Resume - Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Misco Jobs

Resume #2138

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

DATE OF BIRTH :         4 July 1959
NATIONALITY :          INDIAN (Permanent Resident Status in the UK and Alien card for Japan)
QUALIFICATIONS :         B.Sc. B.E. (Instrumentation & Control). PROF. EXPERIENCE : 20 YEARS
DETAILS OF PROF.EXPERIENCE :

2001- present : Toyo Engineering Corporation , Chiba , Japan : Working on BASF China's OXO project. Responsible for In Tools set up for Instrument Index, Process data & Loop wiring modules. Prior to that worked on Russian Polysterene Project and Russian Refinery expansion - Hydrocracker (UOP Process) & Visbreaker units (FW/UOP Process). Responsibilities included bid evaluation and order placement for high value items.

1996 - 2001 : Larsen & Toubro Ltd., Mumbai,INDIA, Senior Manager Instrumentation
Responsible for Project management including engineering, procurement and execution of Electrical & Instrumentation in Oil and Gas Group for various lump sum turnkey projects and proposals for ONGC & IOCL. Instrumentation scope included DCS/PLC, F&G and CP systems, control/relief valves, turbine meters and orifice assemblies. Worked on HRC Process platform which was commissioned and handed over to ONGC six months ahead of schedule. Main achievements included cost savings of 200,000 US$ in DCS/PLC & F&G systems. Developed pipeline custody transfer system for crude oil flow measurement by replacing Barton turbine meter internals with shrouded rotors (rim type) for better accuracy and maintenance. Redesigned main oil discharge system to cover wide variation in trunk line pressure by developing a control scheme consisting of discharge pressure measurement and reduced trim for control valve. Last two activities were done post commissioning. Independently handled Instrumentation modernization jobs for topside modifications for ONGC (PPM & CRMP-II projects) involving 25 wellhead platforms in Bombay High offshore field.

1991 - 1996 : Foster Wheeler Energy Ltd. READING, UNITED KINGDOM.              Senior Control & Instrumentation Engineer.

1994 -1996 : Worked on a grassroots aromatics project for Singapore Aromatics Company. Responsible for design and detailed engineering of Emergency Shutdown Systems using TRICONEX TMR PLCs. Main achievements included development of system philosophy, preparation of specifications and requisitions, bid analysis, preparation of cause & effects and functional logic diagrams for compressors, fired heaters, boilers etc. Prepared a turnkey Proposal (jointly with CHIYODA) for OMAN LNG project for Shell.

1993 - 1994 :     Worked on FCCU Unit of ESSO Standard Thailand's Sriracha Refinery, Thailand. Responsible for detailed engineering including development of PIDs, compilation of Control & Instrument Database, definition of control system philosophy, sizing & selection of control valves, safety relief valves, orifice assemblies, procurement of instrumentation and control systems using computerised requisitioning.

1991 - 1992 : Worked on Coryton Isomerisation project for Mobil Oil Company Ltd. UK.
Responsible for engineering & procurement of all field instrumentation in general and control valves, relief valves, meter runs, thermowells, vortex meters, flow & temp. transmitters in particular, for modular fabrication. Participated in factory acceptance test for Foxboro's IA DCS. Contributed towards the ahead of schedule and within budget project completion resulting in management appreciation from both Foster Wheeler and MOBIL.

1990 - 1991 :     H & G Engineering. Glasgow, UK. Senior Instrumentation Engineer.

Worked as a Lead instrumentation engineer for a front end package of ELCD plant for NORIT (UK) Ltd, and revamping of 40,000 tpa ABS plant for GE Plastics in Scotland, UK.

1985 - 1990 : Humphereys & Glasgow Engineering Ltd. Bombay , INDIA.

1988 - 1990 :     Lead Instrumentation Engineer
    Led a team of 12 C & I engineers and designers responsible for detailed engineering of 2x80000 tpa LLDPE/HDPE project for Indian Petrochemicals Corporation Ltd. Prepared project standard procedures. Responsible for deployment of manpower, supervision of the task force, project control and reporting. Managed procurement of instrumentation & control systems and system engineering of Honeywell TDC 2000 DCS.TECHNIP France were the turnkey contractors. Successful and timely completion of this prestigious project was rewarded by a promotion to Senior engineer position and deputation to Glasgow (Scotland office) in the United Kingdom .

