Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2002 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
To work in Process Development and Basic Engineering of Refinery, Petrochemical, Utilities and Offsite systems.

EDUCATION
Bachelor Of Technology (B.Tech) Honours in Chemical Engineering from Indian Institute Of Technology (I.I.T), Kharagpur, India, 1983.

MAJOR JOB EXPERIENCE
Company: Engineers India Limited (E.I.L), Process Design & Development Department, New Delhi, India.

2001 to present, Senior Manager

o Presently working on developing and making a proposal of an extractive LPG treating /catalytic caustic regeneration technology - first one for my
company.

o Licensor selection for Hydrocracker, Hydrogen and Delayed Coker for a grass root 9.0 million tons per annum refinery for Hindustan Petroleum Corporation Ltd, India.

o Process simulation and Basic Engineering for Gas Oil ASTM T95 improvement for a 1.35 million tons per annum crude unit for Bongaigaon Refinery & Petrochemicals Ltd, India.

1996 to 2001, Manager

o Basic Engineering of a 6.0 million tons per annum Crude & Vacuum Distillation unit for Bharat Petroleum Corporation Limited at Bombay, India. Improvised the design to consume lowest energy as compared to our earlier designs. Did utilities, steam/power balance and flare adequacy check for this expansion for the entire refinery.

o Configuration study on Motor Spirit(MS) Benzene reduction and Diesel Sulphur,T95 reduction for three existing refineries at Panipat, Gujarat and Mathura for Indian Oil Corporation Limited.

o Basic Engineering of a 2.3 million tons per annum Lubricating Oil type Vacuum Distillation unit at Haldia, India, for Indian Oil Corporation Limited.
While doing this, solved viscosity blending problem in PROII simulator.

o Residual process/detailed engineering of a 1.2 million tons per annum once through Hydrocracker (licensed by Chevron, USA ) at Mathura, India, for
Indian Oil Corporation Limited.

o Basic Engineering of Utilities/Offsite and 840 tons per day of Sour Water Stripper for Mathura Refinery, India, for Indian Oil Corporation Limited.

1992 to 1996, Deputy Manager

o Worked jointly with Chevron (USA) in Basic Engineering of a 1.1 million tons per annum full conversion Hydrocracker at Numaligarh, India, for
Numaligarh Refineries Limited.

o Basic Engineering of a 306,000 tons per annum Vacuum Residue feed Delayed Coker at Numaligarh, India, for Numaligarh Refineries Limited.

o Basic Engineering of a new 1.35 million tons per annum Crude Distillation unit at Bongaigaon, India, for Bongaigaon Refineries & Petrochemicals Limited.
Basic Engineering of a new cooling water system and adequacy check of existing flare system of the refinery.

o Detailed Project Report for expansion of a Delayed Coker from 336,000 to 440,000 tons per annum at Guwahati, India, for Indian Oil Corporation
Limited.

o Detailed Project Report for energy / distillates yield improvement of an existing 500,000 tons per annum Delayed Coker at Barauni, India, for Indian Oil
Corporation Limited.

1988 to 1992, Senior Engineer

o Detailed & Residual Basic Engineering of a 50,000 tons per annum Ethylene Glycol plant (licensed by Union Carbide, USA) at Nagothane, India, for Indian
Petrochemicals Corporation Limited.

o Basic Engineering Design (extension of Licensor UOP study report) for expansion of a Linear Alkyl Benzene plant from 31,500 to 50,000 tons per annum at Baroda, India, for Indian Petrochemicals Corporation Limited.

o Detailed Project Report for capacity debottlenecking of an existing 18 tons per day of Acrylic Ester plant at Baroda, India, for Indian
Petrochemicals Corporation Limited.

1985 to 1988, Engineer

o Basic Engineering for expansion revamp of Ethylene Glycol plant from 10,000 to 15,000 tons per annum at Thane, India, for National Organic Chemical
Industries Limited.

o Licensor evaluation for a 50,000 tons per annum Ethylene Glycol plant at Nagothane, India, for Indian Petrochemicals Corporation Limited.

