Resume - Formation damage, workover candidate selection, hydraulic fracturing, production...

Misco Jobs

Resume #2001

CONTACT INFORMATION:
View contact information...

Knowledge Areas

Multiphase Flow
Computer software development for simulation of multiphase flow in pipelines and networks. Multiphase flow transport simulation. Multiphase flow gathering network evaluation. Production optimization through completion system design.

Heat transfer
Simulation and computer software development for permanent and transient phenomenon: large pipelines, pipelines networks and porous media.

Crude oil Transport
Heavy oil transport simulation and evaluation. Computer software development for simulation of transient and non-isothermal heavy oil transport in batches.

Production Enhancement, Oil and Gas Wells.
Hydraulic fracture stimulation design and job planning execution. Experience using computer software to model hydraulic fracturing. Performed quality control tests for stimulation fluid systems and proppants options. Technical-economical analysis for the stimulation treatments selection and design. Evaluation of production increases profile by pre and post formation testing. Screen-Less Completion for Sand Control for Oil and Gas wells. 2D simulation of down-hole heating using Radio Frequency sources.

Integrated Analysis, Oil and Gas.
Optimization of production based on the simulation of fluid flow through porous media, completion and surface pipelines networks. Analysis of the optimal drainage architecture as a part of the completion system. Production analysis for horizontal and vertical wells. Familiarity with drilling operations and reservoir engineering.

Technical Goals

• Generation of new technological concepts based on nano-technology, in the area of petroleum well construction, with operational and economical impact in the order of 60 % to 40 % in comparison with the present technology.

• Technical coordination of multidisciplinary teems integrated by specialists in drilling, completion, cementing, drilling fluids, materials, polymers, production enhancement and optimization, in projects of R&D, in the area of well construction, completion, production optimization and production enhancement.

• Incorporation of far market technology in the company business strategies, as a result of the creation of five R&D projects. Technical coordination of a joint venture project, with an European research center in Germany, achieving the establishment of nano-technology projects for PDVSA.

• Coordination of production problems evaluations in horizontal wells at Petrozuata Fields, Orinoco Belt - East Venezuela, using monitoring techniques at the horizontal section, reservoir characterization data, (including well testing, petrophysics and seismic data) and reservoir-well flow simulations. It was possible to define the optimum technology to be used for work-over operations and the definition of the fish-bond multilateral draining architecture, nowadays implemented.

• Development and implementation of candidate selection methodology for work-over, based on multivariable analysis techniques. Achieving a time reduction of 60% in the candidate process selection with an optimization of the economical resources used for work-over operations.

• Computer software development for simulation of new down-hole heating technology (based on nano-technology).

• Implementation of Screen-Less Completion at West Venezuela, (Santa Rosa Field), to prevent sand production, achieving a 100% reduction in sand production in the wells where it was applied.

• Implemented and evaluated new technologies in order to select application areas and marketing strategies.

• Technical support and development of computer programs in areas related to crude oil production. Reduced crude oil transport pipelines designs costs by 70 %, through the use of developed programs. Temblador - Caripito 150 Km pipeline – East Venezuela.

• Leaded teams work for simulation programs development in multiphase flow in piping networks, and transient phenomenon like non-isothermal crude oil batches transport.

• Coordinated teams work for large pipes thermo-hydraulic designs and technical-economical evaluations of crude oil transport in projects between PDVSA, MOBIL, ARCO, CONOCO and TOTAL, East Venezuela.

• Evaluation of water-hammer effect in the re-engineering project for the principal crude oil shipping port in Venezuela -JOSE - which handles 900 MBD.

• Designed and implemented computer programs for gas-lift optimization in Maracaibo Lake gas injection piping networks, with a 40% efficiency increase.

• Technical-economical evaluations in non-conventional crude oil and gas transport methods.

• Hydraulic fracture design and execution in the East and West of Venezuela with a pre-treatment production increase between 2 to 3 times the original well production.

• Evaluation of work-over techniques, production enhancement treatments and completion options, including the technical feasibility of commingled production, in a mature light crude oil field “Pato Field”, East Venezuela.

