Resume - Research Experience: Polymer solutions and adsorption behavior.

Misco Jobs

Resume #19884

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE: Aiming at a position in a Academic pursuit/Chemical Industry, where
One's ability of Visualization, research inclination and administrative
Skills can suitably be rewarded.

RESEARCH EXPERIENCE:- Polymer solutions and adsorption behavior.
- Solution property studies of water soluble polyelectrolytes q Aggregation and micelles behavior of individual surfactants and in polymer surfactant mixtures.
- Non – electrolytes binary and ternary mixtures evaluation of excess function and theoretical modeling.

WORKING EXPERIENCE:
- Had worked as Project Fellow in UGC major research Project at Department of Chemistry, Sardar Patel University, Vallabh Vidya nagar (Gujarat) from October 10,1994 to April 17,1998. Carried out research work (literature survey & laboratory work) on a specific research problem of "Physico-Chemical Interaction of Water soluble Polymers at solid/aqueous interface". Various physico – chemical methods and also analytical techniques were used to study solution and adsorption behavior of industrial polyacrylamides in aqueous solution as well as in presence of additives.

- Have been working as a Senior Lecturer in Nirma Institute of Technology (One of the renowned Engineering institution of Nation) since July 28,1998 till date. Nature of work involves conducting Lectures, Teaching in classroom, Instructions in Laboratory, Students Assessment and evaluation, Co-curricular and extra curricular activities, Teaching and other duties assigned by the Head of the Department and Director from time to time.

Teaching following subjects at B.E.(Degree) levels:
2 PHYSICAL & ANALYTICAL CHEMISTRY:
Solutions; Catalyst; Photochemistry; Physical Properties and Chemical Constitution; Experimental Techniques in Reaction Kinetics; Measurement of pH; Nuclear Magnetic Resonance; Ultraviolet spectroscopy; Introduction to Chromatography
2 ORGANIC CHEMISTRY:
Alkenes; Stereochemistry; Carboxylic acid; Chemistry of various organic compounds; Petrochemicals; Outlines of Biochemistry; Carbohydrates; Chemistry of selected organic compounds; Polynuclear Aromatic compounds; Chemistry of Heterocyclic compounds; Chemistry of Dyes
2ENGINEERING HEMISTRY:
Organic Reaction; Electrochemical Systems; Surface Chemistry; Reaction Kinetics and Catalysis; Water; Fuels; Lubricants and Greases; Polymers,composites and adhesives; Colloids; Chemistry of conducting materials, magnetic materials and ceramic materials; Corrosion; Introduction to chemistry of oil, fats, soaps, detergents, drugs and antibiotics

INSTRUMENTAL TECHNIQUES KNOWN:
Potentiometer, pH meter, Rheotest meter, Polarography, UV-Vis Spectrophotometer,
Flame photometer, Karl-Fisher, Carbon black dispersion tester, Melt flow indexer, HPLC, GC-mass.

RESEARCH PAPERS PUBLISHED:
1) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(I) Excess volumes and isentropic compressibilities of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Int. J.Thermophysics 17,1289-1304(1996).

2) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(II) Viscosities of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Thermo.Chim.Acta.,294,1-12(1996).
3) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(III)Excess dielectric functions of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Proc.Ind.Acad.Sci.Chem.Sci.108(3),1-10(1997)
4) N.V.SASTRY& P.N.DAVE
Dilute solution behaviour of Polyacrylamides in aqueous media.
European Polymer journal, 00,1-9(1998)
5) N.V.SASTRY &P.N.DAVE
Adsorption Behaviour of Surfactant-Polyacrylamide mixture with kaolin.
Journal of Surfactants and Detergents, Vol.2, No.4,459-472(1999)
6) P.N.Dave & A.K.Bhardwaj
The adsorption behavior of polymeric surfactants of pluronic and tegoprenes in dilute solutions Proceedings, CHEMCON-99, I.I.Ch.E.
7) P.N.Dave & A.K.Bhardwaj
Thermodynamics of micellizationm and interfacial adsorption of polyoxyethylated phenol in 0.01 M NaCl at air-water interface
Proceedings, National Convention of Chemistry Teachers (NCCT-2004)

