Resume - Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and re...

Misco Jobs

Resume #22491

CONTACT INFORMATION:
View contact information...

Project Engineer and Construction Management

HISTORY: Over 25 years Experience in Engineering, Construction and Project Management with over 20 plus years in oil and gas projects.

EDUCATION: BSME California State Polytechnic, San Luis Obispo, 1972

PROFESSIONAL REGISTRATION:
Mechanical Engineer Registered in California and Oregon
Project Management Institute- Certified Project management Professional PMP
Current Saudi Aramco (Aug 2001 to current)
* Lead Project Engineer and Closeout Coordinator for Saudi Aramco "Sales Gas Pipeline Conversation Project for Yanbu." The Area Lead Project Engineer responsible for all Contractor Construction Activities in Spread 3 (upgrades of 350 kilometers of 48 inch pipeline, 3 Pump stations, and 16 Remote Operated Mainline Valves Sites). The primary activities were decruding and cleaning of the existing E/W oil pipeline line, replacement of corrosion damages sections, installation of all new mainline valves, launchers and receivers, and replacing and daylighting all the station bypasses with new materials suitable for dual oil and gas services, preparation of change notices and Mechanical Completion. Close out coordinator responsible for obtaining the final Performance Acceptance Certificate (PAC) from the Proponent Organization and all warranty issues.

Bechtel Work History (Mar 92 to July 2001)
* Project Engineer for BPC Pipeline Project based in London Hammersmith. The Engineering Coordinator was responsible integration of the engineering design services for both engineering contractors into one consolidated project for British Petroleum between a Kvaerner and Bechtel Engineering groups. The BPC project was for two 100 kilometer pipelines from the Caspian Sea to the Turkish border through Georgia and Ajabajan.
* Pipeline Project Engineer for the Saudi Aramco Sales Gas Pipeline Coversion Service to Yanbu. The Project provides for the conversation of an existing 48 inch 1000 kilometer pipeline from crude service to gas services and the design of a batch tracking system on a parallel 56 inch multi products crude pipeline system

JOSEPH A. BLOCK Project Engineer and Construction Management
* Lead Pipeline Engineer for the Chevron USA for the development of the Papua Nuguni Moran Oil Field. Responsible for pipeline and road routing, sizing, and related facilities for the transportation system for a 3-phase oil gathering system and a ultra high pressure (6000 psia) natural gas re-injection pipeline system in the PNG highland development. The project is located in some of the rough highlands in the world and Asia-Pacific Region with well pads and pipelines elevations ranging from 800-1700 meters. Initial field well development and gathering pipelines were installed by helicopters.
* Engineering and Construction Manager overseeing the PG&E Australia's "Wide Bay and Brisbane Sales Gases Project" responsible for the engineering and construction management, planning, staffing, routing, budgeting and construction for Capital Pipeline Projects Group. The combined budget for these projects was in excess of AU$200 million. The size of the pipelines and related facilities varied from 4 h through 16 inch diameter pipelines and intermediate compressor stations. The total installed length of the three projects is 750 km.
* Engineering Manager in the Office of the Petroleum Authority of Thailand responsible for managing and coordinating gas and liquid petroleum projects. The work included overseeing the pipeline system modeling, optimization studies and constructability analyses. Construction responsibilities included overseeing the LSTK Contractor activities for a 200-kilometer of 28/36-inch natural gas pipeline. Similarly as Bechtel's Construction Engineer perform for an LSTB contract for the 100 kilometer Wang Noi 36-inch natural gas pipeline extension. Most of the project involved crossing swamping lands and rice paddies..
* Engineering Manager Engineer for Multi-Products Pipeline System Master Plan in Thailand. Responsible for coordinating study and design with the client, evaluating gasoline, diesel, jet fuel supply and demand requirements, evaluating system hydraulics, performing economic analysis and modeling for delivering to the Northern Providence from Bangkok, and presenting study results to Client's Senior Management.

