Resume - Engineering Degree and having experiances on several industries (Manufacture, Pe...

Misco Jobs

Resume #21448

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
- Workshop Fabrication Leader / Construction Dept.
- Vibration Technician / Technical & Reliability Dept
- Mechanical Specialist / Maintenance Offshore Field

OBJECTIVE:
My expectation is to work in reputable company with good salary and consider employee as assets not just workers.

WORK EXPERIENCE:
QATAR PETROLEUM (November 2003 until NOW)
Oil & Gas Company own by Qatar Government.
Position: Mechanical Specialist / Maintenance Offshore Field
Job & Responsibility:
* Develop and improve Preventive Maintenance Schedule for WHJ's
* Implement Preventive Maintenance for Life Boat (Mulder & Ridjke) and WHJ's equipment for Static and Rotating.
* Handle Corrective and Preventive Maintenance on Terminal Operation
* Vibration check for rotating equipment on Terminal Operation
Kind of Equipment:
* Static facility such as: piping, valve, vessel and exchanger
* Rotating equipment such as: centrifugal pump, gas turbine (TB 5000 and Tempest)

PT. AMOCO Mitsui PTA Indonesia (May 1997 Until December 2003)
Chemical Company, which produce more than 350,000 Ton/year Purified Ter phthalic Acid (PTA).
Position: Vibration Technician / Technical & Reliability Dept.
Job & Responsibility:
* Develop and improve vibration schedule
* Implement Predictive Maintenance Vibration & Oil Analysis (CSI Tools)
* Analyze vibration data
* Inspect coupling condition using Strobolight
* Issue weekly report for Maintenance Dept.
* Report to Vibration Engineer
* Develop and improve equipment historical record
Equipment under Inspect (Rotating Equipment):
* EKATO Agitator type HWL
* Pressure Centrifuge type P-6100
* Rotary Valve
* Vacuum Pump
* Sandyne Pump type: LMV-331; HMP-3000; & P-2000
* General Centrifugal Pump (Ebara, Durco, etc)
* Rotary Dryer
* Omega Coupling using Strobolight
* Compressor System using online monitoring (Bentley Nevada)

PT. SIEMENS Indonesia (October 1996 Until May 1997)
Manufacture and Construction Company, manufacture and Install power plant equipment such as turbine and it cooler.
Position: Workshop Fabrication Leader / Construction Dept.
Job & Responsibility:
* Trouble shooting and overhauling static equipment
* Co-ordinate Maintenance contractors
* Weld ferrous and non ferrous material
* Handle Workshop Job (machining and pipe fabrication)
* Repair on site static equipment
* Developed and improve Job Safety Analysis
* Inventory consumable material
* Report to Workshop Foreman
Kind Of Equipment (Static Equipment):
* Pressure Vessel Repair
* Piping repair and fabrication (ferrous and nonferrous material)
* Support fabrication (pipe, construction etc)

EDUCATION & CERTIFICATION:
Education
1. Diploma: Vocational Training Center SIEMENS Indonesia
Majoring: Mechanical
Specialization: Universal Welding
2. Engineering Degree: Tirtayasa Banten University
Faculty: Engineering
Majoring: Industrial Engineering
Theses: "Model of Vibration Measurements Scheduling for Cost Minimizing Because of Breakdown"
(Site: Petrochemical Plant)
Training
1.Date Participant: 24 until 30th Sept 1998
Focus: AutoCAD R.13
Organizer: LIT Untirta
2.Date Participant: 27~28th July 1999
Focus: Practical Modern Safety Management & JSA Course
Organizer: PT.AMI & PT. Patria Utama Humanindo
3.Date Participant: 30~1st Oct 1999
Focus: Piping Design, Maintenance & Inspection
Organizer: PT.AMI & PT. IRRIDIA
4.Date Participant: 17~19th Apr 2000
Focus: Failure Analysis
Organizer: LAPI ITB
5.Date Participant: 18~22 June 2001
Focus: Machinery Vibration And Analysis Basic
Organizer: Yayasan Puncak Sari
6.Date Participant: 24~28 June 2002
Focus: Machinery Vibration And Analysis Advance
Organizer: Lab Dinamika ITB
7.Date Participant: 21~22 January 2004
Focus: H.U.E.T & Sea Survival
Organizer: Venture Gulf Training Centre
8.Date Participant: 20~21 February 2005
Focus: SAP end user PM Notification and Order
Organizer: QP Training Centre

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5551 to 5600 of 9785)

Go to Search Parameters...

