Resume - I have 10 years experience in instrumentation and control field. I have designed...

Misco Jobs

Resume #20322

CONTACT INFORMATION:
View contact information...

Instrumentation & Control Engineer Assistant / E. I technologist

SUMMARY OF QUALIFICATIONS
* 10 years experience in electrical & instrumentation control system field
* Designed, setup and commissioned Electrical & Instrumentation control systems
* Maintained and troubleshoot control systems
* Proven abilities to design control systems and to program PLC/DCSs
* Skilled in extensive range of sensors, controllers, transmitters, switches, control valves, interlock systems, motors, pneumatic, hydraulic equipment and other field devices
* Experienced in oil & gas chemical engineering and fine-chemical manufacture engineering
* Analyzed and solved problems under high pressure and tight deadlines
* Proven traits of responsibility, punctuality and honesty
* Demonstrated ability of self learning, logic thinking, analysis and strong problem-solving abilities

PROFESSIONAL EXPERIENCE
Distribute Control System (DCS) & PLC
* Installed, startup, setup, debugged DCS systems (Honeywell TDC3000 AMC, TOSHIBA TOSDIC243D, SUPCON JX300), HMIs, and PLC systems (OMRON CPM1, AB SLC500, SIMENS S-7)
* Programmed, configured DCS, HMI and PLC systems such as system configuration, control points configuration, loop simulation test, Logic control block programming, SOPL programming, sequential control programming and flowchart programming
* Developed and maintained DCS, PLC, HMI's software system reliability, integrity and software backup systems in the event of system failure (ESD emergency shutdown) and upgrading

Field Instrument Control System
* Skilled in different control facilities such as Rosemount, Foxboro, Barton's transmitters, Converters, Fisher control valves, E+H's sensors and flow meters
* Prepared installation details include electrical and pneumatic as well as plant instrument locations, conduit locations, size and installation notes
* Installed, startup, tested and calibrated field control systems such as temperature, flow, pressure, level control systems, packing weight systems, burners, motors, and compressors control systems
* Designed, installed, tested field device control systems and interlock protection systems such as Air compressors, Ammonia compressors, Burners, package and weight systems
* Programmed and configured VFD of motor control systems

System Maintenance
* Carried out daily and periodically maintenance of control systems such as calibrated zero and span of sensors, transmitters, I/P converters, controllers and control valves
* Replaced, wired, setup and tested defective components of PLCs, DCSs, controllers, VFDs and other control equipment
* Provided emergency repair on demand when off duty

Control System Design, Drawing and Diagrams
* Developed control system datasheets, drawn P&ID diagrams and typical loop control diagrams
* Prepared datasheets of field temperature, flow, pressure, level and other field device control systems
* Calculated orifices, control valve parameters
* Issued specifications of control systems
* Programmed flow accumulating systems
* Selected instruments such as sensors, transmitters, control valves, field controllers, analyzers, VFDs
* Designed wiring diagrams for wiring junction boxes, data communication and computer networks

Computer Hardware and Software
* Experienced in PC hardware, software and AutoCAD
* Good at VB/C/VC++/ASP
* Microsoft certified system developer and certified database administrator

Analysis/Design
* Analyzed field device's control demands and designed renovation control systems according to market requirements
* Designed Data Exchange System of Production management and marketing administration

Documentation
* Created technical documents, installation guides, operation and maintenance manuals, failure analysis reports

Organization
* Organized and prioritized multiple job requirements
* Identified tasks to be accomplished
* Motivated others on group projects
* Researched and evaluated renovation projects according to demands of process.