JOSEPH A. BLOCK Project Engineer and Construction Management
* Engineering Manager for Gas Master Plan and Project Specific Feasibility Studies for gas transmission projects in Thailand for a 15 year look ahead. Client liaison in Bangkok with PTT responsible for coordinating studies with USA based engineering, evaluating gas supply and demand requirements, developing system concept, and presenting study results to Client's Senior Management.
* Engineering Study Coordinator for LNG Receiving Terminal Feasibility Study responsible for coordinating the study with the client, managing Environmental Impact Assessment (EIA) Subcontractor, and coordinating site investigation activities in Map Ta Phut and Laem Chabang for 10 million metric tons annual receiving facilities.
* Project Engineer for Pacific Gas Transmission Company's (PGT) 90 mile, 12"/16" pipeline expansion lateral. The Project Engineer responsibilities included completion of engineering drawings, bid specifications, and together with performing the field engineering and coordinating the survey activities during construction.
* Pipeline Specialist for a variety of North American pipeline projects and studies. Responsible for pipeline route selection and reconnaissance for basic engineering, cost estimating, environment sweeps, and pre-construction centerline surveys.
* Construction Management, PGT-PG&E Pipeline Expansion Project. Project coordinator for all post startup activities on the California portion 400 mile 42" natural gas pipeline. The post startup activities included supervision of construction procurement, field accounting, erosion control, subsidence, warranty, and land closeout.
* Project/Commissioning Engineer for 800 miles of 42" Natural gas pipelines. As the Project Engineer oversee and manage the field engineering field engineering, surveying, routing, change orders, cost estimates, claims and as-built effort for California Spreads. Commissioning Engineer responsible for pipeline startup, maintaining client liaison, pipelines commissioning, startup, and writing commissioning procedures for pipeline, valve testing hydrotesting, and drying.
* Commissioning Engineer. Supervise and coordinate all activities associated with shutting down 850 miles of existing 36" Natural gas transmission facilities for completing 34 hot taps and 6 major pipeline mainline compressor station modifications over a 72 hour shutdown. The Commissioning Engineer was responsible for producing schedules, writing procedures, overseeing safety coordination, scheduling of inspectors, welders, radiographic and complete documentation for the construction teams on 5 separate pipeline spread subcontractors,

JOSEPH A. BLOCK Project Engineer and Construction Management
Previous Work History
* Engineering Consultant: Owner's Representative responsible for review of the construction contracts, quality control, and drawings for code enforcement, State and Federal Regulations for an 850 mile 42" pipeline project.
* Engineering Consultant: Provide engineering, consulting, and management services to public and private industry. Responsible for project coordination and development between owners and operations personnel. provide engineering support services and prepared contract specifications for all phases of construction.
* Engineering Consultant: Construction Manager and Chief Inspector for the expansion of 1.2 BCF per day custody transfer meter station. Coordinate the various mechanical, electrical, and drafting activities prepared project schedule; wrote specifications and subcontracts; secured bids and proposals. As Chief inspector, supervised construction activities and performed the duties of General Contractor.
* Commercial Construction Manager and Sales Engineer. Overseeing and supervised 10 to 16 working field supervisors in thermal insulation of mechanical systems, responsible for managing, estimating, bidding, negotiation, purchasing, job planning, scheduling, and sales for between 25 to 45 multiple projects on the western coast of the USA..
* Gas Engineer. Provide engineering support for operation of 600 miles of natural gas transmission.
* Gas Engineer. Perform the duties of Staff Engineering in the construction group. Chief Engineer/Inspector for emergency rebuilding of natural gas compressor station after a fire in 1975.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 9900)

Go to Search Parameters...

Brief Description

Expert Mediator and Problem-Solver

I am a consultant for the petroleum refining industry and have found this endeavour gratifying. I would like to continue serving clients that need an occasional assist from an experienced professional in reviewing proposed projects, operating strategies or operating problems or opportunities

an industrious, focused minded person with great leadership qualities and skills able to build teams that will think creatively and design profitable organizational changes

DCS Panel Operator in Oil refinery/Petrochemical plant

Application of Project Management to Projects. Areas of expertise: Project Management, Cost Engineering, Planning and Scheduling, Engineering and Construction, Power Plants, Petrochemical Facilities, Offshore Oil Platforms, Pipelines, LNG Plants, Ports, Industrial Facilities, Bridges, Airports.

Objective: To utilize technical and administrative skills with business acumen to expand business to generate more revenue and profit.

Electrical and Instrument Engineer

Dedicated HSE professional with diverse experience and eligible for the examination of Certified Industrial Hygienists (CIH).

