Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #19925 next resume »»
CONTACT INFORMATION:
View contact information...

QUALIFICATIONS
1987 PhD Petroleum Engineering, University of Tulsa, OK, USA
1984 MSc Petroleum Engineering, University of Tulsa, OK, USA
1979 BSc Geophysics Engineering, Nat. University of Mexico, Mexico

KEY COMPETENCIES
* 20 years of experience in well test analysis and interpretation methods of production data.
* Development of well test analysis techniques based on new analytical solutions and specialized plots.
* Development analysis techniques of production data to estimate reserves and formation properties.
* Specialist skills in well performance prediction for both single-phase and multiphase systems.
* Confident leader and mentor.
* Outcome focused.
* Multilingual: English and Spanish.

WORK HISTORY
2002 – PRESENT
PEMEX, MEXICO
MANAGER OF TECHNOLOGY DEVELOPMENT IN E&P

Responsibilities include:
* Monitor technology applications currently being practised for exploration and production.
* Support assets in the identification of areas for improvement, and propose them the introduction of new technology application opportunities.
* Member of multidisciplinary review group charged with evaluation of all technology development projects in E&P and making recommendations for development or divestment.

2000 – 2002
PEMEX E&P, VILLAHERMOSA, MEXICO
MANAGER OF WELL PRODUCTIVITY

Responsibilities included:
* Monitor technology applications currently being practised for well productivity and reservoir surveillance/management.
* Support assets in the identification of areas for improvement, and propose them the introduction of new technology application opportunities in the topic of well productivity.
* Member of multidisciplinary review group charged with evaluation of all technology development projects in well productivity, reservoir characterization, modelling and simulation, hydrocarbon resource evaluation and reserves estimation, production optimization, and reservoir engineering, and making recommendations for development or divestment.
* Lead the formulation of mentoring and training program in the area of well productivity with the objective of improving their competencies.

1992 – 1999
NATIONAL UNIVERSITY OF MEXICO / PEMEX E&P, MEXICO
HEAD OF PETROLEUM DEPARTMENT AND FULL TIME PROFESSOR

Responsibilities included:
* Initiate, guide and advise work on research and development on reservoir characterization, modelling and simulation, hydrocarbon resource evaluation and reserves estimation, production optimization, and reservoir engineering.
* Authored numerous technical papers for internal and external publications.
* Conducted research projects supported by Pemex E&P on well testing and production decline analysis for both single-phase and multiphase flow systems.
* Teaching courses on Well Testing, Technical Mathematics, and Multiphase Flow in Pipes, in the Graduate Division of Petroleum Engineering.

1991 – 1992
PEMEX, MEXICO
ADVISOR

Responsibilities included:

* Advice the Planning and Coordination Vice-presidency on hydrocarbon resource evaluation, reserves estimation, and production forecasts.

1988 – 1991
MEXICAN PETROLEUM INSTITUTE, MEXICO
RESEARCHER

Responsibilities included:

* Conducted research projects supported by Pemex E&P on well testing, production decline analysis, and inflow performance relationships about naturally fractured reservoirs.
* Authored numerous technical papers for internal and external publications.

1987 – 1988
UNIVERSITY OF TULSA, USA
RESEARCH ASSOCIATE

Responsibilities included:

* Conducted research studies on well testing, production decline analysis, and inflow performance relationships, for solution gas-drive systems.
* Authored technical papers for publications.

APPENDICES

TECHNICAL PAPERS

1. C.O. Bennett, Camacho-V., R.G., A.C. Reynolds: "Approximate Solutions for Fractured Wells Producing Layered Reservoirs", Society of Petroleum Engineers Journal, October 1985.

2. Camacho-V., R.G., Raghavan, and A.C. Reynolds: "Response of Wells Producing Layered Reservoirs", SPE Formation Evaluation, March 1987.

3. Camacho-V., R.G., and R. Raghavan: "Inflow Performance Relationships for Solution Gas-Drive Reservoirs", Journal of Petroleum Technology, May 1989.

4. Camacho-V., R.G., and R. Raghavan: "Performance of Wells in Solution Gas Drive Reservoirs", SPE Formation Evaluation, December, 1989.