Education

• Mechanical Engineer . Universidad Central de Venezuela, Caracas, December 1995.

Employment experience

• Nov. 1998 – present - PDVSA-INTEVEP
Position: Research and Technical Support Engineer – Well Construction Department
Working Areas: Formation damage analysis, work-over candidate selection, hydraulic fracturing design and execution, production optimization in vertical and horizontal wells, evaluation of new technologies for production enhancement, development of new R&D projects for drilling, completion and production enhancement based on nano-technology.

• Sep. 1997 – Nov. 1998 HALLIBURTON Energy Services, Inc.
Position: Well site Engineer-Production Enhancement
Working Areas: Hydraulic Fracturing design and execution, coiled tubing operations, matrix acidizing, carbonate acid fracture, cementing. 5 Months field training in the United States (Oklahoma and Texas).

• Dec. 1995 – Sep. 1997 - PDVSA-INTEVEP
Position: Research and Technical Support Engineer – Production Department
Working Areas: Software Design and Programming for multiphase and single-phase flow simulations including transient phenomenon. Oil and gas network and large pipelines analysis and optimization. Nodal analysis and well-surface integrated analysis.

PDVSA, fourth petroleum exploration & production company around the world.
INTEVEP-PDVSA is the research and technical support center For PDVSA, handling over 2000 employees and leading projects related to oil and gas exploration, production and transport, surface facilities, drilling, orimulsion, and agreements with North America and Europe Universities and Research Centers.

HALLIBURTON: Recognized as the first oil service company in the world

Patent and Paten Application

• Method and Apparatus for Drilling and Completing a Well.
US Patent 6,481,501
European Patent Number: 01130066.2-2315 / Designated States: AT BE CH CY DE DK ES FI FR GB GR IE IT LI LU MC NL PT SE TR.
Inventors: Chavez, Juan Carlos; Douglas, Alexander Espin; Genolet, Luis Carlos; Jimenez Maria Alejandra; Ranson, Aaron.

• Method for Consolidation of Sand Formations using Nanoparticles.
US Patent Application 20020117302 - SN 796,255
Inventors: Douglas, Alexander Espin; Chavez, Juan Carlos; Ranson, Aaron.

• Method for Heating Subterranean Formation, Particularly for Heating Reservoir Fluids in Near Well Bore Zone.
US Patent Application 20020121374 - SN 796,761
Inventors: Ranson, Aaron; Genolet, Luis Carlos; Douglas, Alexander Espin; Chavez, Juan Carlos.

• Composition and Method for Sealing an Annular Space Between a Well Bore and a Casing.
US Patent Application 20020129939 - SN 809,871
Inventors: Douglas, Alexander Espin; Chavez, Juan Carlos; Jimenez, Maria Alejandra; Genolet, Luis Carlos.

• Method for Treating Drilling Fluid Using Nanoparticles.
US Patent Application 20020123431 - SN 797,741
Inventors: Jimenez, Maria Alejandra; Genolet, Luis Carlos; Chavez, Juan Carlos; Douglas, Alexander Espin.

• Water Base System for Altering Wettability of Porous Media.
US Patent Application SN 928,568
Inventors: Douglas, Alexander Espin; Ranson, Aaron; Chavez, Juan Carlos; Araujo, Yani Carolina; Araujo, Mariela; Douglas, Alexander Espin.

Reports

• Mini Lateral Drilling Technology: Technological Intelligence about Penedrill Tool. PDVSA-Intevep, S.A., 2001.
• Production Optimization for the Field Laboratory of Santa Rosa Using the Mini Lateral Drilling Technology. PDVSA-Intevep, S.A., 2000.
• Integrated Field Laboratory, Tia Juana Lago. Productivity and profitability of under balance drilling wells in low-pressure reservoir. INTEVEP, S.A., 1999
• PDD-PATO-PATO ESTE. Perforation fluid and formation damages analysis. INTEVEP, S.A., 1999
• Thermo-hydraulic evaluation of crude oil pipelines. INTEVEP, S.A., 1997
• Water-hammer analysis Jose shipment port pipelines. INTEVEP, S.A., 1997
• Deep-water shipment port technical feasibility, batch transport analysis. INTEVEP, S.A., 1996
• Deep-water shipment port technical feasibility, oil pipeline Caripito-Guiria. INTEVEP, S.A., 1996
• Numerical Algorithm to calculated multiphase flow transport through piping networks. INTEVEP, S.A., 1995.

