Resume - 15 years of progressive experience and responsibility with documented success in...

Misco Jobs

Resume #2036

CONTACT INFORMATION:
View contact information...

PROFILE:

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels.
I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

EXPERIENCE:

    Arabian Gulf Oil Company    Benghazi, Libya
    Drilling Supervisor    1997 to 2001
Scope: Supervised drilling operations, workover and completion of development, exploration, deep, shallow, vertical and horizontal oil wells. Worked as a company man and drilling Superintendent.
•    Worked as a Field drilling Supervisor (Head of Field Drilling Department) to run 4 drilling & workover rigs- consulted on operations, requirements, administration and trouble-shooting.
•    Applied engineering / operational practice to successfully implement drilling & workover programs.
•    Successful supervision of a project for drilling and completion of 10 horizontal wells along with implementing Coiled Tubing technology to kick-off natural production
•    Assisted subordinates and supervisors in identifying and resolving problems.
•    Provide technical consultation during drilling operations to resolve problems such as bore directional change, unsatisfactory drilling rate, mud engineering, system and materials.
•    Advised substitution of drilling mud compounds and tool bits to improve drilling conditions.
•    Implement the use of computerized forms for daily drilling reports and other technical forms.
•    Executed and followed up daily operations of drilling and workover rigs.
•    Serve as a company representative to liaison with contractors.
•    Respond to written and telephone calls of superiors and contractors.
•    Identified problems, diagnosed causes and determined corrective actions.
•    Learn all aspects of the job and the social environment.
•    Maintained inventory of drilling and mud materials on well site and in warehouse.

    North Oil Company    Kirkuk, Iraq
    Chief Engineer    1995 to 1996
Scope: Assistant of Field Division Manager for the upstream technical and administrative activities.
•    Organize the activities of Drilling, Geology, R & D and Reservoir Engineering departments.
•    Unified plans, programs and requirements of the above departments for short and long terms.
•    Follow up of daily operations, technical and administrative.
•    Answered questioner and requirement of higher authorities for specific needs and plans.
•    Attended daily meetings of the Heads of the said departments with the Field Division Manager.
•    Created and Published H2S Safety Manual as a general guide for the company employees
•    Expedited communication between upper level management and general personnel.
•    Contributed to all aspects of technical and administration requirements of the company.

    Senior Drilling Engineer    1991 to 1994
Scope: Worked as Drilling Operations Manager.
•    Followed up and supervised drilling operations throughout Mid-North Iraq.
•    Co-coordinated with drilling contractors the execution of drilling contracts.
•    Negotiated terms of drilling contracts and contractor's agreements.
•    Supplied drilling materials to well site locations with out any delays.
•    Revised drilling programs, well designs and trouble-shooting of well problems.
•    Helped oversee all aspects of drilling operations & engineering for the head of drilling department.
•    Maintained close personal contact with drilling supervisors, other operational units & departments.
•    Demonstrated effective personal communication skills at all levels of work and management.

    Unit Mud Engineer    1988 to 1990
Scope: Supervised and controlled mud engineering and operations for 17 drilling rigs.
•    Follow up of daily mud engineering & operations all over Mid-North Iraq area.
•    Supplied and advised the use of mud materials for different kinds of drilling fluids.
•    Designed drilling fluids programs as an integral part of the drilling program.
•    Standardized, specified and approved drilling fluids materials: specifications & purchase approval.
•    Applied & implemented the use of national mud materials instead of imports: as a part of team helped in specifications, field tests & approval to use national Bentonite & Calcium Carbonate.
•    Changed mud system in many oil fields to eliminate hole problems and reduce drilling time & cost.

    Drilling Engineer    1983 to 1987
Scope: Worked as a Drilling Supervisor (Company Representative) and Mud Engineer.
•    Worked as Company Man to Supervise & follow up the daily drilling operations & requirements, on wellsite, of drilling contractors on development and exploration oil and gas wells.
•    Supervised contractors: Saipem, Bulgargeomine, Stroje Export, RomePetrol and ADWOC.
•    Controlled drilling fluids operations, worked as a Mud Engineer on wellsite.

EDUCATION:

    University of Southern California    Los Angeles, California
    M. Sc. in Petroleum Engineering

    University of Baghdad    Baghdad, Iraq
    B. Sc. in Petroleum & Minerals Engineering

PROFESSIONAL DEVELOPMENT:

    IWCF, PITS, Nisku, Aug. 2002
    H2S Alive, PITS, Calgary, Jun. 2001
    WHMIS, PITS, Calgary, Jun. 2001
    TDG, PITS, Calgary, Jun. 2001
    1st Aid Emergency, St. John’s Ambulance, Jun. 2001
     MS Office computer course, Calgary Immigrant Educational Society, Nov. 2001
     Computer Skills: Proficient in Microsoft Word & Excel, familiar with Power Point & Access.

VOLUNTEER WORK:

    Computer / Office Assistant with Supply Chain Management, Shell Canada Ltd., Dec. 3-14, 2001.