5. Camacho-V, R.G. and R. Raghavan: "Boundary-Dominated Flow in Solution Gas-Drive Reservoirs", SPE Reservoir Engineering, November 1989.

6. D.T. Vo, J.R. Jones, Camacho-V., R.G., and R. Raghavan, R.: "A Unified Treatment of Materials Balance Computations", Paper No. CIM/SPE 90-37. Presented in Calgary, Canada, June 1990.

7. Camacho-V., R.G., and R. Raghavan: "Some Theoretical Results useful in analyzing the Well Performance under Solution Gas Drive", SPE Formation Evaluation, June 1991.

8. Camacho-V., R.G.: "Constant Pressure Production in Solution Gas-Drive Reservoirs; Transient Flow", SPE Formation Evaluation, June 1991.

9. Camacho-V., R.G., M. González-R., and H. Cinco-L.: "Advanced Prediction Decline for Optimization of Stimulation", SPE 23578, submitted for publication.

10. Camacho-V., R.G., and M.A.Vásquez-C.: "Comment on Analytical Solution Incorporating Nonlinear Radial Flow in Confined Aquifers (by Sen)", Water Resources Research, Vol. 28, No. 12, December 1992.

11. Camacho-V., R.G., and M.A.Vásquez-C.: "Repressurization Effects Present in a Variable Bubble-point Problem Associated with Multiphase Non-Laminar Flow", presented in Seventh IMACS International Conference on Computer Methods for Partial Differential Equations, New Brunswick, New Jersey, June 22 - 24, 1992.

12. Camacho-V., R.G., R. Padilla-S., and M.Vásquez-C.: "Inflow Performance Relationships with Inertial Effects in the Reservoir", SPE 25481, presented in the Production Operations Symposium, Oklahoma, Oklahoma, March 1993.

13. Hernández-G,H., Samaniego-V.,F., Camacho-V., R.G. and Galindo-N., A.: "Gas Condensate Well Testing Under the Influence of High-Velocity Flow," SPE 26666, presented at the 1993 SPE Annual Technical Conference and Exhibition, Houston, Texas, October, 1993.

14. Herrera, I., Camacho-V., R.G. and Galindo-N., A.: Chapter VII: "Shock modelling in petroleum engineering" book: Computational Methods for Free and Moving Boundary Problems in Heat and Fluid Flow," published by L.C. Wrobel and C.A. Brebbia, Computational Mechanics Publications, 1993.

15. Camacho-V., R.G., and R. Raghavan: "Well Test Analysis in Solution Gas-Drive Systems for Naturally Fractured Reservoirs," SPE Formation Evaluation, March, 1994.

16. Roldán-C., J., Camacho-V., R.G., and Samaniego-V., F.: "Well Testing in Solution Gas-Drive Systems under Non-Laminar Flow Conditions," SPE 35344 presented at the International Petroleum Conference & Exhibition of México, Villahermosa, México, March 5-7, 1996.

17. González-G., J. and Camacho-V., R.G.: "A Horizontal Well Model Considering Multiphase Flow and the Presence of Perforations," SPE 36073, presented at the Fourth Latin American and Caribbean Petroleum Engineering Conference, Port of Spain, Trinidad and Tobago, April 23-26, 1996.

18. Vásquez-C., M., Camacho-V., R.G., and Macias-C., L.: "The Variable Rate Transient Analysis in Saturated Reservoirs," SPE 36122, presented at the Fourth Latin American and Caribbean Petroleum Engineering Conference, Port of Spain, Trinidad and Tobago, April 23-26, 1996.

19. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Padilla-S.,R., and Macias-C., L., "Transient Analysis of Variable Rate Tests for Solution Gas-Drive Reservoirs," SPE Advanced Technology Series, Volume 4, Number 1, 5-13, May 1996.

20. Camacho-V., R.G., Rodríguez, F., Galindo-N., A., and Prats, M.: "Optimum Position for Wells Producing at Constant Wellbore Pressure," SPE Journal, June 1996, Volume 1, Number 2, 155-168.

