Resume - Experienced, commercially and technically aware Project / Construction Manager -...

Misco Jobs

Resume #23934

CONTACT INFORMATION:
View contact information...

EDUCATION:
University degree in civil engineering (M.S.), Bachelor degree in Economics

LANGUAGES English, German, French, Dutch and Portuguese

AREAS OF EXPERTISE
(1) Management of projects covering Design, procurement, fabrication, construction, installation, hook up and commissioning for projects involving:

(2) CALM buoys and Offshore terminals (refer to Sungai Udang, Sirte Oil, Cilacap, Upper Zakum, Girassol(deep water buoy), Erha (deepwater buoy), Ash Shirh terminal projects)

(3) FPSO's (refer to MISC FPSO, Espoir field development, Girassol and Rospo Mare projects), including topsides.

(4) Pipelines (refer to SHG, I-MNTW,SHW field development projects, Upper Zakum Main Oil Line & Loading lines, IPC-Heera trunk line project)

(5) Onshore pipelines and pump stations (refer to extension of Indian Oil terminal at Salaya and Sungai Udang projects)

(6) Jackets and decks (refer to SHG and I-MNTW projects)

(7) Hook up works (refer to SHG,I-MNTW,SHW, upgrading of BPB and wellhead platforms in Bombay high field)

In depth knowledge of contractual terms and conditions, keen commercial negociator.

Computer skills Extensive programming experience in C, FORTRAN, and Visual Basic languages.
Enthusiastic PC user, fully conversant with the use of word processing, spreadsheet, scheduling and data base software. Fully conversant with drafting programs such as AutoCad 2004, Microstation, Primavera planning package.

PROFESSIONAL EXPERIENCE
2004 September - present Pegasus Inc.
Position: Client representative
Responsibilities:
Management/Supervision of offshore pipeline installation contract on client's behalf (temporary replacement for incumbent)
Installation of Ashdod to Hadera pipeline with related onshore tie in works, offshore Israel, client Israel Electric Corporation Ltd.

The project encompasses the installation of a 30 inch pipeline, parallel to the coastline between the cities of Ashdod and Hadera, with landfall and tie-ins at 5 locations. Personal responsibilities covered interactions with authorities to secure permits for the works, coordination of IEC's (Israel Electric Corporation Ltd = Owner ) supplies with offshore works. Day to day coordination of works with the various parties involved, supervision of pipe-lay contractor.

2003- 2004 Stolt Offshore Services S.A.
Position: Deputy Project Manager
Responsibilies:
Management from engineering through field installation, including subcontract and vendor management of FPSO mooring and deep water offloading system.

PROJECTS
Erha Field, offshore Nigeria, client Exxon Mobil Exploration and Production Nigeria Ltd.
The project comprises the design, procurement, fabrication of suction mooring piles for FPSO anchoring system, CALM buoy deep water buoy providing support for off offloading lines, capable to transfer 4200 BOPH. The offloading buoy will be the largest buoy ever fabricated. Design phase was completed April 2004, fabrication started February 2004,

2002--2003 Intec Engineering SEA Sdn Bhd
Position: Construction Manager
Responsibilities:
Management of all aspects of the works performed by shipyard, topside fabricator and bow turret designer and fabricator. Starting with contract negotiations with shipyard, coordination of day to day works, interface management with contractors and suppliers. Project schedule and cost control

Projects
Conversion of MT "Bunga Kertas" to FPSO –Penara & North Lukut field, offshore Peninsular Malaysia- Malaysian International Shipping Corporation.

2001- 2002 Canadian Nexen Inc.
Position: Project Manager
Responsibilities
Management of all works related to the installation of second buoy and associated pipeline at Nexen's Ash Shihr Export Terminal. Starting project definition, budgeting followed by preparation of tender document, evaluation and contract award.

Projects
Second loading buoy and associated pipelines at Ash Shihr Export Terminal –Offshore Yemen-Canadian Nexen Petroleum Inc.

2000- 2001 Prosafe Production Pte Ltd (company formerly called Nortrans Offshore Pte Ltd. before take over early 2001)

Position: Project Manager

Responsibilities
Management of all activities related to a FPSO conversion project, covering the design, procurement & fabrication of all equipments, components for a floating production system. including its installation. Interface with client, supervision & coordination of design activities performed in house and by outside consultants, subcontractor and vendor supervision and inspection. Responsible for performance of all project activities within the budget, and in accordance with project schedule.

