Resume - Corrosion Engineering consultant

Misco Jobs

Resume #20154

CONTACT INFORMATION:
View contact information...

EMPLOYMENT HISTORY
2004 – Jan 2005 Ministry of Electricity and Water, Kuwait

Pipeline Consultant

Consultant on Evaluation of pipelines for Fitness-for- Service and refurbishment techniques, evaluation of intelligent pig data, External Corrosion Direct Assessment (ECDA), Internal Corrosion Direct Assessment (ICDA), Writing of Pipeline Engineering Standards and procedures, sleeving, welding, and replacement of deteriorated pipelines.
Evaluating new pipeline technology that becomes available for pipelines in general. Write new Operation and Maintenance manuals for MEW personnel.
Advise on Corrosion Monitoring, chemical treatments and recommend remedial course of action when necessary.
Advise on pipeline maintenance procedures and evaluate failures of pipeline, valves, instrumentation etc.

2001 – 2004 CC Technologies, Dublin, Ohio, USA

Lead Consultant Kuwait Corrosion Audit for Kuwait Oil Company

Lead Consultant within Kuwait for a multi million dollar, two-year "Internal Corrosion Monitoring Program" contract with Kuwait Oil Company. The Project comprised of 100 corrosion and material related tasks
Supervised Senior Consultants sent from the USA and Canada to perform tasks related to the project and the operation of the local office
Surveyed all KOC facilities for design, materials of construction and operation problems
Collated, proof read and corrected all task reports and ensured their submittal to the Kuwait Oil Company
Wrote a material selection for construction task report for facilities operating and expected to operate in sour service
Liaised between the different involved departments within KOC and the CC Technologies Consultants

1982 – 2001 SAUDI ARAMCO Saudi Arabia

Engineering Specialist Consulting Services, Dhahran,

Responsible for advising on material selection, fitness-for-service and failure analysis for the world's largest seawater treatment plant and injection system. Authored a materials selection manual for equipment used within water injection facilities.
Advised Project teams in commissioning and resolving material, corrosion and welding problems for a new multi billion-dollar natural Khuff gas development programme within Saudi Arabia.
Wrote and developed relevant Saudi Aramco Engineering Standards and ensured they and relevant International standards were used during construction of new projects
Reviewed at design stage materials for use in new and existing plant construction. Responsible for reviewing and over-seeing testing of specific Vendor equipment for operation suitability
Co-authored a fitness for purpose programme for corroded pipe and vessels
Wrote user-friendly computer programmes for use by Inspection and Corrosion personnel in the field to evaluate piping, flares and vessels when modifications or repairs to corroded or mechanically damaged equipment was required.
Specialist advisor to Saudi Aramco field Engineers in the Southern area of Saudi Arabia on material selection, failure analysis, design. Evaluation of inspection data gathered from piping and vessels, welding, repair procedures, corrosion monitoring, cathodic protection and work scopes for contractors. Advised Maintenance shops within Saudi Aramco in developing repair procedures, selection and identification of materials used in repairs of vessels, piping, heat exchangers and valves.
Advised Drilling, Well Services, and Field Development on material selection, wireline problems and wellhead equipment failures.
Developed a repair procedure for refurbishing wellhead-landing bases that have severe external corrosion problems.

1980 - 1982 SHELL EXPLORATION and PRODUCTION Aberdeen Scotland,UK

Corrosion/Materials Engineer

Responsible for advising on and specifying cost effective materials of construction, coatings, cathodic protection (sacrificial anodes) and management of a corrosion monitoring programme for off-shore platforms
Initiated the computerisation of corrosion data collected from Shell Brent, North sea off-shore platforms
Designed and implemented a corrosion-monitoring programme installed in St Fergus, Scotland, gas treatment plant.
Analysis of mechanical, valve, piping, vessels, heat exchangers, coating and CP failures that occurred to equipment used in offshore platforms.
Responsible for arranging with Universities or Research Centres specialised failure analysis or research projects regarding materials and corrosion problems.

1968 - 1980 SHELL CHEMICALS U.K. Ltd. Manchester, UK

Chemical/Corrosion Engineer

Responsible for the running and maintaining of a metallurgical laboratory used in analysing and evaluating materials of construction and plant equipment failures.
Assisted in developing techniques for examining metallurgical failures, testing of materials proposed for use in new projects
Assisted in developing an on site test for liquid metal embrittlement that may occur after a plant fire.
Tested and advised on acceptance or rejection of new vendor equipment and materials of construction considered for use in a Chemical plant
Prepared and presented to Management, Engineering findings and recommendations on failed equipment or research projects.
Reviewed materials of construction proposals issued by Contractors for new projects.

EDUCATION
University of Manchester/UMIST, Manchester. UK
BSc. Chemistry and Chemical Engineering – postgraduate certificates in Metallurgy and Microbiology.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 9906)

Go to Search Parameters...

Brief Description

All aspects of seismic data processing - signal processing, velocity modeling, migration

Construction Manager

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, Shutdown Coordinator with over 16 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Over 20 years experience in the Health, Safety and Environment Field in supervision, training, auditing and implementation of Management Systems in Oil/ Gas Construction and Operations.

Corrosion Engineering consultant

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

To obtain a challenging, growth-oriented position with a reputable company that will utilize my current knowledge and skills while affording me an opportunity to developing new ones.

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Contract Negotiation, Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Private Business and Coordination of Marine Repair and Refurbishment projects.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

Executive leadership and acquisition of undervalued Assets, Companies or Reserves in the mid & upstream sectors. Energetic leader in Corp. Development, Problem Solving, E & P, Pipelines, Gas Processing and MMS; start-up to multi-billion $$ companies, providing multi-million $$ accretive results.

Dynamic, results-driven Finance and Operations Executive with superior background in large-scale national and international projects/programs.. Proficient at contract negotiation, project start-up/planning and oversight, personnel management, accounting, job costing, contracts and logistics

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

The majority of my experience has been in project Director/management/ engineering and all related to the oil and gas industry offshore and onshore

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

My objective is to utilize my 25 years of experience in the oil industry, as a Drilling Consultant, for a International Oil Company.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Looking for an appropriate position in an international company where I can utilize and further enhance my contracts administration/ project management skills with exposure of engineering, that I have acquired over 20 years of working in Oil Refinery/ Petrochemical Industry.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

Clerical Jobs

HEALTH, SAFETY & ENVIRONMENT OFFICER QUALIFICATIONS 14 years of Technical Writing Experience 14 years of Safety Training 19 years of Teaching Experience 19 years of Business Continuity Experience 22 years of Experience Using & Programming Computers.

I have over 35 years experience in the operations and Management of different chemical plant processes and some refinery processes.

I have more than 20 years experience, world wide, in QA, Safety, & Welding management in manufacturing & construction environments.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

PROFESSIONAL SUMMARY Over 20 years of proven expertise in direct oil and gas operations. An experienced trouble-shooter and problem solver.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Objective—Materials or Manufacturing management in an aggressive organization seeking to become best in their trade through intelligent use of systems and processes.

Extensive experience in the Gulf Coast and Gulf of Mexico in all phases of drilling, completion, remedial & production operations.

Internationally oriented. Experience in Oil & Gas, Mining, Engineering, Construction, Computer Manufacturing.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out