Highly-motivated project engineer/project manager with extensive experience in the design and project management of natural gas transmission and gathering pipelines and associated facilities. Key strengths include: a broad base of knowledge and the ability to solve difficult problems

I am a Senior Directional Driller with Schlumberger Overseas SA. Graduated from Colorado School of Mines, USA in Petroleum Engineering

HSE SPECIALIST, Skillful on Risk assessment, environmental impact assessment, HSE audit, accident and incident management, HSE reporting, emergency response and preparedness, HSE training. Safety management, environmental management,

Instrument

I'm a graduate of Bachelor of Science in Accountancy, class of 1996, at Polytechnic University of the Philippines, gained total of 12 years experience in Accounting with a combination of Administrative task.

A fully certified (NACE CIP I, II, & III) & highly motivated manager with over 18 years experience in the Oil & Gas Industrial Painting Sector. Over 15 years of this experience has been in the field of corrosion engineering projects for Shell, BP, DNV & International Coatings.

With more than four (4) years of qualified experience in Supply Base Operation from Warehousing and Logistics, including Material control, Equipment movement and five (5) years in Material Management and Procurements. Including cargo handling operations, document controlling and personnel supervis

I have got 12years of extensive experience with sound technical background in the maintenance of large turbo machines such as turbines (steam and gas), compressors (centrifugal, axial, screw and reciprocating),and various types of pumps present in offshore, large Refinery, petrochemical, Power and d

A safety professional having more than 14 yrs of experience in oil & gas industries

Experienced Piping Design Engineer

System Analyst with 16 years experience. Skills - Visual BASIC, MS SQL, Oracle, OSA

25 years of experience in the oil and gas industry working with various companies on varied projects from the office phase to final production and beyond.

Over 16 years of experience in Oil and Gas facilities design, construction support and process piping design. FEED experience as an EPC contractor and as Oil Operator/Owner/Client. Greenfield & Brownfield engineering design experience.

Had gained tremendous experience in Product Planning and Scheduling. Good in modeling and analysis. Holds Master Degree in Chemical Engineering.

10 years experience working in in-house seismic processing and Field QC processing around the world

Over 10 years of working experience, including more than 9 years in Administration, Human Resources and Procurement in the Oil and Gas Industry.

Over ten (10) years experience in mechanical engineering for major oil, gas and petrochemical projects. Proficient in basic and detailed engineering, construction supervision and monitoring, project planning and control. Working knowledge of engineering codes and standard.

An experienced Engineer of over 18 years of Industrial experience with a high level of expertise in a variety of related aspects of Project & Operations Management and Process Engineering Management within the Oil and Gas Industry.

B.Sc. Mechanical Engineer. Over ten years experience in maintaining, overhauling and technical support for rotating equipment used in the oil and gas industry. Experienced with budgets, scheduling, calculation and analysis of rotating equipment repair requirements.

Use my skills and experience for your mission critical UNIX Infrastructure

QA Manager with 20+ years diverse experience

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

Reservoir engineering, development plan and management of upstream projects.Exceptional communication & interpersonal skills,In depth experience, in strategic planning, identifying new opportunities, execution of business plan, managing policies, problem solving, motivation and training,

I am having experience in Both static & rotating equipments

BE Chemical

I completed B.S. Chemical Engineering and I have 19 years working experience in Refineries and Gas plants in which 9 years worked as a Shift Supervisor. At present I am working with multinational workforce in Adnoc, Ruwais Refinery, Abu Dhabi, UAE.

Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and related Stations. USA Professional Regestration Mechanical Engineer and Certifiec projectmangement Professional PMI USA. Oversea work prefered including remote sites. Currently with Saudi Aramco, Saudi Arabia.

SKILL SETS. Purchasing Department Director for a large International Organization, Contract Negotiation, Vendor Selection Process Management, Projects Management and Follow Up, Inventory Control Management, Strong Computer Skills

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

Senior Project Manager/Engineer (Offshore Projects)

I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.

International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

20+ years in oil industry with extensive international exposure. Most part in drilling rigs management, but also human resource management, general management and more recently a training coordinator and Instructor for well engineers.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Offering extraordinary experience in areas of purchasing, material coordination, project management, inventory control, and supervisory abilities. Seeking opportunities with a team organization in the natural resources extraction industry.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out