Projects
FPSO for Espoir field development – Espoir field offshore Ivory Coast – Client Ranger oil Cote D'Ivoire SARL – Processing capacity 45,000 BCPD and 40 MMSCF of gas per day

1998-2000 MPG – Mar Profundo Girasol – joint venture between Buoygues Offshore and Mc Dermott ETPM (Stolt Offshore)

Position: Project Manager loading buoy and FPSO mooring

Responsibilities
Management of all project activities related to the design, fabrication, transportation of an offloading system and installation of loading buoy & FPSO, both located in 1400 m water depth. Coordination and supervision of in house design work on loading lines and their interface with the loading buoy & FPSO. Contract negotiation, approval of design, site supervision and quality control of the works undertaken by the buoy manufacturer. Profit and loss responsibility for this part of the project. Emphasis was on the technically challenging aspects buoy project, the CALM buoy in the world's deepest waters, and the commercial complicated nature of this state of the art project. For the FPSO mooring system activities covered the design, procurement of the different components, and integration of these in the floater's hull. Development of detailed procedures for installation of both mooring buoy and FPSO on location.

Projects
FPSO laid out to process 200'000.-BOPD & Installation of a loading buoy and associated export lines, capable to receive 400'000 dwt tankers at MPG location offshore Angola, client Elf Exploration Angola

1997-1998 Intec Engineering, Houston, USA

Position: Construction Manager

Responsibilities

Overall management of Construction projects undertaken by Intec's regional office in Kuala Lumpur, Malaysia. Duties covered the overall coordination of the works design review & approval, contract negotiation, supervision and quality control of procurement activities and subcontracts, progress assessment, payment control, interfacing with client on a day to day basis and by formal presentation to client's board of directors. This position required a wide hands-on experience in contractual and technical matters. Training and education of local staff was part of the assigned responsibilities. Preparation of bid packages and pricing of new projects.

Projects
Installation of SPM system for 350'000 Dwt tankers at Sungai Udang (Melaka), client MRC, management of EPC contract

1995-1997 Company: GAL Offshore Services limited. Bombay, India

Position: General Manager/vice president Construction

Responsibilities
Set up from grass roots of offshore construction department Execution of all offshore works undertaken by the company.

Projects
My duties with this company started with setting up an offshore construction department to perform all activities from price preparation, commercial negotiations with client, project execution, till financial phase out of the project. Recently the company has merged with Great Eastern Shipping Company.

Installation of three replacement pipelines in the Dorood field, client Oceaneering, Owner, National Iranian Oil Company (NIOC),Location Kharg Island, Arabian Gulf

Upgrading of BPA-BPB platform's, subcontractor to Essar Oil Limited, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

SHG remedial works, subcontractor to Daewooo shipbuilding and heavy Industries, Korea,, Owner, Oil and Natural Gas Corporation, Location Bombay High field, offshore India

Upgrading of wellhead platforms in Bombay High field. Subcontractor to Mazagon Docks,, Owner, Oil and Natural Gas Corporation, Location Bassein field, offshore India.

1991 - 1995 Company: National Petroleum Construction Company Abu Dhabi, United Arab Emirates

Position: Deputy Project Manager

Responsibilities
Overall project management responsibility for major Offshore Installation and Hook up Works for jackets and pipelines.

Projects
SHG Process complex client Oil and Natural Gas Commission, location Bombay High Field offshore India

The contract for these works was placed with a consortium formed between Daewoo Shipbuilding of South Korea, responsible for fabrication works, and N.P.C.C., covering all the offshore installation works. NPCC's scope of work included the installation in the Bombay High Field of the SHG platform, comprising a 8 legged jacket (weight 5500 mt), with 4 main piles and 16 skirt piles, and topsides(6 compressor modules and generator cum living quarters packages) and associated modification works on remote platforms, and laying of the related pipelines. Project management of all works involving daily management of in house departments, consultants, suppliers and subcontractors, for design, transportation, installation testing and commissioning of the platform and of 188 km of pipelines with diameters 10 through 28 inches, co¬ordination of procurement activities, interface with client and consultants, supervision of subcontractors. The contract value of 120 million US $, represented 50 percent of the yearly turnover of the company. Hook up works included modification works at 18 platforms in addition to the SHG decks. During the installation phase I was heading the Bombay based site office, with full responsibilities for client contacts, operational and logistic management of 4 installation barges spreads executing simultaneously the field works. An This project was completed on time on 31/04/1994 and within the budget.