Thesis Tutorials

• D'AMICO, B. Experimental Evaluation of Densifier Systems for the Drilling Process. Work of thesis to obtain the Chemical Engineer Degree. Universidad Simón Bolívar (Simón Bolívar University) - PDVSA Intevep. March, 2002.

• BOSSIO, B. Behavior Simulation of Electromagnetic Waves in a Porous Media. Work of thesis to obtain the Mechanical Engineer Degree. Universidad Simón Bolívar (Simón Bolívar University) - PDVSA Intevep. June, 2002.

• PEREZ, C.Y. Well Selection for Production Stimulation Applying Multivariate Statistical Methods. Work of thesis to obtain the Geophysicist Engineer Degree. Universidad Simón Bolívar (Simón Bolívar University) - PDVSA Intevep. January, 2001.

Courses

• Hydraulic Fracture Workshop, Huston TX, 2001
• Formation Damage, PDVSA_INTEVEP, Venezuela, 1999.
• Well Costruction, PDVSA-INTEVEP, Venezuela, 1999.
• Stimulation Design for Engineers, Duncan, OK. 3 weeks. Aug. 1998.
• Modern Completion Practices, Duncan, OK. 2 weeks. Jul. 1998.
• Frac-Pro, Duncan, OK. 1 week. Jun. 1998.
• Practical Stimulation Design, Duncan, OK. 2 weeks. May. 1998.
• Coiled Tubing, Duncan, OK. 2 weeks. Mar. 1998.
• Blow out control and prevention, Venezuela. 1 week. Jan. 1998.
• Cementing, Venezuela. 2 weeks. Jan. 1998.
• Fundamental of Petroleum, INTEVEP. 1 week.1997.
• The seven habits of highly effective people, INTEVEP. 1 week, 1996.
• Petroleum Production, INTEVEP. 3 weeks. 1996.
• Multiphase flow in pipes, INTEVEP. 1 week. 1995.

Computer skills

Programming Languages:
• Fortran, BASIC.
Simulation Programs in the Areas of:
• Multiphase and single phase flow.
• Heat transfer analysis.
• Transient analysis.
• Hydraulic fracturing simulation.
• Acid Stimulation.
• Nodal Analysis.
• Production Analysis.
3D Graphic Visualization and Designs Programs:
• Caligari TrueSpace, Bryce3D, Micrografx Simply 3D, Working Model 3D, VRCreator.
Wave Page Design Program:
• Flash Macromedia.

Languages: Spanish and English

Affiliations: Venezuelan Association of Engineers – Member No.113223
SPE – Member No. 1803935

References: Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6701 to 6750 of 9785)

Go to Search Parameters...

Brief Description

10 years - administration.

OBJECTIVE Seeking a professional position in the Mechanical Engineering (QA/QC) industry, where I can effectively utilize my technical skills and experience.

L3 Absailer, various rigging projects, painting, blasting, manageral position

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

I speak English , Spanish and Russian language.

Seeking a position as a Floor hand where my experience, training and good work habits will be an asset to your company.

Morethan 11 years experienced HSE Professional. Holder of NEBOSH international General certificate and Diploma in mechanical and Industrial Safety. Worked with Oil and Gas, Civil and marine Projects.

I have 3 years mechanical school and after I stay for 4 years as a motordriver on a big fishing boat and 3 years in a production fabrik as mechanich

Well testing technician

Marine Engineer - (BSc.) in Mechanical Engineering with Specialisation in Marine Technology & Naval Architect

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

21 Years Petro/Chem construction industry, including four years in a fabrication facility, together with offshore maintenance and post hook-up projects. Working as a Certification Engineer for many years prior to my current post. I am currently almost eight years in Qatar with Qatar Petroleum

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

I have 14 years of experience in Human Resources Management, Business Planning, Sales, and Customer Service in leading organizations in Egypt and abroad.

