Resume - Dear Sir/Madam: My goal is to obtain a entry level position in a drilling crew ...

Misco Jobs

Resume #2207

CONTACT INFORMATION:
View contact information...

Profile:
-    Experienced in industrial mechanics and mining technological processing;
-    Advanced knowledge of computer operations, including most Microsoft programs and designer software such as AutoCAD, Surfer, Geoeas, PhotoShop;
-    Ability to work and to learn to work whit various tools;
- Able to follow instructions;
-    Flexible, able to acquire new skills quickly;
-    Can work well independently, or as part of team;

Employment History:
Parkland Construction Ltd. Halifax, Nova Scotia

General Laborer May 2002-Nov 2002

-    I did different kinds of jobs, including framing, shuttering, grinding and drilling in the construction area.

Institute of Scientific Research and Engineering of Mining Process, Craiova, Romania

Design engineer of Mining Process

Mining department Sept 1997-May 2002

-    Provided engineering and design for lignite open-pit;
-    Developed design solutions using AutoCad, Geoeas, Surfer;
-    Performed duties of project leader for two years.

Geological Department March 1996-Sept 1997

-    Attended drilling crew in different lignite open-pit in Oltenia area;
-    Participated in many different drilling operations for geological research, hydro-geology research and water controlled drill;
-    Collected samples of the rocks from geological research drill;
-    Calculated the volume of holes, quantity of concrete and rubble for casing and cementing in water control drill, established the composition of the drilling mud.

SC Rich-Com SRL      Craiova, Romania
Maintenance Mechanic April 1994 – March 1996

- Provided general maintenance as an industrial mechanic for production line in a juice factory.

Power Station Isalnita, Romania
Locksmith/Mechanic July 1985- Nov 1985

- Worked as apprentice and provided general maintenance in a maintenance team in the boilers section of the plant.

Education:

1986-1992 Technical University of Petrosani Romania

I received a Bachelor in Engineering of Mining, specialization Mineral Processing.

1981 – 1985 High School, with industrial profile

I obtained high school diploma and a qualification as industrial mechanic.

Training and certification:

Ian 2003 - training course in entry level floor man/roughneck

Atlantic Petroleum Training College – Dartmouth, Nova Scotia

Certification: Feb. 2003 – Basic Survival Training
Jan 2003 – H2S alive
Jan 2003 – Fall arrest
Feb. 2003 – First Aid level1

May 2001-July 2001 training in Surfer and Geoeas

Sep 1999- Feb 2000 training course in AutoCAD

Institute of Scientific Research and Engineering of Mining Process provided these two courses.

Dec 1996-Feb 1997 training course in computer operations

I obtained a certificate in computer operations.

Languages: Romanian, English, and Italian.

Personal Interests:
Travels, Reading History Works, Internet Surfing

References Available On Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 10182)

Go to Search Parameters...

Brief Description

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Water well driling and development specialist.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

Senior Drilling Supervisor for 12 years. 19 years in oil industry. •Enthusiastic, determined, adaptable and focused with a good sense of humor. •Excellent management and team working skills, experienced in a wide range of cultures and environments.

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Offshore surveyor with geophysics experience

Radio Operator/Offshore Logistic Planner/Heli-admin

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

With more than ten years of working in different scope of manufacturing plants in the field of Quality and Safety, i am deeply qualified to your employment requirement. I am also a computer knowledgeable person. I can work also with different nationals in one company. Thank you very much.

I have worked in the Middle East for the past 16 years my last position was working for Canadian Nexen on their Oil Storage Export Terminal in the Republic of Yemen during my employment with Nexen I held various positions I started as Mechanical Technician.

Estimation Engineer - Instrumentation.

QA/QC professional experience in management, inspection, and a highly developed working knowledge in construction environments gained over more than 10 years of Oil/ gas plants, Petrochemical plants, Oil Refineries, Plant producing Facilities, pipe lines, Storage tanks, Reservo

MBA +9 yrs experience in materail managment

I am having Eleven years of experience in field of Electrical Engineering as a Planning & Estimation Engineer. I am looking for a challenging opportunity in field of Project planning.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

working as senior production trainer refinery at petrosa south africa. was shift supervisor commissioned 3 refinery units from scratch as shift supervisor, see resume

Diploma obtained after 03years of technical school since 1972 to 1975 brevet of technical school.

Performing work as per international standards following operational excellence management system

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I,m familiar to operate with various analytical Instruments Laboratory such as Gas Chromatograph, AAS, Spectrophotometer (Visible, UV,IR) , bomb calorimeter, viscosity meter, flash point meter, pH meter, turbidity meter, conductivity meter, glass ware apparatus for titrimetric method.

I am diploma engr in mech. engg. having 18 years expr. in maint. of process plnat equipment

Certified Rigger

Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refining, Liquefied natural gas (LNG) production and gas processing, process design, Offshore oil and gas platform deisgn (topsides), process simulations (Hysys), conceptual process design, detailed process design, Training.

Coil Tubing , 18 yrs worldwide, Coordinator, CT Drilling Systems, Project Engineering/Manager

12 + YEARS OF EXPERIENCE IN BOILER, BOILER AUXILIARIES - DESIGN AND DETAIL ENGINEERING

SUMMARY: Health, Safety and Environmental Management Professional seeking a challenging position in an established and dynamic organization. With about 8 years experience with the oil and Gas industry and with good Experiences in Environmental management, project management, Regulatory compliance

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

12 years of expereience in medical emergencies,7 years expereience as offshore rig medic, 2 years as trainee HSE

Can setup run &standardise petroleu testing lab. Familiar with all petrleum product testings, full acquainted with ISO-9002 Quality assurance system & with MS Office & email/internet applications. Accredited as Petroleum Inspector from IFIA, UK. Neatness, accuracy, thoroughness in work

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I have over ten (10) years of diversified experience in Planning & Scheduling, site supervisory ,quality control and other related engineering job on EPIC projects including Structural, process mechanical, mechanical piping, electrical, instrumentation, telecommunication and fire & gas systems.

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Management of chemical lab with water and oil analysis/testing

My research is mainly about modeling

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

With very strong drilling background, I will be competent for any drilling related job assigned

To secure a Senior Contracts/Management related position within an internationally focused organization servicing the petroleum, mining, construction or telecommunications industry utilizing my negotiation, management and administration skills.

Project Execution of EHVAC and HVDC Electrical Power Transmission as EPC contractor having direct experience of Engineering, Project Management, Procurement, Installation and Commissioning of Indian and Overseas projects.

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Operates processes in the plant and handled control room DCS or PLC, mostly equipment such waste gas treatment plant, waste water treatment plant, chiller, air compressor, kneader, calciner, cooling tower, furnace and knowledge in the tank farm activities, some analysis required in the process

Control Room Operator (DCS)Honeywell Chief Operator/Step-up Chief Operator Honeywell TDC2000/3000/Plantscape Refinery Unit Trainer - Classroom/OJT Technical Writer/Author (Procedures) Refinery Unit Start-up/Shut Down Commission New Equipment/Processes Precommissioning Coordinator Safety

Dear Sir/Madam: My goal is to obtain a entry level position in a drilling crew in offshore, anywhere around the world.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out