l-MNTW infill platform project, subcontractor to Larsen and Toubro, Owner, Oil and Natural Gas commission, Location Bombay high field, offshore India

This project was run simultaneously with the SHG project described above. My personal tasks during this project were the same as for the SHG project. The project involved the installation of 4 wellhead Platforms (each 4 legged jackets, with 4 main piles and 4 skirt piles) and their topsides (one main deck and one helicopter deck) and a combined length of 78 km of pipelines in sizes ranging from 4 though 16 inches. This project was timely completed on 28/03/1994.

SHW project, Subcontractor to Daewoo Shipbuilding, Owner, Oil and Natural Gas Commission, location Bombay High Field offshore India.

Personal responsibilities were the same as described for the SHG & I-MNTW Projects. This Project consists of the installation of water injection platform and topsides, together with the laying of 16 km of pipelines of diameter. The scope of work covered by N.P.C.C. was launching, upending and setting of the jacket (weight 4500 mt) and it's associated deck. The scope of work for pipelines consisted of design, supply, coat and wrap, transportation, laying, testing and commissioning.

IPC-Heera trunk line, Client Oil and Natural Gas Commission, Location Bombay High & Heera Field, offshore India.

Installation of 120 km long 30 inch pipeline between the ICP and Heera platforms, with 5 laterals (branching),and 18 km long 22 inch branch line to the SHP platform. The water depth along the pipeline varies from 50 to 80 m. The pipeline is trenched to a cover of 1.2 M. Contractual sum was 60 mil US $.

1985– 1990

Company: Single Buoy Moorings, Monaco

Position: Manager Installation Department
Responsibilities:
Preparation of detailed procedures for installation Mooring Buoys, Floating Production Units, including loading lines and intra field pipelines. Development of Bid Packages for Installation Works, negotiation of contracts for execution of same. Monitoring of execution of offshore works, end of contract settlement and claim negotiation.

Projects
Installation of Mooring Buoy including Design, Procurement and Offshore pulling of 32 inch deballast line, Client Sumed, Location Sidi Kerir (Alexandria) Egypt

This project was carried out in co-operation with a local contractor, the technical emphasis was on the development of simplified techniques for survey and execution of the installation works(pipeline pulling, and trenching, buoy installation works with locally available barge). The project involved

The design and testing of a purpose built trenching machine that was to be used for post trenching the pipeline in the shore approach area.

Installation of spread mooring with a LPG loading line and associated vapor return line, client ENPPI location Red sea, Egypt.

Design and construction of 8 and 6 inch lines. The concrete coated pipelines were simultaneously pulled from onshore make up site to sea., with PLEM attached. The spread mooring consisted of four buoys, tied to the seabed by anchors. The contract included the installation of land lines (10 km) connecting the terminal to the onshore facilities.

Repair of 1O inch oil line at Ekpe platform client Mobil Oil Nigeria, location offshore Nigeria

Procedures and project management (including hands on offshore management of construction works) for repair of a 10 inch pipeline at Mobil's Ekpe platform The repair was carried out from a dynamic positioned diving vessel that was used to lift the pipeline to the surface where the tie in was made. During these works extensive use was made of ROV's to perform most of the subsea works.

Repair of a 6 and 8 inch pipeline, client ELF, location offshore Gabon.

Procedures and project management for repair of a 6 and 8 inch pipeline, including a study to install a lay ramp for small diameter pipelines on board of a dynamic positioned diving support vessel.

Installation SBM and 48 inch loading line at Sirte oil terminal, client Sirte oil Cy, Offshore the Libyan coast.