1985 - 1988 :     Instrumentation Engineer
    Worked with a senior engineer on Hydrogen Peroxide project for Thai Peroxide Ltd. Main activities included preparation of cost & manpower estimates, system engineering & inspection of Yokogawa's CENTUM DCS. Prior to that worked on various projects like Gujarath Heavy Chemical's soda ash plant, Modi Cement's 1 mtpa cement plant, Century Enca's polyester plant. Preparation & checking of instrument loop diagrams, layouts & cable schedules, hook up drawings & MTOs using CAD & MICROS, system engineering for Allen Bradley PLC-2, Instrument testing and inspection, Instrument installation, calibration and pre-commissioning.

1982 - 1985 : Engineers India Ltd New Delhi, INDIA.
    Assistant Instrument Engineer
    Participated in oil & gas exploration activities (both onshore & offshore) after successful completion of 1 years Management Training Program for Graduate Engineer Trainees.

PROFESSIONAL TRAINING:

2001 : Larsen & Toubro Management Center - 1 week Interactive course in Management practices.
1995 : HONEYWELL SMS FSCAD - Functional logic diagrams development - 2 days.
1989 : Allen Bradley PLC-2 BASIC AND PLC-2 ADVANCED - 2 WEEKS.

DETAILS OF ACADEMIC QUALIFICATIONS :

1979 - 1982 : Bachelor of Engineering - Instrumentation & Control - College of Engineering PUNE. Passed with distinction - 78 % of marks and 1st rank in University of Poona, INDIA.

1975 - 1979 : Bachelor of Science - (First Graduation degree) SUB : Mathematics, Physics, Chemistry. Passed with distinction - 86% of marks and 1st rank in District at final examination.

1965 - 1975 : Secondary School Certificate - (High School) SUB : English, Mathematics, Sciences. Passed with distinction - 84% of marks and 32nd rank among approx.100,000 students.

ADITIONAL INFORMATION:

SENIOR MEMBER OF INSTRUMENT SOCIETY OF AMERICA (ISA International/England section). Computer literate, fluent in 2 Indian languages (in addition to English), excellent health, positive attitude.
Married (no children as yet), believe in plural experience & wider perception to broaden career horizons.

CAREER OBJECTIVES :

1)To effectively employ the technical and managerial skills acquired in the last twenty years of working experience in the EPC (Engineering, Procurement and Construction) environment in Europe and Asia.

2)To widen the career horizons by enhancing the professional experience of working in India, UK and Japan by adding the experience of working in Europe / USA / Far East in order to become a true global technocrat.

3)To contribute towards making our planet a better living place for future generations by applying innovative and environment friendly business practices in most cost effective and energy efficient manners.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 10902)

Go to Search Parameters...

Brief Description

Oil and gas phd in geology

Qualified and experience AutoCAD Designer familiar with the technical language of the oil and gas industries Civil & Structural drawings using AutoCAD, Isometrics, Process and Instrumentation drawings. Experienced with one of Shell’s major projects in the Niger Delta (Forcados Yokri Integrated Pro.

Working with Geophysical Data Acquisition Group and have more than six years of insightful experience in the field of 2D/3D offshore & onshore seismic data acquisition in Indian and International exploration acreages.

Since 2004 I have been employed at Frontken (S) Pte Ltd in various Inspection and Supervisory positions in the field of protective coatings – including powder coating, painting and thermal spray coating. I have hands-on experience in thermal spray coating and painting application.

Five plus years of process engineering experience in the field of refinery and petrochemical with esteemed organizations in India and world.

I have worked as Process gas anlalyzer come inst.tech. currently working as H2S safety consulyant.