Research paper Communicated:
1) P.N.Dave, S.S.Sait & N.J.Parmar
Adsorption behavior of polyacrylamide on oxide surfaces.
European Polymer Journal
2) P.N.Dave, S.S.Sait & N.J.Parmar
Thermodynamics of micellization and interfacial adsorption of polyoxyethylated octyl phenol in 0.01 M NaCl at air-water interface.
Journal of Surfactants and Detergents

Research Papers Presented:
- Presented research paper on "DILUTE SOLUTION BEHAVIOUR OF POLYACRYLAMIDE IN AQUEOUS SOLUTIONS" in National Symposium on polymers held at Sardar Patel University, Vallabh Vidyanagar on February 26-27,1996.

- Presented research paper on "THE ADSORPTION BEHAVIOUR OF POLYMERIC SURFACTANTS OF PLURONIC AND TEGOPRENES IN DILUTE SOLUTIONS' IN CHEMCON-99 Organized by I.I.Ch.E. at Panjab University, Chandigarh on December 20 – 23, 1999.
- Presented research paper on "THERMODYNAMICS OF MICELLIZATIONM AND INTERFACIAL ADSORPTION OF POLYOXYETHYLATED PHENOL IN 0.01 M NACL AT AIR-WATER INTERFACE" in 4th National Convention of Chemistry Teachers (NCCT-2004) organized by Gujarat Council of Science City and Department of Science & technology on 30-31st October-2004.

Lectures delivered in AICTE sponsored Short Term Training Programme:

4 Delivered a lecturer on "Phase Transfer Catalysis: An Overview", in a STTP on "Recent Advances in Catalysis and its applications" on 29th November,2004 at Nirma University of Science and Technology, Chemical Engineering Department.
4 Demonstrated an experiment on "To study the effect of time factor on the activity of the enzyme catalase", in a STTP on "Recent Advances in Catalysis and its applications" on 01 st December, 2004 at Nirma University of Science and Technology, Chemical Engineering Department.
4Delivered a lecturer on "Trends in Chemical Industries", on "National Technology Day " on 11th May,2001 at Dintex Dye Chem Ltd.,Ahmedabad.

Book written:
Written Chemistry part in "Dictionary of Technical terms", Shreeji 2002,Publication, Ahmedabad
"Dictionary of Chemicals and Chemistry words", Shreeji Publications, Ahmedabad.

PROFESSIONAL TRAINING:

- QIP certificate course on "Corrosion Control"at IIT,Bombay from May 24,1999 to May 29,1999.
- "Analytical Instrumentation Techniques" Underwent hands-on training on HPLC,HPTLC, GC-mass, AtomicAbsorption spectrophotometer(AAS) & UV-Visible spectrophotometer at Kroma Labs.,Vatva, Ahmedabad from January 06,2000 to January 13,2000.
- QIP certificate course on "Interfacial & Colloidal Phenomena" at IISc,Bangalore from February 21,2000 to February 25,2000.
- "Yoga Teacher Training Programme". Learnt Basic Yoga, Pranayam and meditation techniques at Shivanand Ashram, Ahmedabad from May 10,2000 to May 30,2000.
- UGC sponsored "Refresher Course in Chemistry" at Academic Staff College, Gujarat University, Ahmedabad from March 31,2001 to April 17,2001.
- UGC sponsored "Orientation Course" Academic Staff College, Gujarat University, Ahmedabad from June 02,2001 to 25/06/2001.
- "Programming with C++ "(Full Time) at Nirma Institute of Technology from July 23,2001 to July 28,2001 and two hours a day from July 30,2001 to August 14,2001.
- STTP sponsored course on "Energy Management and Optimization in Chemical Process Industries" arranged during 16th-27th December,2002 at Nirma Institute of technology, Ahmedabad.

