Resume - Mechanical engineer with fourteen years of international experience in engineeri...

Misco Jobs

Resume #23968

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

SENIOR MECHANICAL ENGINEER 2005 - present
WORLEY PARSONS MEG, EPC Company, Calgary, Canada

Heavy Oil Project-Cristina Lake Phase 2B–Client MEG Energy
35,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – design and construction of Central Process Facility
* Responsible for commercial tenders and bid evaluations
* Preparing supporting commercial and technical tender documents for Dehydrators, Pressure Vessels, Steam Separators, Filters
* Developing of design datasheets and technical specifications
* Preparing requisitions for quotation, bid evaluations and requisitions for purchase order
* Reviewing Vendor's calculations, drawings, fabrication procedures
* Inspecting during production in Vendor's shops
* Pressure Vessel Design, ASME VIII Div 1 Calculations

Heavy Oil Project-Client North American Oil Sands Corporation (STATOIL)
10,000 BPD Commercial Demonstration Plant - Phase 1, SAGD – design of pipeline network and Central Process Facility
* Preparing supporting commercial and technical tender documents for Static Equipment (Dehydrators, Pressure Vessels, Slop Treater, Separators, Filters)
* Developing of design datasheets and technical specifications
* Preparing requisitions for quotation, bid evaluations and requisitions for purchase order
* Participating on model review
* Reviewing Vendor's calculations, drawings, fabrication procedures
* Inspecting during production in Vendor's shops
* Pressure Vessel Design, ASME VIII Div 1 Calculations

Heavy Oil Project-Cristina Lake Phase 2–Client MEG Energy
23,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – development and design of pipeline network and Central Process Facility
* Preparing technical tenders
* Responsible for commercial tender documents review and evaluation
* Identifying suitable equipment supply vendors and providing information packages to obtain prices to support bid evaluation
* Developing manufacturing concepts and selecting, purchasing and expediting components that meet the project expectations, specifications, budgets and schedules.
* Preparing supporting commercial and technical documents for Oil Dehydrators, Heater Treaters, Free Water Knock Outs, Steam Separators, Drums, Scrubbers, Heat Exchangers, Filters
* Maintain accurate and strict control of project documentation, budgetary and firm cost estimates
* Ensuring that project documentation and related reference information is provided to the Engineering Manager and that the project successes and failures are documented so that future designs can be standardized and improved.
* Pressure Vessel Design, ASME VIII Div 1 Calculations
* Reviewing Vendor's design, stress analysis

MECHANICAL ENGINEER 2004 - 2005
ACRES PARSONS E&C, EPC Company, Calgary, Canada

Heavy Oil Project-MacKay River 2–Client PETRO CANADA
40,000 BPD Commercial Plant, Steam Assisted Gravity Drainage - Conceptual engineering and cost study
* Preparing design technical specifications for Dehydrators, Steam Separators, Tanks, S&T Exchangers
* Identifying suitable equipment vendors and preparing requisition packages to obtain budget prices
* Reviewing and clarifying bids
* Preparing technical and commercial evaluations and reviewing them with client

Heavy Oil Project-Surmont Phase 1-Client CONOCO PHILLIPS
25,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – development and design of pipeline network and Central Process Facility
* Preparing technical tenders
* Developing of design datasheets and technical specifications for specific equipment.
* Preparing supporting commercial tender documents for Treaters, Free Water Knock Outs, Pressure Vessels, Steam Separators, Tanks, S&T Exchangers, Scrubbers, Centrifugal Pumps and other packages
* Identifying suitable equipment supply vendors and providing information packages to obtain prices to support bid evaluation
* Reviewing technical and commercial evaluation with Client
* Preparing requisitions for purchase
* Inspecting during production in Vendor's shops
* Reviewing Vendor's calculations and drawings
* Pressure Vessel Design, ASME VIII Div 1 Calculations (COMPRESS)
* Shell & Tube Exchanger Design TEMA

MECHANICAL ENGINEER 2001 - 2003
MAXFIELD, Manufacturing Company, Crossfield, Alberta, Canada

Refinery expansion project, Regina – COOP
* 2001-2002 - Engineering and Design of Process Towers and different Pressure Vessels for the CO-OP Refinery in Regina
* Pressure Vessel cost estimate

Refinery expansion project, Burnaby – CHEVRON-TEXACO
* 2003-2004 - Engineering and Design of Process Towers for the Expansion of the Chevron Refinery in Burnaby