AFFILIATIONS:

    APEGGA - Membership in progress
    Practitioner, Iraqi Union of Engineers

LANGUAGES:

    English (Fluent)
    Arabic (Mother Tongue)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 9785)

Go to Search Parameters...

Brief Description

I am urgently looking for a job on an Oil or Gas rig. I have a high school and Waste Management diploma. I also have 23 years of experience in managemet. I am willing to learn new skills

Production and exploration test ranging from high volume critical sour wells incorporate multiple separators, line heaters, circulating and transfer pumps, to sweet shallow gas testing. Experienced in well testing with high content of H2S, CO2. Experienced in HP/LP separators, pumps and oil producti

Effective communication, team building, annovative

Electrical Technician, Ross Hill and IPS SCR drives, Varco Top- Drives

Mechanical Supervisor(Power Plant). Have work experience in Pakistan Navy also.

Shift supervisor in LNG plant, commisionning engineer; productio manager, project maager

Having 11 years of rich experience in Project coordination and Procurement of Oil and Gas EPC projects.

Over 11 years Elec & Instrument &Control Engineering and Detail Design in Downstream Oil&Gas,Petrochem, Energy. Field Instrument Specs, Construction Dwgs, Site Supervision, FAT of Control Systems, Supervisory Role.

I am a Senior Structural Engineer with detailed design, field engineering, fabrication supervision and hook-up experience in the offshore oil and gas industry. I have gained a solid technical background and practical outlook by working on site in the oil and gas industry.

The solid luggage of my experience and my expertise in the exploitation and trainee, having formed with the most powerful methods and having applied them successfully, I am seeking a position to contribute for the progress of a leading multinational organization. I am presently in the retirement and

Expert in Well Stimulation (Hydraulic Fracturing, Acidizing) and Sand Control and highly experienced in sand face completion, production optimisation and FDP

I have done three years course in CHEMICAL(Plant Operation),NCVT, From Bhandara (Maharashtra) and having over 21 years of experience( Three years gulf expereance) of PreCommissioning/Commissioning of Petrochemical Gas(gasco, buhasa) And Chemical plants.

Laborer

I have 26 years Welding experience, including 3 years Fabrication, Welding and Maintenance on Oil & Gas Drilling Rigs, associated equipment and infrastructure. I am currently employed as a Welder for Drilling Contractors on an onshore Oil & Gas Rig at Fairview Gas Field with a 2 on 2 off roster. My

Training Coordinator, over (16) years of experience in petrochemical plant operations, and over (2.5) years of experience in the field of training.

HSE technician, Safety officer, HSE Advisor

Piping Designer PDS administra

Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.

Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.

Operations Manager - 18-yrs experience - Russia, China, SE Asia, Europe & US. Background in drilling, production & well servicing. Experienced with G&G & reservoir. Extensive experience in tendering & contract negotiation. Line management responsibility of budgets of >$250M.

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Currently i work as offshore field service technician provides the service for the application of High Density Polyurethane Foam (HDPUF)

An outstanding background of more than 18 years of working in oil and gas industry with Saudi Aramco with proven hands-on extensive experience in oil and gas fields, operational and maintenance on-field, control room and site office.

A Mechanical Engg gradute having over two decades of experience of whole gambit of SCM including Global contracts & procurement , e-procurement, Negotiation,Dispute Resolution & Conflict Manament, Warehousing , SRM, etc in a very large MNC , Public sector oil & gas E&P( down steam/upstream)

Petroleum Engineer

9 yr experience in Design,development,implementation & Delivery of SCADA Projects

More 15 years experience in Blasting/Painting Inspector and Supervisor both offshore and onshore work in oil and gas/Plant and FPSO project.Familliar with the all painting specification and colour code

6 years overall experiance in oil & Gas / Petrochemical Industries

A Chemical Engineer (B. Sc., M.Sc.)

I have 9 yrs experience as a Planning Engineer in Oil and Gas sector, please let me know if any suitable vacance available for my knowledge and Experience.

Now i'm working in Qatar as a store keeper, i have more than 6 years experience in this field , i'm working in oil field project

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

Expand on my knowledge, skills and abilities to grow both personally and professionally making genuine impact in the organization. I like to be part of a geological, geophysical and petroleum engineering team that uses all disciplines to meet their goals.

I am a chemical engineer having over 18 years experience (8 years in Petroleum Development Oman – a Shell Group Operating Company) in the Exploration & Production petroleum industry covering onshore as well as offshore locations, particularly in Well Services operations in Oman and India.

A talented multi-lingual business professional with more than 10 years expertise in domestic/international business, market, and product development increasing market share by 30% and sales by 20%

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

6 years experience in the field of Mechanical, Piping Engineering Design / Drafting. A variety of successful projects for oil & gas, chemical and cement plants. Design, Drafting, CADD, and checking experience that includes supervision, conceptual layout, piping design, pipe supports, fabrication dra

Instrument and metering technician

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out