AWARDS AND HONORS:
- Received award of Project Fellowship from University Grants Commission, New Delhi for three years.
- Worked as a subject expert for the selection of PG teacher chemistry on 19th April,2002
At Delhi Public School, Ahmedabad.
- Delivered speech on the third "National Technology Day" celebration on 11th May 2001 at Dyntex Dyechem Limited,Ahmedabad.
- The research proposal entitled " Studies on Adsorption Characteristics of Polyelectrolytes at Solid/Liquid Interface and their Influence on Colloidal Stability" has been submitted under the scheme of Financial support for Major research projects in University Grants Commission,New Delhi.
- In Nirma Institute of Technology I had developed laboratories like Physical Chemistry, Organic Chemistry, Inorganic Chemistry and Polymer Science from the scratch and has been actively taking part in the all round development of the chemical Engineering Department.
- As I am working as a Lecturer, I have developed excellent skills and leadership qualities.

EDUCATION:
- Awarded Ph.D. Degree in Physical/Polymer Chemistry from Sardar Patel University,Vallabh Vidyanagar in 1998.
- Passed M.Sc. (Physical Chemistry) First class with distinction (73%) in 1994 from Sardar Patel University,Vallabh Vidyanagar.
- Passed B.Sc. (Chemistry) with First class(60%) in 1992 from Saurashtra University, Surendranagar.

Title of Ph.D. Thesis:
"Studies on Physico- Chemical Interaction of Water Soluble Polymers at Solid/Liquid Interface".

PERSONAL QUALITIES:
* A thirst for knowledge.
* A desire to do good.
* A lust for control.
* Willingness to take stretched targets.
* Confidence to deliver results in highly competitive situations.
* And, ultimately, a messianic visions to feed the world.

STRENGTHS:
* Knowledge of techniques applied to water soluble polymers.
* Scientific approach to problem solving.
* Pragmatic attitude.
* Possess a high degree of empathy, sensitivity to the needs of people and passion to increase knowledge.
* Ambition to grow and ability to learn.

MOTTO:
Firm belief in every disciplined effort, which earned multiple rewards.

Contact Address: 8-Sahyog Apartment
Near Vejalpur Busstop,
Behind Shrinandnagar,
Ahmedabad-380051
Gujarat,India

SPORTS AND OTHER ACTIVITIES:
- Have been Played Cricket at University level.
- Have been Captain of Nirma Education and research Foundation Cricket team.

COMPUTER LITERACY:
A Knowledge of MS-OFFICE,C, C++, Software packages: ISIS draw, HYSIS
And Friendly with Internet

References:
Available on request

Declaration:
I do hereby declare that, to the best of my knowledge, the above information is true and correct.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8951 to 9000 of 10816)

Go to Search Parameters...

Brief Description

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

Operation Manager, International Pipe Inspector by DS-1, (Level II UT, RT, MT & PT) - ASNT-TC-1A

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

Driver, teacher, maintenance computer, air conditioning and electrician

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Excellent working knowledge in field of administration

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

Quality Control professional

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Crane Operator/Deck Foreman, Level III, HLO, Supervisor, Safety Rep

Research Experience: Polymer solutions and adsorption behavior.

I am looking to expand my knowledge and experience in the oil and gas industry, I have 5 years exp. as a well service floorhand and relief derrick hand. I am interested in Offshore drilling or related jobs.

Mechanical Engineer

I am looking for entry level offshore work.

At the present time, I am working as assistant unit controller at PT. PowerGen Jawa Timur ( Private Power Project Phase II Coal Fired Thermal Power Plant 2 x 610 MW ).

To be a part of heighly esteemed organisation where working will be a chellange to my skills.

I have just attained a Diploma in Petroleum Engineering Technology and is presently pursing my B.Eng degree in Petroleum Engineering. I have also learned and applied Project Management to a variety of projects. Also, I have 6 months of both land and offshore experience in the Oil and Gas Industry.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

fresher female engineering graduate having resident visa in qatar

Project Management, Supply Chain Management, Human Resources Management

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Looking for Instrumentation and controls job

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Site Controller / Accountant <<< Cost Controller

I would like to find a diversified employment opportunity where I can continue to learn and grow in both the drilling and completion/work over aspects of the oilfield.

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 [ 180 ] 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out