21. Camacho-V., R.G., Rodríguez, F., and Galindo-N., A.: "Use of Step Function to Solve 2-D Diffusivity Linear Problems with Wells Producing at Constant Pressure," presented in the XI International Conference on Computational Methods in Water Resources, Cancún, México, July 22-26, 1996.

22. Camacho-V., R.G., and Herrera-R., I.: "A Consistent Black-Oil Model with Variable Bubble-Point," an Invited Paper presented in the XI International Conference on Computational Methods in Water Resources, Cancún, México, July 22-26, 1996.

23. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Samaniego-V.,F., and Macias-C.,L.: "New Results on Transient Well Test Analysis Considering Non-Laminar Flow in the Reservoir," SPE Formation Evaluation, Volume 11, Number 4, 237-244, December, 1996.

24. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Samaniego-V.,F., and Macias-C.,L.: " Supplement to SPE 26180, New Results on Transient Well Test Analysis Considering Non-Laminar Flow in the Reservoir," submitted for publication.

25. Prats, M., Camacho-V., R.G., and Rodríguez, F.: "One-Dimensional Linear Flow with Constant Terminal Pressures," Paper 97-32 presented in the 48th Annual Technical Meeting of the Petroleum Society, June 8-11, 1997.

26. Camacho-V., R.G.and Macias-C., L.: "Role of Training in Pemex and Relations with UNAM," poster presented in the Fourth Colloquium on Petroleum Engineering Education, Bakersfield, Colorado, July 1997.

27. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Fuentes, F., and Camacho-V., R. G.: " The Influence of Heat Transfer on the Two-Phase Flow Behavior in a Wellbore During Transient Pressure Tests," Paper SPE 39077, presented in the Fifth Latin American and Caribbean Petroleum Engineering Conference and Exhibition, Río de Janeiro, Brazil, August 30-September 3, 1997.

28. Tellez-C., G. and Camacho-V., R. G.: "Analysis of Capillary Pressure Effects on Well Tests in Solution Gas-Drive Reservoirs," Paper SPE 39898, presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

29. Granados-C., J. and Camacho-V., R. G.: "Analysis of Two-Phase Flow in Horizontal and Inclined Pipes with Mechanistic Models," Paper SPE 39857, presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

30. González-G., Galindo-N., A., Camacho-V., R. G., and Fairusov-V., Y.: "Numerical Simulator to Analyze Short Build-up Pressure Tests," Paper SPE 39892 presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

31. Vásquez-C., M. and Camacho-V., R.G.: "Analysis of Short Pressure Transient Tests Affected by Changing Wellbore Storage," SPE Reservoir Evaluation & Engineering, 261-267, June 1998.

32. Camacho-V., R.G., M. Vásquez-C., and R. Padilla-S.: "New Results on Decline Curves Considering Non Darcy Flow Effects", SPE Reservoir Evaluation & Engineering, 457-466, October 1998.

33. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Fuentes, F., and Camacho-V., R. G.: "A Lumped-Parameter model for transient two-phase gas-liquid flow in a wellbore", SPE Production & Facilities, February, 1999.

34. González-T., F., Camacho-V., R.G., and Escalante-R., B.: "Truncation Denoising in Transient Pressure Tests," Paper SPE 56422, presented in the 1999 SPE Annual Technical Conference and Exhibition, Houston, Texas, October 3-6.

35. Prats, M., Camacho-V., R.G., and Rodríguez, F.: "One-Dimensional Linear Flow with Constant Terminal Pressures," Journal of Canadian Petroleum Technology, Vol. 38, No. 13, 1999.

36. Padilla-S., R., Camacho-V., R.G., Castrejón-A., R., and Samaniego-V., F.: "Inflow Performance Relationships under Gravity Segregation for Solution Gas-Drive Reservoirs," Paper presented in the OMAE-2000 and ETCE-2000, New Orleans, February, 2000.

37. Sampayo-T., A. and Camacho-V., R.G.: "Influence of Non-uniform Initial Pressure Distribution in Well Test Data," Paper SPE 59012 presented in the International Petroleum Conference and Exhibition in Mexico, February 1-3, 2000.

