Resume - Pre-commissioning Engineer

Misco Jobs

Resume #22415

CONTACT INFORMATION:
View contact information...

SUMMARY
Over 12 years experience in oil industry working on a large range of projects mainly in the Pipeline Pre-commissioning Engineering and Project Management discipline.

Areas of responsibility include Project management, Project Engineering, and Offshore Representation. Main categories of experience are as detailed below:-

Hydrotesting, Flooding, Cleaning, Caliper Pigging, Vacuum drying, High velocity Flushing, Dewatering, swabbing, pipeline wax removal, pipeline drying, Pipe stalk Cleaning, Gel pigging, pipeline excavation, pipeline isolation, umbilical commissioning, Dewatering with live gas / crude, Pig Launcher design and fabrication, deepwater flying lead Installation, free span correction, deep water project experience, experience with deepwater Cameron connector tooling, rigid jumper installation in deep water, Nitrogen / Helium Leaktesting, offshore construction and installation experience, Remote Vehicle Knowledge, Coil Tubing, Scale Squeeze, Acid Washes and Well Intervention activities.

The above experience has been gained through working on UK / Danish North Sea projects / Norwegian North sea Projects / Dutch sector projects / Irish Sea / Nile Delta Development.

Completed the OPITO approved Further Offshore Emergency Training Course, OLF European Refresher Course, Shell UK MAPS Safety Course and a holder of valid UK medical certificate.

EDUCATION & QUALIFICATIONS
Sep 1987 - Mar 1990 Fife College of Technology
HND Mechanical Engineering

1981 - 1987 Balwearie High School, Kirkcaldy
'O' Levels - Mathematics, Chemistry, Physics, Biology, Modern Studies, Geography

ADDITIONAL TRAINING
Project Management 5-day course
Training for Supervisors 3 day course
COSHH Assessors course
Risk Assessment Training 3 Day course
Contractual and financial awareness training
Microsoft Project 98, 5-day course
Introduction to Microsoft Word 97 and Excel, 5 evening college course
IOSSH "Health and Safety at work", 2 day course
European Offshore Fire Fighting & Survival Certificate
Free Fall Life Boat Certificate
Team Leader Permit To Work Certificates
Nitrogen Pumping Course
Pressure Testing Course
Cementing Basics Course
Banks Man/Slinging Course

EMPLOYMENT HISTORY
Sep 2005 - Present Providing Pre-Commissioning Engineering Services as Ltd Company
Pre-commissioning Expert

Construction Specialist Ltd, Aberdeen

Oct 2003 – Sep 2005 Technip Offshore UK Ltd, Aberdeen
Senior Project Engineer (Topside / Subsea Pre-commissioning and Subsea construction and installation)

Project:
Simian / Sienna and Sapphire Gas Fields located in the Nile Delta.

The field development consisted of 14 No 10" Rigid Flowlines, 1 No 20" Pipeline, 2 No 26" Pipelines and 5 No 4" Pipelines. The flowlines and pipelines lengths ranged from 2 km to 114km. The Simian Gas Field lies 114 kilometers offshore in depths of water nearing 1000 metres.

Main Responsibilities:
* Precommissioning Subcontrators Management for all related Activities.
* Umbilical Commissioning Assistance.
* Management of Subcontractor for supply / manufacture of 40 Caliper Pigs
* Trail / design of Dual Diameter dewatering and caliper pigs
* Trailing / selection of pig suitable for 4" 114 km pipeline.
* Design and Interface with Subcontractor of Deep Water Flooding module and Electronic Gauge Pig.
* Deep Water Pig Launcher and Receiver Design.
* Management of Pig Launcher and Receiver and pipeline laydown head Fabrication,
* Deep Water Pig launcher / Receiver and Rigid Jumper installation using Cameron Connectors.
* Offshore Representation for Flying Lead installation and Free Span Correction.
* Vessel Mobilisation Procedures / Attendance in Foreign Ports
* Good Knowledge of Deep water ROV tooling with construction and Installation Experience.