Brief Description

Recent graduate with an MSc degree in Oil and Gas Engineering and looking for a role where I could use the engineering knowledge and academic skills that I have gained from my MSc degree, and develop a long term drilling and well engineering career.

filing, answering telephone, replying e-mails, making an input and output letters, weekly and monthly report, booking a hotel and travel reservation, preparing for expatriate’s visa and passport also the flight schedule, and checking for crew change.

B.Tech from IITK, 4 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I have been working at Total E&P Indonesie as a Well Service Supervisor since 1998 until March 2006 (supervise slickline, well testing and maintenance, electricline (perforation and logging), snubbing unit and coil tubing unit) and as a Contract Workover Barge supervisor (with workover RIG) at CNOOC

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

8 years of international experience mainly in the oil field. Field Service Manager/General Field Engineer/IT Project Manager for Schlumberger worldwide/SCADA Business Developer Manager/Project Manager and SCADA Protocol developer for South America.

I have been working international as a contract wellsite supervisor, My area of expertise is in completions, abandonment and workover. I have worked on wells to 3500m in depth, sour from 1%-3% for about 1/2 my career.

KEYWORDS Mechanical, Electromechanical, Power , Control , sheet metal, Acoustics , ISO 9001, CAE , CAD, CAM, Manufacturing, Production, Maintenance .

Experience with successfully managing all aspects of a large drilling center including implementing manual and automated drilling systems; selecting, managing and training staff.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Seeking position that would help develop myself in the management field in the Petroleum Industry

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Hands on experience in the dynamics of the offshore oil drilling industry. Proven, reliable and committed to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

To establish wider horizons in the automation of business with the inherited knowledge in the respective field.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

An International Quality Assurance & Safety Manager with a proven track record for ISO 9001 implementation, maintenance and development within the Oilfield Engineering and Manufacturing Industries.An experienced Lead Auditor of Management Systems, Engineering Projects and Suppliers

PDS, Microstation, AutoCAD 2D/3D Piping Designer

B.Tech(Chemical Engineerin),Highly proficiency in english and management and Technical skills

Naval Architecture

B.E.& DIPLOMA IN MECHANICAL,EXPERIENCE IN CADCAM DESIGN,SHOP FLOOR MANAGEMENT,MAN MACHINE MANAGEMENT,ERP ENDUSER,INTERNAL AUDITOR ISO 9000,ISO 14000,ISO 18000,VENDOR DEVELOPEMENT

BE - ELECTRONICS & TELECOMMUNICATION , Fresher From MUMBAI UNIVERSITY

Prepare material requirement list for job pack, Check and monitor the shipping schedule for material delivery on site, Received, inspect stores and inventories all material received for stacking in accordance with established material system procedures, directive and methods, Insure incoming materia

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

Instrument, Electronic and Process Technician with exceptional people skills and ability to adapt & learn.

Analyzer Technician

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Dear Sir/Madam,

SEEKING A POST IN ESTEEMED COMPANY

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

CAN DO ALL TYPES OF MAINTAINENCE OF INSTRUMENTS,THEIR CALIBRATION,ZEROING,ERROR DETECTION ETC.

B.Eng in Metallurgical Engineering

Having 6months experience as instrument technician completing BE

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

My main features respecting my work are hard working, honest and keen to progress

Chemist/Lab technician

• Diploma with a total of 7 years experience in Construction & Maintenance of Plant Instrumentation systems from planning and scheduling to execution of the job.

I have 7 years experienc in oil &gas &power plant industry,my experienc is about piping engineer,i am experienced to work with pds software .i worked with 3 forign country(LINDE/TECHNIP/DOOSAN).

HSE Safety

Offshore Platform Superintendent, OIM certified. Manage combined operations. Core skill - Electrical and Instrumentation.

10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator

I'm a young and fresh graduate of geology from a reputable University in Nigeria Who loves to work in a challenging work environment where standards are high.

First Prev 101 102 103 104 105 106 107 108 109 110 111 [ 112 ] 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out