38. Pulido-B., Héctor, Rivera-R., Jesús, Samaniego-V.,F., y Camacho-V., R.G.: "Double Porosity Model with Transient Interporosity Flow and Interpretation of the Response of Tracer Radioactivity in Naturally Fractured Reservoirs," presented in GEOQUEST Forum 2000.

39. Rivas-G., S., González-G., J., Cruz-H., J., Galindo-N., A., Camacho-V., R.G., Islas-J., R., and Pineda-M., A.: "Numerical Simulation of Oil Displacement by Water in a Vuggy Fractured Porous Medium," SPE 66386 presented in the SPE Reservoir Simulation Symposium, Houston, Texas, February 11-14, 2001.

40. Domínguez-V., G., and Camacho-V., R.G.: "Technology Development at PEMEX: "Detecting Research and Technology Development Needs in a National Oil Company"," Paper 72499 presented in the 2001 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 30 September to 3 October, 2001.

41. Domínguez-V., G., and Camacho-V., R.G.: "Continuing Education Needs in PEMEX Exploration and Production," Paper 72504 presented in the 2001 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 30 September to 3 October, 2001.

42. Rodríguez-Román, J., and Camacho-V., R.G.: "Decline Curve Análisis Considering Non-Laminar Flor in Two-Porosity Systems," SPE 74388 presented at the SPE International Petroleum Conference and Exhibition in Mexico, Villahermosa, México, 10-12 February 2002.

43. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Camacho-V., R. G., and Fuentes, F..: "A Lumped-Parameter model for Transient Two-Phase Gas-Liquid Flow in a Wellbore", SPE Production & Facilities, February 2002.

44. Camacho-V., R.G., Galindo-N., A., and Prats, M.: "Buildup Solution in a System with Multiple Wells Producing at Constant Wellbore Pressures," SPE Reservoir Evaluation & Engineering, August 2002.

45. Camacho-V., R.G., Vásquez-C.,M., Castrejón-A., R., and Arana-O., V.: "Pressure Transient and Decline Curve Behavior in Naturally Fractured Vuggy Carbonate Reservoirs," Paper SPE 77689 presented in the 2002 SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September to 2 October, 2002.

46. Poblano, E., Camacho-V., R.G., and Fairuzov, Y.V.: "Stability Analysis of Continuous-Flow Gas-Lift Wells," Paper SPE 77732 presented in the 2002 SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September to 2 October, 2002.

47. Flamenco-L., F., and Camacho-V., R.G.: "Determination of Fractal Parameters of Fractured Networks Using Pressure-Transient Data," SPE Reservoir Evaluation & Engineering, Volume 6, Number 1, February, 2003

48. Del Río-H., J., Camacho-V., R.G., Robles, A., González-T., F., and Santamaría, N.: "Nonlinear Multivariate Optimization of Production Systems Using a Mechanistic Model, " SPE 84050 presented in the 2003 SPE Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October, 2003.

49. Fuentes-C., G., Camacho-V., R.G., Vásquez-C., M.: "Pressure Transient and Decline Curve Behaviors for Partially Penetrating Wells Completed in Naturally Fractured-Vuggy Reservoirs," SPE 92116, presented at the 2004 SPE International Petroleum Conference in Mexico, Puebla, Mexico, 8–9 November, 2004.

50. Padilla-S., R. and Camacho-V., R.G.: "Reservoir Performance Under Solution Gas-Drive and Gravity Drainage," SPE 92186, presented at the 2004 SPE International Petroleum Conference in Mexico, Puebla, Mexico, 8–9 November, 2004.

MEMBERSHIPS

 Society of Petroleum Engineers
 Petroleum Engineers Association of Mexico, AIPM
 National System of Researchers, SNI (Mexico).

AWARDS AND RECOGNITIONS

* Chairman of Education and Professionalism Committee of the Society of Petroleum Engineers, 2001-2002.

* Invitation to participate as a member of Committee for SPE Reprint Series: "Oil and Gas Production Data Analysis", for the Society of Petroleum Engineers, 2001.

