Resume - Total working experience 06 years. DCS operator with 06 years of diversified exp...

Misco Jobs

Resume #22929

CONTACT INFORMATION:
View contact information...

TECHNICAL QUALIFICATIONS
(AUG 1995 – SEP 1998) Three year diploma of associate engineer in chemical technology (2145/3200) from G.C.T MULTAN (1st division)
Matriculation (JUNE 1994 – MAR 1995) Matriculation in science from Multan board of education (1st division)

SPECIAL TRAINING / COURSES:
* Safety & Fire Fighting Training - Attock Refinery Ltd Rawalpindi.
* Work Permit Policy Training - Attock Refinery Ltd Rawalpindi.
* Skimming of Catalyst Training - Attock Refinery Ltd Rawalpindi.
* Safe Start Up & Shut Down Training - Attock Refinery Ltd Rawalpindi.

PROFESSIONAL EXPERIENCE: (above 05 yrs) from 1999 to till date.
* 5 years experience with Attock Refinery Ltd including Erection, Precommissioning and Commissioning of. HYDRO TREATING & FIX BED PLATE FORMING UNIT
* Presently working in Attock Refinery Limited at NHT/ SR Plant as a DCS Panel Operator.
* Also worked as Field Operator In charge at plate-forming unit plant.
Job Responsibilities:
* Controlling and monitoring unit parameters by DCS and Panel in technically safe manner.
* Reporting unit/section status or operation status to Shift Engineer with shift logs/shift report.
* Communicating with Field Operators.
* Shut down & Safe Start up Procedure (Normal as well as Emergency) of NHT/Plate-forming Plant.
* Troubleshooting in safe action of NHT/Plate-forming Plant in case of any emergency.
* Coordinate with oil movement dept, for the proper throughput of products according to specifications
* Follow Standard Safety Procedures, Work order and Work permit.
* Preparation of Unit Daily Summary & Material Balance.
Up gradation Project experience:
The Up gradation and Expansion Project of ARL which enhanced its Production capabilities to 37,500 BPSD.The ARL, s with its operation dating back to 1922,is the first Crude Oil Refinery of Pakistan. I was involved in its Erection, Pre-Commissioning and Commissioning activities,
* Punch Listing. Line Flushing / Blowing. Dry Out Procedure of Heaters
* Pressure Testing. Overall Tightness Test (OATT)
Monitoring The Operation & Trouble Shooting of Following Equipments:
* Pumps & Compressors.
* Heaters.
* Distillation towers.
* Utilities and cooling tower.
* Heat exchangers.

DISTINCTIONS:
* Awarded an appreciation letter from CEO (ARL) on HARD WORKER at NHT/Plate-forming Plant.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 10924)

Go to Search Parameters...

Brief Description

CSWIP Senior Welding Inspector

Diploma in Engineering in Electrical Instrumentation with 74.9% marks from ALIGARH MUSLIM UNIVERSITY (A.M.U.) in July 2000.Knowledge about the world class Manufacturing Practices (tools of TQM) like PFMEA, 7QC, SPC & MFO,Trained internal auditor for ISO 9001-2000 from QMI-INDIA

Professional formation in Petroleum Engineering with experience in Drilling Engineering. Wide knowledge in Drilling Software, planning, administration and control of Drilling Projects, SAP system, bid evaluation, and field operations. Languages: Spanish, English and German.

Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.

Project Controls Specialist, Project Services Manager, Project Controls Manager, Cost Control Manager

Indutstrial Focused Nurse

Warehouse exp looking for a change

A challenging position mutually beneficial and long term oriented career in Industrial Companies (Research Centers, Manufacturing Groups, Factories, International Agencies, etc.,) or an outstanding position in Administration leading to a carrier in International Business (Import & Export, Internatio

State of Alaska Licenced Journeyman

Mechanical Maintenance of Refinery, petrochemical and Mining Equipments [Static n Rotary]

Over 20 years experience as Project / Construction Manager on overseas assignments. Extensive experience in pipe design, fabrication and inspection of refineries, LNG plants, chemical plants, power plants, pipelines and mining facilities. After college, started a career as a craft pipe fitter in Hou

Undergone training in Industrial Automation using PLC & SCADA

14 years of diversified project management and controls experience (EPC) in the oil and gas industry (up and down stream). Assignments include: Project Manager, Project Controls Manager, Lead Scheduler, and Lead Cost.