Supervisory and Administrative tasks
* Supervised 50 people in E & I department and took charge of the daily routines
* Reviewed and approved the technical documentation and operation manuals
* Liaised with contractors
* Trained new employees

Communication
* Worked in a team environment dealing with engineers, technicians and administrators

EDUCATION & TRAINING
* Licensed industrial electrician 2004
* AB PLC programming 2003
* OMRON C Series PLC certified programmer 2003
* MCSD/MCDBA 2000
* SUPCON JX-300 DCS Operation/Engineering Configuration 1998
* TOSHIBA TOSDIC243D's hardware & software operation and configuration 1995
* TDC3000 Basic system operation & configuration 1993
* TDC3000 DCS's hardware & software 1993
* Bachelor of Engineering (Process Control & Automation) 1990

WoRK EXPERIENCE
* Co-op student Duffin_Peel Adult School (Canada) 2005-Present
* Field sales Easy-Link Inc. (Canada) 2003-2004
* Technician Dave & Buster's (Canada) 2002-2003
* E.I Technologist/Engineer/Manager Sichuan LUTIANHUA Group (China) 1990-2001

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9501 to 9550 of 10923)

Go to Search Parameters...

Brief Description

laboratory, mechanical, electrical, computer, supervisory and leadership skils

13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I am aged 27years and diploma holder in fire fighting Engineering, and have 2years experience in safty feild

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

PVT ANALYST 2 years experience .. I am a highly motivated individual seeking a position in the oil and gas industry. My leadership capabilities and my willingness to learn and adapt to new jobs will make me a valuable asset to your company .

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Civil engineer, Project Manager, contract Manager

Expertise in SIEMENS PLC & SCADA, B.E. (Electronics) from University of Pune

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Safety CSSS/CSST NCCER #3403930

Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.

I am having industrial sales experience of around 8 years in Hydraulics & filtration system & its component sales.

Highly skilled engineering and construction management professional.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

MSc environmental sciences with a strong focus on air pollution and health risk assessment

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Good interpersonal and communication skills, Counseling and persuasive ability,Good quality report writing and typing speed, Public speaking and presentation capacity, Proficient use of spreadsheet software and Microsoft Office suite such as MS-Word, MS-Power point, MS-Access and MS-Excel,

Electronics and communication Engineer

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

Installation and commissioning, project management

16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health

Comprehensive problem solving ability, excellent verbal and written communication skills, willing to learn and team facilitator

Of particular note for you and the members of your team as you consider the placement of a position are my strong accomplishments in my ability to operate a forklift while loading or unloading freight, production and/or shipping experience and completing orders and supplier subcontract parts.

Respected Sir, I have come to know through some of my close sources about the post of a rig worker Under your kind control & I am applying for the same by forwarding my curriculum vitae. I am requesting you to please give me a chance.

i had just completed my B.Tech in electronics and instrumentation engineering from IET bhaddal punjab state india. My six months industrial training was on PLC Programming and working, installation and troubleshooting of field sensors interfaced with PLC's OR PC's.

Experienced & Seasoned Engineer

General Accountant/Financial Reporting

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

More than 10 years of rich, in-depth, varied experiences in the field of Project Quality Assurance / Quality Control, Project coordination, execution, Testing and Pre-commissioning of diverse E & I and CP system activities in Refineries, Oil & Gas Plant (Onshore & Offshore), Fertilizers Plant, etc.

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

Honest, proactive, innovative, safe, persuasive

Contracts Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

MSc Petroleum Engineer

A hard working and dedicated recent graduate with proven organizational skills and practical experience in geological field work. Effective leadership skills and a cooperative team player with the willingness to learn. Can be relied on to get the job done. Seeking a geologist position.

Intend to build a career with leading corporate with committed & dedicated people, which will help me to explore myself fully and realize my potential. To be a part of dedicated, goal-oriented problem solving team.

Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries

water and waste water power plant, steam, laboratory, analysis chemical chemist

Unloading trailers, Recieving, shipping of product, conduct daily activity of 12 employees in a warehouse, some knowledge of mechanical and electrical systems, some knowledge of computer systems, capable forklift operater, class b license.

Human Resources/Recruitment Internal & External/Projects - Systems Coordinator Overseeing of Project Managers & Their Teams Aust & Oversees/Mining & Gas Industry/Management/OHS Rotational shifts/FIFO/Shift Work. I have just returned from Nauru where my partner was the Operations Manager in the Mines

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 [ 191 ] 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out