May 2002 – Oct 2003 Qserv Pipeline and Process Ltd, Aberdeen
Project Manger (Topside / Subsea Pre-commissioning)

Main Responsibilities:
* Management of all Pipeline and Process Projects.
* Management of Onshore and Offshore Personnel.
* Development of Company Quality and Health and Safety Procedure to achieve ISO-9001:2000 and OHSAS 18001 status.
* Preparation and review of Tender Documents.
* Project Commercial Management.
* Provision of Engineering and Technical Support to Engineers.
* Asset Management / Management of Equipment New builds.

Jan 1999 – May 2002 Copipe Systems Ltd, Aberdeen
Project Co-coordinator / Manger (Topside / Subsea Precom)

Projects:
Ranger Kyle Field Development, THE "Texaco, Hess and Elf" Call off contract, McCulloch Field, Gannet 'G' Field Development Development, North West Bell Field Development, BP Schehallion Riser Vacuum Trials, Conoco Vampire Field Development, Conoco Jupitor Field Development, Texaco Captain Expansion, Cook Field Development, Erkine Lomond Pipeline Repair, Nelson Field Development, Captain Field Development, Blake Field Development, Clyde Field Development "Dutch Sector, Veba Hanze PSP Field Development "Dutch Sector", Mobil Lewis Field Development, Eat Telford/Angus Field Development, B.P Davey Field Development, B.P Hoton Field Development, Caledonia Field Development.

Main Responsibilities:
* Interface with clients to ensure customer satisfaction and service requirements are being rendered.
* Management / Co-ordination of Multiple Pipeline and Process Commissioning Projects.
* Management of Offshore Personnel and recruitment of resources.
* Development of New Technology.
* Implementation of Project Risk and Coshh Assessments
* Account Manager for the companies main Client Coflexip Stena
* Review and Preparation a of Tender Documents.
* Project Commercial Management.
* Resource Planning and Scheduling.
* Project Procurement and cost management.
* Responsible for equipment management / sourcing of equipment resources to fulfill commitments.
* Responsible for Development and appraisals of Engineers and offshore personnel.
* Provision of Engineering and Technical Support to Engineers.
* Asset Management / Management of Equipment New builds.

Mar 1996 – Jan 1999 Copipe Systems Ltd, Aberdeen
Project Engineer (Topside / Subsea Pre-commissioning)

Projects:
CDP Alliance Support, Scott Field, Troll Phase 1, Tiffany Platform, SHL Viking 'A' Decommisioning, Santa Fe, Texaco Galley Field Development, Hutton Fuel Gas Import Pipeline, Petronella Field Development, Texaco Galley Field phase 1, Mcculloch Field Commissioning, Magnus Field Development, NAM L9 Field Development, Talisman Ross Field Development Phase 1, Janice Field Development

Main Responsibilities:
* Development of Project Procedures and QHSE quality Plans
* Project Technical and Financial Risk Assessments.
* Development of Project COSHH / LOLER and PUWER Plans
* Co-ordination of Offshore Personnel.
* General Project Engineering and supporting Calculations.
* Review and assistance in preparation of Tender Documents.
* Procurement
* Project Planning and Scheduling
* Project cost analysis.
* Responsible for equipment management / sourcing of equipment resources to fulfill commitments.
* Responsible for Development and appraisals of Trainee Engineers and Field personnel.
* Provision of Engineering and Technical Support to Trainee Engineers.

Jun 1993 – Jan 1996 Progenitive Services Ltd,Aberdeen
Service Supervisor

Main Responsibilities:
* Supervising Offshore Fluid Pumping Operations, triplex and centrifugal pumps.
* Supervision of well head intervention.
* Supervision of Scale Squeeze Opeations
* Coil Tubing Supervisor for Gas lifts and well clean up operations including milling.
* Assistance in slick line crew for safety valve change outs / logging runs on electric line.
* Equipment maintenance and fault finding.
* Participation in well head management
* Rigging up of temporary chicksen suitable for hydrocarbons
* Supervision of well Acid washes.