* Technical Editor for the SPE Reservoir Evaluation & Engineering of the Society of Petroleum Engineers, since 2001.

* "Instituto Mexicano del Petróleo" Award given by the Petroleum Engineers Association of Mexico (A.I.P.M.), for research and technology development achievements in Petroleum Engineering, Veracruz, Veracruz, Mexico, 2000.

* Member of the National System of Researchers, SNI (Mexico).

* Outstanding Technical Editor for the Society of Petroleum Engineers, 1997 and 2003.

* Member of the Evaluation Committee for Production, for the Stimulus Program for Researchers and Specialists of the Mexican Petroleum Institute since 1997.

* Review Chairman for the SPE Reservoir Evaluation and Engineering, 1997-1999.

* Technical Editor on the Society of Petroleum Engineers Editorial Review Committee, since 1996.

* Member of the "Experts Committee of the Petroleum Engineers Association of Mexico, A.C. (AIPM)", since 1993.

* "Juan Hefferan" Award given by the Petroleum Engineers Association of Mexico (A.I.P.M.), Cd. del Carmen, Campeche, Mexico, 1993.

* "I.M.P." Award given by the Mexican Petroleum Institute, Mexico City, 1990.

* "Juan Hefferan" Award given by A.I.P.M., Querétaro, Mexico,1990.

* "Academic Excellence" Award given by the Atlantic Richfield Company, Tulsa, Oklahoma, 1982.

* Member of Pi Epsilon Tau.

* "Gabino Barreda" Award given by the National University of Mexico, (U.N.A.M.), Mexico City, 1979.

TRAINING

TECHNICAL
2003 Introduction to the Petroleum Geology of Deep Water Depositional Systems - short course, Roger Slatt, University of Oklahoma.
2003 Monte Carlo Simulation –short course, Jim Murtha & Susan Peterson, Society of Petroleum Engineers.
1992 Integrated Reservoir Management – short course, Abdus Satter, Society of Petroleum Engineers.
1990 Horizontal Well Technology – Conference & Exposition, World Oil sponsored by Philip C. Crouse & Associates, Inc.

REFEREES
Available on request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1951 to 2000 of 10902)Go to Search Parameters...
Brief Description
Highly skilled and client motivated commissioning/operations technician able to work to Superintendent level and oversee many different nationalities of staff.
Drilling Supervisor for past 3 1/2 years with previous experience on Contractor side as a rig manager. I am motivated, knowledgeable and organized as a Drilling Supervisor. I have very good people skills and expect the best of people I work with.
Instrument & electrical design and field work
Sr. piping designer/checker, total 21 years experience in oil and gas field
Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word
Reservoir engineer - Experience in tight sands and shale and CBM
I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like
SENIOR DRILLING SUPERVISOR/OPERATIONS MANAGER/ DRILLING MANAGER
34 years in oil industry, toolpush and wellsite supervisor
I have more than 10 years of maintenance experience as an instrument technician
Adaptable, Senior Procurement specialist with international experience in Europe, Middle East and the FSU, with EPC’s, operators and service companies. A buyer, with experience of procurement procedures, expediting, inspections, shipping (incoterms) & customs. Knowledge of sulphuric acid plant procu
Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants
I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline
NDT Level III
My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria
A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading
BSc in env. MSc in safety eng.
Oil and gas economics manager
Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East
Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)
Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.
Iam seeks job for Procurement / Material coorninator
Field Engineer
dcs panel operation for terminal and plant
GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT
Petrophysicist, Log analyst
He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head
Sale and marketing experiences.
Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.
QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .
Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.
I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing
Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.
Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.
Safety Engineer/Professional
Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation
7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD
Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling
SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET
I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.
Well Service / Wireline / Snubbing / Workover Supervisor
I have a good management skills and experiences in various areas of operations. I am particularly aware of the Operation / construction / Commissioning and start up for Oil and Gas industries.
Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.
Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies
Field & office design, using PDS program, review drawing before send to approved
Senior instrumentation and controls maintenance. Commissioning Supervisor specially
Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages
Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.
SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   [ 40 ]   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com