Resume - To lead a team involved in the drilling activities of a growth oriented oil and...

Misco Jobs

Resume #2337

CONTACT INFORMATION:
View contact information...

Objective

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Educational Qualifications

M.Sc. (Offshore Engineering): The Robert Gordon University
Sept. 1997 - Dec 1998 Aberdeen, United Kingdom
(Majoring in Petroleum and Drilling Technology)

Graduate Thesis:
Industrial project with Environment and Resource Technology Limited,
(Aberdeen, UK) in the area of Casing While Drilling (CWD) techniques.

* Identified the various CWD techniques that were already adopted and those that were still being researched in the industry. This involved extensive study and analysis of literature and discussions with senior well engineering personnel in companies like Shell Research Technical
Services, Chevron, Tesco Corporation, Baker Hughes Inteq and with
Research consortia like RF Rogaland Research (Norway) and Ocean Drilling
Program (ODP), Texas, USA.
* Made a comparative study of conventional drilling and CWD techniques and concluded that the use of latter reduces the cost and time for drilling a well by about 30%.
* Conducted extensive research and study on Expandable Casings
(Expandable Slotted Tubular, Alternative Borehole Liner and Expandable
Sand Screen). This was useful in collecting information about the reason for using expandable casings, types of well where expandable casing was used, casing length and the advantages of using expandables over conventional casing techniques. In this regard, coordinated with Shell,
UK and Petroline Well System, UK. This study was about a wide variety of wells that were drilled in Shell field (in the UK Continental Shelf).

B.E. (Mechanical Engineering): Kuvempu University
Aug 1991 - Nov 1995 Karnataka, India

Senior Project: Energy conservation in centrifugal pumps A study on pressure drops in pipelines. Worked as a team member and could effectively communicate with other members in order to meet the technical requirements and project deadline.

Work Experience

1. Technical Coordinator
Weatherford Inc.,
Under Balanced Drilling (UBD) - Middle East
Abu Dhabi, UAE
Period: May 2000 - Nov 2001

* Prepared final job report for each UBD job by collating various field reports from field operations personnel.
* Modified and enhanced the UBD operators manual for Middle East operations.
* Task scheduling for field personnel based in Abu Dhabi, UAE.
* Creation of technical reports for new projects including technical drawings using AutoCAD.
* Maintain database about number of jobs and revenue generated for each
UBD job on a monthly basis.
* Maintain daily drilling reports and all other UBD activities.

2. Consultant, Production/Well Engineering department
Shell Petroleum Development Corporation (SPDC)
Warri, Nigeria
January 1999 to March 2000

Involved in the following activities:
* Training programs and conducting workshops for the Graduate Trainee
Engineers of SPDC in the area of Production / Well
Engineering. Topics included Multiphase Flow in Pipes, Well
Completion, Drilling and Well control and Reservoir Management.
* Well planning and design.
* Application of integrated technologies involved in the completion of a well.
* Reservoir management techniques to design completions for the effective depletion of a reservoir.
* Suggest and implement modern techniques involved in drilling and well control.
* Site technical review of drilling, completion, and stimulation of production facilities in onshore operations.

3. Service/Projects Engineer
Fluid Control Equipments
Anna Salai, Chennai
Period: Jan 1996 - May 1997

* Coordinate and attend to various service calls throughout the country for the company's equipment (Filter Press) used for solid-liquid separation.
* Implemented the detailed drawings (2 and 3 dimensional) of Filter
Press (using AutoCAD Rel.13) to provide easy access to technical drawings of various specifications.
* Involved in project initiation and follow up with different clients for increased business activity for the company.
* Played a key role in site technical review, erection, testing and commissioning of Filter Press at various client sites throughout
India.
* Coordinated production activities in the manufacturing yard/factory for timely delivery of the equipments to the clients

Professional Membership

* American Society of Mechanical Engineers (ASME)
* Society of Petroleum Engineers (SPE)
* Institute of Petroleum, London (IP)

Computer Skills

* Hands on working experience of AutoCAD.
* Basic understanding of Oracle and Visual Basic.
* Working knowledge of MS Office and its applications.
* Knowledge of C and C++.
* Underwent H2S and Breathing Apparatus Course in GTSC, Abu Dhabi.
References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5301 to 5350 of 10916)

Go to Search Parameters...

Brief Description

Attended a workshop on Modern Well Log Data Interpretation from 25th to 30th February-2008 • Exposed to different well logging tools at Schlumberger Company, Mumbai, in Feb-2008 • An overview of seismic data processing and Interpretation in SPIC, ONGC Ltd., Nov-2007 • Observation of different Stru

Ballast Control Operator , Watchstander , Barge Engineer

MBA Finance. Procurement & Supply Chain expert with over 14 years of experience and a strong knowledge of inventory, logistics, imports and exports. Proven capabilities in project management, business analysis, problem solving and negotiating. Fluent in English & Spanish.

My background is Drilling Engineer and I have a first experience as drilling supervisor, so I want to build my career in the world of drilling.

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Working as senior telecommunications technician for a big gas company.

Implementation Manager or Technical Project Manager

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Combined experience in design and construction

Graduated in computer science subject

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

Diploma in Electrical and Electronics Engineering ¡V 3 Years

I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.

Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.

Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design

I am an highly versatile and enthusiastic individual. Self motivated with a confident, friendly and sociable personality.I'm a supportive team member who also works well on own initiative.I am able to work under pressure and prioritise heavy workloads.

Piping design an stress analysis

December 2008 graduate of Texas A&M University with a degree in Petroleum Engineering. I am seeking full time employment as a Petroleum Engineer in the oil and gas industry. Please find my resume attached to this email, I look forward to speaking wit

ABILITY TO DRAW AND INTERPRET ENGINEERING DRAWING

Corrosion/ Material/ Metallurgical/ QA/QC Engineer

To contribute to my Organization's success through the use of effective customer,managerial and people skill.To serve reputable Organizations with an undying passion for excellence and creativity.

Heavy duty mechanic

Oil and Gas Equipment supply

Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.

First Prev 101 102 103 104 105 106 [ 107 ] 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out