Security specialist

Drilling Systems Offshore Instrumentation Engineer with 12 years experience

(IRCA, UK Certified Lead Auditor QMS ISO 9001:2008)

Diploma in Civil Engineering Studied

Seeking as an Engineer – Instrumentation in Automation, Design & Detailed engineering activities serving core industries that can utilize my skills and provides potential to enhance my knowledge and to attain goal of company.

Experienced Buyer

Graduate Civil Engineer and Structural Engineering M.Sc., 6 years experienced in Offshore structures. Experience in jackets (FEED and Detail) and Semi-submersible (FEED and Detail) projects. Easy learning and excellent skills in softwares such as SACS, ANSYS, ABAQUS, GT Strudl, Solid Works, Patran,

INTERNATIONAL MARKETING ( FIRED HEATER/BOILER/WASTE HEAT BOILERS/SOLAR STEAM GENERATOR )+6YRS EXP+ME IN MECH DESIGN

College Study with 13 years oil & gas Logistics Experience

Six years in a medical lab an nine years in a petrochemical lab

Piping

Certified Lead Auditor in ISO9001 and coversant with 14001, Trainer of ISO QMS, Plastic Technologist and expert in Quality Control of entire production, In-charge of resolving customer complaints and overall expertise in devoloping new furniture and engineering plastic products

MSc( Material Sciences & Technology),Certified Welding inspector-(AWS ¡V CWI) Certificate No. 05102011, CSWIP 3.1 Certificate No.26154. SAUDI ARAMCO (WELDING & MATERIAL INSPECTOR) APPROVAL No. SAP # 70004856, Well versed with international standards and ASME, API, AWS, ASNT and ARAMCO Standards.

I am Chemical engineer backed by MBA with 15 years of proven track record in the field of marketing & sales of specialty chemicals to wide range of industries. I have worked for & trained with some of the largest multinational chemical companies.

Piping design and supervision experience, across a number of fields

2D and 3D seismic experience, QC- and seismic field engineer, basic knowdledges of process (Promax), strong Knowledges of sismic design (Mesa), Data base managment (office tools)

Qualified Diesel Mechanic

Chemical Engineer, Project Manager, Process Operator in oil and gas

I am specialized in Process Analysers and Analyser System House house servicing and commisioning.Having More than 9 Year Experience .

I have a broad range of experience in both technical operations as well as management. Currently I am a Well Test Supervisor but I would like to look for position as a Well Services Engineer or Completion Supervisor. It is my career decision to be a specialist in all well services and completion.

Drilling Engineer

I have a total of 19 years in the oilfield industry, I have been a pusher fo 2 1/2 years and a driller for 9 years.

I am an Independent Landman looking for employment in the Oil & Gas Industry. I have approximately 10 years experience in Mineral Title Search and negotiating leases, Due Diligence and Curative of Title among other aspects of this business.

E&P Hydrography , GIS, Geoinfo Mgmt,Land Surveying, GPS, Coordinates Ref Sys, Survey QC Rep,Construction Surveying,Geomatics Records Mgmt, ASSAI – EP Catalogue

Now i present work with odebrecht company as QA/QC MANAGER

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

20 years oilfield experience. Day and Night Drilling Supervisor, Rig manager, OIM. Sub sea, Surface and land drilling knowledge. Proven safety record, Operations & man management skills. I have good background in drilling, work-overs and completions, Surface & Subsea.

I have oilwell service experience with wireline, swabb have ing, fishing and rental tools. I24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

Construction, Pre Commissioning, Commissioning E & I Project and Project Management

Fifteen years of shipyard experience (technical and management), overall twenty-one years of mechanical design and project management in large industrial sites.

Operational, process, construciton, commissioning jobs

More than 25 years experience in electrical field and overseas on-shore,off-shore oil/gas projects in construction,commissioning,preservation,maintenance,training/very good communication skills:English-Russian fluent,French-Italian good level.

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Over 20 years experience in the Health, Safety and Environment Field in supervision, training, auditing and implementation of Management Systems in Oil/ Gas Construction and Operations.

Corrosion Engineering consultant

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

To obtain a challenging, growth-oriented position with a reputable company that will utilize my current knowledge and skills while affording me an opportunity to developing new ones.

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out