager.

1st class Mechanical Engineering diploma in the year 1986. Coordinating of Site Project Management staff for the construction of the Oil & Gas Project.

Millwright Supervision

Over 14 years of experience in the field of Welding Technology as Welding Manager / Welding Engineer in quality control activities of fabricated products such as Boiler & Pressure Vessels, Heat Exchangers, Columns, Storage tanks/spheres, Piping spools and Heavy structural steel items for petroch

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Project Manager

WSS,WSE,WSI, experience on remote,land, desert, harsh environments. Experienced in exploration, oil,gas, appraisal, horizontal well drilling, Experience on all mud types,fishing, sidetracks, well control. Managed many multinational operations. Mentoring junior engineers. Strong QHSE commitment.

Oil/Gas Rotating Equipment / Marine Engineer

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

Fire Marshall or fire Captain

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

Reservoir development, geologic modeling Landmark

I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA

More than 11 years business consultancy, project management, professional engineering and supervisory experience primarily within the oil and gas industry

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

I am looking to be a part of a succesfull drilling team.

I am a Chemical Engineer working in petrochemical co. at Saudi Arabia.

Offshore and onshore experienced engineer looking job in oil and gas field

structural analysis, structural mapping ,petrological and geochemical studies,Msoffice use to.

5.50 yrs Experience in Oil/Gas & Power industries on Rotating Equipments

Document Controller

Assignments in Management System / Quality Assurance / Quality Auditing with a leading organization

BSc (Maths) with 'A' Level in computer

Instrumentation engineer with three year exp in automation field like PLC,DCS,SCADA

Instrumentation engineer with 3 years experience in commissioning and maintenance field

Land Associate- Land Administrator. Sr. Divison Order Analyst. Review title and organize data in land systems. Set up decks and ownership information.

Well developed written and oral communications skill, Computer proficient and hold a Bachelors degree

Filipino Certified Public Accountant looking for Malaysian Job

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 [ 85 ] 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out