Jun 1993 – Jan 1996 Comtec Commissioning Technology, Aberdeen
Offshore Supervisor/ Project Engineer

Main Responsibilities:
* Supervising Nitrogen Helium Leak Detection Operations
* Supervising Platform Shut Down activities.
* Valve Integrity Testing
* Bolt Tensioning.
* Flange Integrity Management.
* Update of System P.I.D with Auto Cad to reflect As Built Status.
* Shutdown equipment and consumable management.
* Preparation of procedures and Test Packs.
* Operation of Mass Spectrometers and Nitrogen pumping equipment.
* Offshore Crew Supervision.

Nov 1991 – Mar 1992 Dalrymple Construction Ltd, Kirkcaldy
Steel Building Fabricator

Main Responsibilities:
* Cold Cutting of Steel I beams
* Welding
* CNC Lathe Programming / Operator
* Construction of Steel framed buildings
* Cladding of Steel framed buildings.
* Onsite Inspections for Building construction and repairs.

Nov 1990 – Mar 1991 Alval Process Engineering Ltd, Leven
Trainee Design Engineer

Main Responsibilities:
* Pressure Vessel Design and Drawings to B.S. 5750 and A.S.M.I Welding
* Detailed fabrication Drawings for Bin dischargers and Spay Dryers
* Production of Manufacture Data Books.
* Design Calculation Trainee
* On site commissioning of Chemical process plants
* Product Improvement research and development.
* Auto Cad Training / Drawing

References:
Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 9785)

Go to Search Parameters...

Brief Description

I'm looking for a challenging position in Oil & gas companies.

Planning, scheduling and coordination of major projects and maintenance works in the Oil and Gas Industry

Strong analytical and quantitative/problem solving skills. Excellent inter-personal communication skills and comprehensive knowledge of computer programming (vb, SQL, C++). Experienced in research in Petroleum Engineering, Geothermal and Chemical Engg. Administered Web sites, designed databases.

Chemical process engineer with graduate education and five years of experience in the oil and gas industry. Project manager and leading specialist in process design, scale-up and modelling. International exposure through collaborative R&D projects with commercial and development partners overseas.

Dear Sir, I am a Geologist, Presently I am working with Sperry Sun Drilling Services (a Halliburton Company) for PDO (Petroleum Development Of Oman).

SEEKING A BETTER POSITION FOR THE POST OF ADMINISTRATION/ACCOUNTS/SECRETARIAL IN A WORLD CLASS COMPANY

Draftsman first, Millwright, always!

30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.

I'm employee in Jordan Petroleum Refinery Co, I am working in main work shops as technical " ability design & fabricate all kinds of gears As helical, bevel, spur & worm gear" , ability using lathe machine & other production machine.

I am a drilling engineer, I develop, plan, cost, schedule and supervise all stages of well-drilling from the initial well design to testing, completion and abandonment. My Typical work activities include: designing; undertaking casing design; drawing up the drilling programme.

Reservoir Engineer with 10 years experience. From 1993 to 2000 I worked in SOCAR(Guneshli project with BP-AMOCO & TotalFina using IRAP RMS and OFM, Eclipse). From 2000 to 2001 in Karasu Operating Company as reservoir engineer. From 2001 I am working in Schlumberger as reservoir engineer.

Graduate Mechanical Engineer+ SAP AG MM certified consultant 11 years of experience in a leading Chemical Fertilizer industry as Piping erection / Project, Maintenance and Materials Engineer

Mechanical Engineer,17 years experience in: Piping Design,Sup. Construction, Pre-commissioning and start up for Deshydrat. crude oil/Gas Plant; Surface/on land Facility Engineer. Handle of norms Ansi/Asme/Api. Hydrostatic and Welding Test. Aws Member.