1984 to 1985, Junior Engineer

o Study report on improving reactor cooling system to achieve higher catalyst activity in a 6000 tons per annum Phthalic Anhydride plant for Herdillia Chemicals Limited, Bombay, India.

o Detailed Project Report for feedstock change over to ortho-xylene from naphthalene of a 6,600 tons per annum Phthalic Anhydride plant at Durgapur, India, for Durgapur Chemicals Limited.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2051 to 2100 of 9785)Go to Search Parameters...
Brief Description
I am urgently looking for a job on an Oil or Gas rig. I have a high school and Waste Management diploma. I also have 23 years of experience in managemet. I am willing to learn new skills
Production and exploration test ranging from high volume critical sour wells incorporate multiple separators, line heaters, circulating and transfer pumps, to sweet shallow gas testing. Experienced in well testing with high content of H2S, CO2. Experienced in HP/LP separators, pumps and oil producti
CV
Effective communication, team building, annovative
Electrical Technician, Ross Hill and IPS SCR drives, Varco Top- Drives
Mechanical Supervisor(Power Plant). Have work experience in Pakistan Navy also.
Shift supervisor in LNG plant, commisionning engineer; productio manager, project maager
Having 11 years of rich experience in Project coordination and Procurement of Oil and Gas EPC projects.
Over 11 years Elec & Instrument &Control Engineering and Detail Design in Downstream Oil&Gas,Petrochem, Energy. Field Instrument Specs, Construction Dwgs, Site Supervision, FAT of Control Systems, Supervisory Role.
I am a Senior Structural Engineer with detailed design, field engineering, fabrication supervision and hook-up experience in the offshore oil and gas industry. I have gained a solid technical background and practical outlook by working on site in the oil and gas industry.
The solid luggage of my experience and my expertise in the exploitation and trainee, having formed with the most powerful methods and having applied them successfully, I am seeking a position to contribute for the progress of a leading multinational organization. I am presently in the retirement and
Expert in Well Stimulation (Hydraulic Fracturing, Acidizing) and Sand Control and highly experienced in sand face completion, production optimisation and FDP
I have done three years course in CHEMICAL(Plant Operation),NCVT, From Bhandara (Maharashtra) and having over 21 years of experience( Three years gulf expereance) of PreCommissioning/Commissioning of Petrochemical Gas(gasco, buhasa) And Chemical plants.
Laborer
I have 26 years Welding experience, including 3 years Fabrication, Welding and Maintenance on Oil & Gas Drilling Rigs, associated equipment and infrastructure. I am currently employed as a Welder for Drilling Contractors on an onshore Oil & Gas Rig at Fairview Gas Field with a 2 on 2 off roster. My
Training Coordinator, over (16) years of experience in petrochemical plant operations, and over (2.5) years of experience in the field of training.
HSE technician, Safety officer, HSE Advisor
Piping Designer PDS administra
Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.
Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.
Operations Manager - 18-yrs experience - Russia, China, SE Asia, Europe & US. Background in drilling, production & well servicing. Experienced with G&G & reservoir. Extensive experience in tendering & contract negotiation. Line management responsibility of budgets of >$250M.
Having a Diploma in Mech. Engg. with 18 years of Experience in Designer
Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.
I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.
Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring
Currently i work as offshore field service technician provides the service for the application of High Density Polyurethane Foam (HDPUF)
An outstanding background of more than 18 years of working in oil and gas industry with Saudi Aramco with proven hands-on extensive experience in oil and gas fields, operational and maintenance on-field, control room and site office.
A Mechanical Engg gradute having over two decades of experience of whole gambit of SCM including Global contracts & procurement , e-procurement, Negotiation,Dispute Resolution & Conflict Manament, Warehousing , SRM, etc in a very large MNC , Public sector oil & gas E&P( down steam/upstream)
Petroleum Engineer
9 yr experience in Design,development,implementation & Delivery of SCADA Projects
More 15 years experience in Blasting/Painting Inspector and Supervisor both offshore and onshore work in oil and gas/Plant and FPSO project.Familliar with the all painting specification and colour code
6 years overall experiance in oil & Gas / Petrochemical Industries
A Chemical Engineer (B. Sc., M.Sc.)
I have 9 yrs experience as a Planning Engineer in Oil and Gas sector, please let me know if any suitable vacance available for my knowledge and Experience.
Now i'm working in Qatar as a store keeper, i have more than 6 years experience in this field , i'm working in oil field project
* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.
Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company
15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.
18 years experience in process design of refinery and petrochemical units.
Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.
Expand on my knowledge, skills and abilities to grow both personally and professionally making genuine impact in the organization. I like to be part of a geological, geophysical and petroleum engineering team that uses all disciplines to meet their goals.
I am a chemical engineer having over 18 years experience (8 years in Petroleum Development Oman – a Shell Group Operating Company) in the Exploration & Production petroleum industry covering onshore as well as offshore locations, particularly in Well Services operations in Oman and India.
A talented multi-lingual business professional with more than 10 years expertise in domestic/international business, market, and product development increasing market share by 30% and sales by 20%
A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.
I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.
More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.
6 years experience in the field of Mechanical, Piping Engineering Design / Drafting. A variety of successful projects for oil & gas, chemical and cement plants. Design, Drafting, CADD, and checking experience that includes supervision, conceptual layout, piping design, pipe supports, fabrication dra
Instrument and metering technician
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   [ 42 ]   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com