Heavy Lift Manager

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

NDT & corrosion&welding engineer, participate in large project in Egypt and in Sudan

Total working experience 06 years. DCS operator with 06 years of diversified experience in the field of petroleum refining industry. Have been performing shift duties at Attock Oil Refinery, at Naphtha hydrotreator & Catalytic Reforming unit as Control Room Operator. Well versed with the

Bachelor of Science in Physics.truck license driving

Fresh Chemical engineer had an internship & training, had computer skills with many softwares, Fluent in English as Arabic, & he is looking to prove him self as a success engineer in challenging work.

I'm seeking a job especially through the export-import sector.

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Engineering Physics graduate looking for an entry level job: Environmental, ocean, weather, energy, gas, oil, R&D.

Instrument Technician

I’m a chemical engineer with 6 years experience worked as process engineer, operation engineer on a NGL plant

After 6 years of work at the world’s biggest oil refinery complex, I have obtained great experience in predictive, preventive and corrective maintenance of rotating equipments, machines start up and failure root cause analysis.

Civil engineer with six years experience in the oil & gas Industry. 1 1/2 years as buyer and 4 1/2 years as control projects Eng (planner, estimator, cost control, contracts administrator)

I am a graduated Electrical Engineer from a reputable university of Pakistan. (UET Taxila). & Throughout my studies, I maintained first class academic record overall. secured (84 %) marks in my final year Engineering. I want to serve your company as an Engineer.

A fresh graduate from the premier university in the Philippines, is geared to apply his extensive academic and research abilities to a company that requires passion, dedication and commitment to excellence from its entry-level applicants.

I am seeking a position in the field of Environmental clean-up. I would be an asset to your company because of the fact that I am a dedicated individual and recently obtained my bachelors degree in Management from the Indiana University School of Public and Environmental Affairs.

6 years experience of Project Management & Execution, Construction Supervision & Quality Surveillance in the Field of Power, Oil & Gas – Pipe Lines with confident communication and Planning Skills.

Applicant a BE chemical graduate to pass out in August 2003. Looking for a job in a chemical industry as a trainee or junior engineer.

This is my resume and my personal details

Ambitious, motivated and enthusiastic to achieve and excel, I am seeking a challenging position in a leading organization providing opportunities of career growth. although I have telecom experience I am ready to take an engineering management job in the oil industry.

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Junior Mechanical Static Equipment Engineer

Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.

Onshore oil gas pipeline construction, coating, testing, commissioning and start–up; pigging / intelligent (in – line) inspection; pipeline maintenance / maintenance management; good knowledge related to pipeline detail design, route selection, alignment sheets and relevant international standards

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Honour degree holder, project management, project manager, ship repair manager, singapore shipyard

B.sc of Chemical&Petroleum Refining Engineering

Project Management/Operations

Supply Chain and Procurement Professional for oil and gas construction projects

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Heavy Duty Mechanic

I am a HSE Professional with more than 6 years experience covering construction, mining, manufacturing and petrochemical.

13+ years of multi-industry experience, master’s degree in engineering, Certified Safety Professional, experienced in system safety and risk assessment, author of technical papers, effective report writing; bilingual, multi-tasking, self-directed, computer literate, analytical

Gas turbine performance, turbomachinery design, CFD, CFX, MS Excel, AutoCAD 2007, MATLAB, Unigraphics, UNIX, LINUX, Gas turbine simulation and diagnostics, Aerodynamics of compressors

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out