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

A chemical engineer with 30+ years successful track record in oil & gas, EPC and chemical industries in India and abroad seeking contract jobs or assignments

In my 23+ years working in the geothermal fields in the Philippines, I have developed skills engineering, management, administration, safety and other disciplines. I feel that I am qualified for any geothermal job.

Strong background including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, safety, quality assurance, report preparation, and client relations.

Strong background in many areas including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, meetings coordination, quality assurance, report preparation, and client relations.

Two years pipeline experience, a pipeline engineer with course done fron indian institute of technology bombay.

good enogh in english, good techinical skills.

Contact Details Personal Profile Professional Profile Academic Qualifications Non-Academic Details Computer Abilities Work History Detailed Working Experience.

To share my expertise, to be a team player in the organization, I have an excellent understanding & have Over 16 years experience in maintenance, installation, diagnoses, troubleshooting, Configuration and repair of Computers, Fax Machines and Printers, With excellent verbal and communication skills

Title: Senior Geophysicist

Leading the implementation of HSE policies and practices

Operations Manager, Strategic Planning, R&D, Business Development, Budgeting, Forecasting, Lean Manufacturing Leader

B.E., MSc, Chemical Engineer, Project: Nitrate and Nitrite Remediation of Microbially Influenced Corrosion and Souring of Oil Reservoirs due to Sulfate Reducing Bacteria

Experienced Roughneck, speak 2 languages, will travel anytime

Free! VSAT Field Technician, Schlumberger

Job included design, electrical & pneumatic installation, programming and performs as instructed in the company’s project of robotic and automation. Have exposure to perform troubleshooting and maintenance machine. I have certificate of attendance “Intensive Hands-on Manufacturing Course for Manufac

AUTOMOBILE SALES MANAGER; FORMER U.S. ARMY STAFF SERGEANT, PETROLEUM SUPPLY SPECIALIST WITH LOGISTICAL BACKGROUND

1999-2004 Master student of the Technical University of Cluj-Napoca, Control Engineering and Industrial Automation Department. Graduated in June 2004, Language of study: English. Experience in Siemens Simatic, Siemens WInCC, SCADA

personal info/qualifications

I am a very skilled Planning Engineer with a great experience in Primavera P3 (10 years) and Primavera Enterprise P3E

production engineer for the Lagomedio Unit at PDVSA E&P.He worked in Maracaibo Lake’s oil fields developing in different positions. He holds an engineering degree in information engineering from the UNITEC, Venezuela, and a Minor in Reservoir Engineer in “CIED”, Maracaibo, Venezuela

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

qualification: B.E (Chemical Engg.) Industrial Training: Cipla ltd. (one month)

Electrical Fitter with experience as a Condition Monitoring Technician/Project Manager since 1994. Highest skill level in Predictive Diagnosis. (Vibration Analysis, Oil Analysis, Wear Debris Analysis, Thermography, Ultrasonic Detection, High Voltage and Low Voltage motor testing).

Formation damage, workover candidate selection, hydraulic fracturing, production optimization, R&D for drilling, completion and production enhancement based on nano-technology, coiled tubing, matrix acidizing, acid fracture, cementing, multiphase flow simulation and programming.

I am a Bachelor degree holder in Computer Information Systems from Ajman University of Science and Technology in Abu Dhabi / UAE 2002 with excellent Analysis, Developing and English communication skills. I feel that I could be very useful to fulfil the work you are doing within your departments.

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

Totco Institute of Secretariat Studies .Diploma in Computer Science. Ladoke Akintola University of Technology, Ogbomoso.B Tech in Chemical Engineering Oil and GAs recording Using Oracle Database Programme. Calculation of deferment in Oil and Gas Computation Well Test monitoring and surveillance.

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objectives: As a mechanical engineer I am: - seeking an engineer position in oil & gas Industry - willing to get field experience and use gained knowledge in practice - able to study new equipment and technologies - looking for a new career opportunities

Objective: A challenging and rewarding position in a fast-paced, entrepreneurial corporate environment where my leadership and people skills will be utilized to my maximum potential.

Drilling Fluids Research.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 [ 135 ] 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out