Master of Science degree in Petroleum Engineering from Texas A&M University and Bachelor of Science degree in Mechanical Engineering from Universidad de Oriente (Venezuela) with over seven years of experience in a major oil/gas company.

Professional manager with 10+ years experience and Russian native language is looking for challenging position in general administration, finance, sales or marketing.

•Strong Knowledge of CIS and Western manufactured oilfield related equipment and OCTG markets, policies and regulations, standards, international trade and marketing techniques. •CIS and Western O&G industry related connections •Fluency and literacy in English and Russian. •Computer literate

Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Experienced directional driller with 26 years drilling rig experience seeking new opportunities.

Operate as part of a team of engineers in carrying out detailed engineering works and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

Process modelling using "ASPEN HYSYS" & PIPING ENGINEERING COURSE

MS applied Geology From AJK University Pakistan and 6 month computer dimploma and 4 month englihs language diploma. i am very good in field work and field report writting.

ELECTRICAL TECHNOLOGIST/SUPERVISOR with proven leadership skills, vast experience in the chemical, Power and Research and Development industry. Worked for WATER AND POWER DEVELOPMENT AUTHORITY, ENGRO CHEMICALS PAKISTAN LTD AND SUPARCO. Examples of the plants and situations I have handled include, P

Seeking a petroleum engineering position where I can apply my analytical skills as part of a multidiscipline team to yield results and grow

Mechanical Design Engineer

Engineer with a scientific base, high analysis capacity, and development of projects guided to the exploration, drilling and development of oil fields in order to exploit our resources

2001 to 2004 working at Smiti International Gulf Services (OMAN) as a Drilling Tubullars Inspector. 2004 - Cuurently working at MB Petroleum Servics as Completion Field supervisor

Process Design Engineer with 3 yrs exp.Basically a BTech Petrochemical Engineer,versed with Aspen Hysys,Flarenet,Aspen Plus,Process calculation worked for International FEED & Detailed Engineering projects

My objective is to become an employee who is committed to contributing to professional/career excellence. Being an individual who is given to continuous learning and development, I am always willing to harness from my skill pool, experience, and specialized area of training; to be the best I can

Instrument&control engineer (DCS,PLC) oil & gas field

Data processor / interpretation software, QC and reporting of Analogue & 2D Seismic Data.

HSE advisor, also experienced as a Chief/ Safety/ Helicopter Landing Officer in organization Site Safety Procedures and practices, overseeing the construction and production of the large Storage tankers, FSO, MOPU

21 Yr Exp Power Electronics - Electrical Engineer, Large Variable Speed Drives & Motors, Automation

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

Electronic Engineer

Entry level Process Engineer,BS and MS Chemical Engineer

I work and live currently in Canada, Work as a Well Testing Supervisor, Willing to relocate and work anywhere in the world, I am single, Willing to negotiate a wage or salary. Experience in high pressure low temp sour service high stage equipment. Thank you for your interest in my resume,

Master Degree Pipeline Engineering

Seeking a position with a company that has growth potential both individually and team wise with a vision for the future, as well as, the ability to utilize Managerial/Supervisory skills to help maximize Company Growth/Productivity.

A full time opportunity as an Aerospace Engineer to utilize my extensive skills in Management, Design, Manufacturing, CAD/CAE/CAM tools and Computer Programming.

BSc.(Engineering) and PGD (Engineering) in Petroleum Engineering - 2 Year experience and hand in Reservoir Simulations

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Foreman on Oil Jobs

I have been employed by Drilling & Workover organization in Saudi Aramco as a contractor of a service company from July, 1997. As a Materials Coordinator/Expeditor and Project Coordinator include my responsibilities assisting material Advisors at Material Acquisition and Forecasting Unit; coordinat

Pre-commissioning Engineer

Graduate engineer with specialization in metallurgical engineering and professional experience as welding engineer in the fabrication field for the past 10+ years. CEng MIOMMM MWeldI, ASQ-CQE, API 510 pressure vessel inpsector, CSWIP Senior Inspector

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out