Design, fabrication and construction of a 48 inch loading line, installed by beach to sea pull using a subsea installed linear winch

Installation of 3O kV electrical cable at Djeno terminal client Elf Congo, location offshore Congo

Project management for installation of 30 km long electrical cable between an offshore platform and the onshore oil terminal.

Fabrication and installation of SBM, with associated extension of 42 inch oil line at ADCO oil terminal, client ADCO oil Cy, location offshore Abu Dhabi

Project management for design and construction phase of pipeline extension at ADCO's Abu Dhabi oil terminal, including the re-use of existing pipe supports and combined pipe cum plem installation from a lay barge.

1981 - 1985 Company Bouygues Offshore, Paris, France

Position: Project Manager Offshore projects

Responsibilities:
covered all aspects related to offshore contracting such as preparation of bids, design engineering, development of installation methods, follow up during execution of the works. Technical aspects included for platforms: jacket launching, upending and pile driving ;for pipelines: design (hydraulic, stability, weight coating design), detailed procedures for pipe laying riser installation, specification for all materials and services required for the project. Client relations from bid till claim settlement stage.

Projects
Installation of jacket, topsides and associated flow lines for process platforms in the Kambala and Takula fields, Client Gulf Oil Co., location offshore Cabinda.(West Africa)

Project management of the outfitting of lay ramp on the BOS 400 barge

1978 - 1981 Company: R.J. Brown and Associates Rijswijk, The Netherlands

Position: Project Engineer

Responsibilities:
Design of pipeline systems and supervision of construction activities on sealine installation works

Projects
Development of the Upper Zakum field, Client ADNOC, location Arabian Gulf offshore Abu Dhabi
48 inch pipeline across the Firth of Forth, client British Gas, location Scotland

24 inch gas line from North Rankin platform to Dampier client Woodside Petroleum Offshore Western Australia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 10106)

Go to Search Parameters...

Brief Description

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Chemical engineer with 16 years of operations and process experience in a refinery.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

A highly adaptable and meticulous Rotating Equipment Engineer with hands on experience on Centrifugal and reciprocating compressors, Steam turbines, Gas turbine, Pumps, Agitators, Fans and Blowers, Mechanical seals, Gas seals and Vibration analysis.

7 years in refining admin. and 8 years of oil well service

Contracts Specialist ~ Planning & Strategic source specialist

19 years experience in Design and Detailing, Drafting & Estimation of Structures to Offshore, Oil and Gas, Petrochemical Industries, Power, Plants, Cement Plants, Steel Plants and Commercial Industries utilizing AutoCAD, StruCAD, PDS, PDMS and MicroStation CADD packages.

Senior Geologist 16+ years experience, small and large companies, exploration, A&D member of professional body.

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

Experienced, commercially and technically aware Project / Construction Manager - Director. EPC project experienced for works up to 500 mil USD. Specialised in projects involving FPSO, offshore terminals (shallow and deep water), pipelines, platform fabrication, hook up and installation.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Canadian citizen, Bilingual, with long experience in project scheduling, cost control. Strong knowledge of the scheduling techniques and related computerized programs such as Primavera Project Manager (P3, P3e and P3e/C), Ms Project and MS Office.

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

A highly effective Senior Manager, who meets challenges directly, creates positive change and motivates teams to exceed goals. Proven record of success setting strategic direction, creating and executing solid asset management plans, improving operations and increasing profitability.

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Sr. Piping Designer - CadWorx/AutoPlant

About 11 Years Experiece working in the Oil and Gas Sector as Document Controller/Turnover Document Controller/Turnover Engineer. I have worked for some of the reputed multinational Constrcution Companies like Chiyoda, Foster Wheeler and Toyo.

QHSE Manager having 13 years on IMS Implementation and certifications , have been worked in a multinationals companies like Weatherford and DSD

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

Occupational Health Specialist / Emergency Medical Doctor / Physician

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

city and guilds ,years ,1,2,3 . advance craft , higher national

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Analyzer and Instrument Technician, with significant experience through training and certification

I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections

SAP Program/Project Manager with multimillion dollar projects in Asia Pacific & Europe

Senior Real Estate Paralegal

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

Project Management / Design & Engineering

Management, Soft Skills, Business, Leadership Training. Negotiation Skills, Communications Skills and Computer Skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out