Resume - Mechanical Senior Engineer (Rotating Equipment)

Misco Jobs

Resume #21541

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
To obtain a mechanical maintenance supervisor position at an Oil & Gas leading company.

EDUCATION
Bachelor of Science, Mechanics, 1994
Suez Canal University.

COMPUTER SKILLS: Very Good (Windows system, Word, Excel, Power Point).

LANGUAGES:
Arabic is the mother tongue
English Very good

EMPLOYMENT HISTORY
* Since 1/6/96 Up to 1/12/1998 working in Miser Golf oil processing Company "MIGOP" as Maintenance mech. Engineer with experience in reciprocating and centrifugal pumps, air compressors, High Pressure steam boiler and central air condition.

* Since 1 / 12 / 98 till now working as a Mech. Senior Engineer (Maintenance) in Salam Gas Plants Of Khalda Petroleum Company (The plant at Salam is capable of Processing 200 MMscfd of sales gas and 13,700 bpd of condensate).

SUMMERY OF EXPERIENCES
"7 years experience in the field of oil & gas industry"

A) Participate in punch list preparation During pre-commissioning, commissioning and start-up of The gas plant.
B) Preventive Maintenance, Trouble Shooting and Overhauling of the following: -
* Centrifugal Gas Compressors (GHH BOR‎SIG).
* Turbo-expander "GE-Rotoflow".
* Reciprocating Gas compressors (Mitsui).
* Gas turbine "MARS – 100".
* Gas Engine "Waukesha" & diesel engine "CAT".
* Multi stage surface pumps "IDP".
* Centrifugal and reciprocating pumps "IDP".
* Air compressors oil-free "Atlas Copco".
* Fire Fighting System (Pumps and Foam system).
* Water and sewage treatment unit.
* Air-cooled heat exchangers
C) Develops Predictive Maintenance Program for Rotating Mechanical Equipment.

TRAINING COURSES
1. Gas plant operation by TPL Co.
2. Detailed maintenance of Gas plant by TPL Co.
3. HSE course in Khalda petroleum Co.
4. Vibration course in Suez Oil Processing Co.
5. Gas Turbines MARS 100 "Operation & Maintenance" Course.
6. English language course " Advanced phase" in El-Manar Center Of Miser Petroleum Company.
7. Gas turbine design, performance, maintenance and health monitoring Course training at "TVU" academy middle east " Abu-Dhabi".
8. "Practical Machinery vibration" Course at RITEC Co.

CURRENT JOB TITLE
Mechanical Senior Engineer (Rotating Equipment)

Responsibilities
Now working as a Mechanical Senior Engineer (Rotating Equipment)
Responsible for the following:
a) Issuing all technical reports.
b) Working in the spare parts preparation and its optimum stock level.
c) Preparing PM tasks (data input) to be as manufacture documents for Maximo system.
d) Supervision & carrying out all preventive and corrective maintenance tasks (Maximo system).
e) Commissioning, Start Up, Maintenance and Trouble shooting for all Turbo Machineries, Reciprocating compressors (Mitsui) and Air Compressors (Atlas-Copco).
f) Preparing the plant shut down plan and supervise all mechanical tasks.
g) Follow up condition monitoring program for Rotating Mechanical Equipment.
h) Carrying out major overhaul of the following: -
1- Reciprocating compressors "Mitsui" and arrange all tasks and clearance measurements.
2- Centrifugal compressors "Borsig" (internally inspection of Impellers, Rotor, labyrinth seal and installing new bearing).
3- Turbo-expander "GE-Rotoflow" (dismantle and re-assembly) and measured all clearance.
4- Air compressors oil free (ZT-200/137) "Atlas-Copco" and replacement for elements.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 10917)

Go to Search Parameters...

Brief Description

Rotational Power Infrastructure Manager & International Quality and Safety Systems Management

Computer ?Automation & Controls Engineer

Welding Engineer, Welding Inspector CSWIP, Mechanical Engineer

corrosion failure analysis and corrosion protection

i am working as utility technician in petrolium refainary and i know very well electrical fault&problem i am know ms word/exell and data update

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

Mechanical Senior Engineer (Rotating Equipment)

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

Manager of gas contracts totalling 10M therms/day and deliveries to 1875MW Teessie Power Station

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

10+years Instrumentation/Electrical/Control system experience, Canadian Journeyman Instrument Mechanic Certificate, Electrician ticket: Certified Engineering Technologist

Petroleum Engineer Oilfield experience 2 years Electricity Diploma.

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP, Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Landman. Experience in mostly the Rocky Mountain States. Lease Acquisition, Title Research, and Right-of-way.

Seakes International employment in the oil/gas industry, in areas of completions(perforating ), Production engineering. Has 9 yrs working experience as a perforating Engineer with Halliburton energy services in Nigeria.

Honours / Master of Science Graduate in Chemistry with extensive laboratory and moderate industrial experience. Interested in chemical research and development as well as industrial experience.

Continuously enhancing my expertise in manufacturing and my education on engineering management area by consistently contributing to the company.

JOb requires for B.E. ( Fire ) and DIS safety Engineers. Experience : 12 years in Petrochemicals Industries.

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Degree in Chemical Engineering from a prestigious university. About 9 years of Experience in teaching and training related to oil sector. Train – the - Trainer certificate from the employer. Knowledge of and experience in the use of Computer Applications. Excellent communication skills in English.

I am a mechanical engineer graduated from Hungary –Budapest in 1991, specialized in gas turbines field and I have been working for the past 9 years in gas turbines maintenance.

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I am working for 6 years as reservoir geologist(1997-present) I worked 3 years as mining coal geologist (1995-1997) and 4 years as geologist for drilling prospection and exploration of mineral resources (1986-1990).

Completion Supervisor, Cementing, Acidizing, DST, Workover

Eight years experience as a Title Examiner for title companies in Texas.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Worked for Exxon January thru March 2004. May of 2004 I went to work for Galleon Energy and supervised the drilling of eight holes in the Peace River Arch. Seven of these wells were gas wells from 1300m to 2300m. The last hole for Galleon was a 1600m oil well. Currently I am working for Shell Canada

M.Tech - Instrumentation and Control Systems; ABB Symphony Harmony, melody DCS - 2 years exp - Power plant Automation

Bachelor of Electrical & Electronics Engineering / Primavera P3 (3.1), MS-Project 2003, AutoCAD 2002

Recently qualified Electrical/Instrument Technician with High Voltage Experience

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Experienced Manager in the Combined Cycle Power Plant Operations

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

5 years extensive experience in spearheading entire gamut of manufacturing operations in areas of production design & maintenance in automobile ,automotive and packaging machines

Team work and Good communication skills

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Various Legal and Oil and Gas Administrative Experience

Profficient in surface, mineral and leasehold title research and reporting, lease aquisitions, due diligence, ROW, affidavits, oil, gas and mineral leases and other instruments.

Engineer petroleum

Electrical Engineering Manager/ Project Manager

NOV 2006 onwards. Production specialist. Petrofac Dubai

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out