Other duties and responsibilities
* Responsibility for the development and implementation of engineering solutions for assigned engineering projects to meet customer specifications
* Pressure Vessels design, ASME VIII Div 1 (COMPRESS )
* Pressure Vessel cost estimate
* Designing and fabrication of LPG & CO2 Storage vessels, Custom process vessels, Production testing vessels, Flare knock out drums, Process columns and towers, Ammonia storage vessels
* Designing and fabrication of Process piping, Vaporizer packages, Pump and Compressor packages, Large diameter pipeS
* FEA stress analysis (ALGOR)
* Contacting the Clients to clarify technical information and specifications
* Following the productions process in the shop; changing and revising drawings, etc

MECHANICAL ENGINEER 1998 - 2001
HOFFMANN, Manufacturing Company, Slovakia / Germany

* Responsible for leading a project design team from early conceptual design through detail design, integration and test
* Estimating and maintaining effective control of project and product cost
* Clarifying technical information with client
* Designing heavy structural components, pressure vessels, tank trailers, semi trailers, B-trains
* Performing stress analysis, FEA
* 1999/2000 - Engineering supervisor in cooperation project with BELAZ in Belarus

MECHANICAL ENGINEER 1994 - 1998
GMV, Manufacturing Company, Slovakia

* Mechanical design related to new product development and product modification (Semi Trailers and Ship Containers)
* Reviewing and approving product drawings, drawing release packages, and drawing revisions
* CAD system administration - ACAD, SOLID EDGE
* Performing stress analysis, FEA
* Responsible for leading a project design team
* 1997- in charge of introducing systems of quality control ISO 9001 for the technical department

EDUCATION

MASTER'S DEGREE IN MECHANICAL ENGINEERING–
Technical University, Kosice, Slovakia 1987 - 1992
* Faculty of Mechanical Engineering
* Thesis Topic – Machines and Engineering Production Devices
* State examinations – Essentials of Construction of Production Machines, Elasticity and Strength of materials, Stress analysis, Mechanical and Automated Production Machines

TECHNICAL SKILLS SUMMARY

* Strong work ethic, reliable and honest, flexible and adaptable in team working as well as individually
* Registered as Professional Engineer of Alberta (APEGGA)
* Ability to work under time constraints and to adapt to change
* Working knowledge of manufacturing and assembly process
* Extensive shop experience
* Vendor package data reviews
* PFDs / P&IDs review
* Technical and commercial evaluation
* Management and quality control ISO 9001
* Design software - SOLID EDGE, INVENTOR, ACAD, MECHANICAL
* FEA stress analysis - ALGOR
* Design and stress analysis - COMPRESS (Pressure Vessels)
* Languages: Slovak, English, Russian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 9905)

Go to Search Parameters...

Brief Description

Process Operations Superintendent

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Experienced In Construction & Commissioning Of Oil & Gas/ Petrochemical/ Refinery/ Fertilizer And Power Projects Both In Offshore & Onshore.

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

A highly adaptable and meticulous Rotating Equipment Engineer with hands on experience on Centrifugal and reciprocating compressors, Steam turbines, Gas turbine, Pumps, Agitators, Fans and Blowers, Mechanical seals, Gas seals and Vibration analysis.

7 years in refining admin. and 8 years of oil well service

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

Experienced, commercially and technically aware Project / Construction Manager - Director. EPC project experienced for works up to 500 mil USD. Specialised in projects involving FPSO, offshore terminals (shallow and deep water), pipelines, platform fabrication, hook up and installation.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Canadian citizen, Bilingual, with long experience in project scheduling, cost control. Strong knowledge of the scheduling techniques and related computerized programs such as Primavera Project Manager (P3, P3e and P3e/C), Ms Project and MS Office.

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

A highly effective Senior Manager, who meets challenges directly, creates positive change and motivates teams to exceed goals. Proven record of success setting strategic direction, creating and executing solid asset management plans, improving operations and increasing profitability.

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Sr. Piping Designer - CadWorx/AutoPlant

About 11 Years Experiece working in the Oil and Gas Sector as Document Controller/Turnover Document Controller/Turnover Engineer. I have worked for some of the reputed multinational Constrcution Companies like Chiyoda, Foster Wheeler and Toyo.

QHSE Manager having 13 years on IMS Implementation and certifications , have been worked in a multinationals companies like Weatherford and DSD

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

Occupational Health Specialist / Emergency Medical Doctor / Physician

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

city and guilds ,years ,1,2,3 . advance craft , higher national

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Analyzer and Instrument Technician, with significant experience through training and certification

I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections

SAP Program/Project Manager with multimillion dollar projects in Asia Pacific & Europe

Senior Real Estate Paralegal

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out