Resume - Senior piping designer

Misco Jobs

Resume #24048

CONTACT INFORMATION:
View contact information...

TITLE Senior Piping Designer / Checker
Field Piping Engineer

SOFTWARE Pds V7.02
Autoplant V3
Autocad 2002 / 2004
Microstation J / V8
Pdms/Draft
Omni Pipe / Omni Iso

ADDITIONAL EXPERIENCE
Project Coordinator
Hydrotesting Co-Ordinator
Structural Detail Draftsman

QUALIFICATIONS
Civil Engineering Certificate

LANGUAGE
Fluent Italian (Spoken/Written)
(Other Than English)

Work Experience At A Glance

Worley Parsons Senior Pds Piping/Mech
Checker Current

Clough Engineering Senior Piping Designer Onshore
Piping Checker (12 Months)

Japan Vietnam Senior Piping Designer Onshore
Petroleum Co. (Jvpc) Field Piping Engineer (12 Months)
(Batam Island, Indonesia)

Worley Engineering Senior Piping Designer Offshore
(6 Months)

Bexton/Wood Senior Piping Designer/ On/Offshore
Checker (15 Months)
Field Piping Engineer

Bhp Pty.Ltd. Senior Piping Designer Onshore
(3 Months)

Worley Engineering Senior Piping Designer Offshore
(6 Months)

Transfield/Worley Senior Piping Designer/ On/Offshore
Checker (30 Months)

Brown & Root Senior Piping Designer/ On/Offshore
Engineering Checker (17 Months)

Bp Refinery Refinery Designer Onshore
Kwinana (20 Months)

Shedden Pacific Refinery Designer Onshore
Pty Ltd (7 Months)

Worley Engineering Piping Designer Offshore
(12 Months)

Woodside Offshore Piping Design Draftsman Offshore
Petroleum (13 Months)

Saipem Wa Field Piping Engineer Onshore
(6 Months)

Press/Clough J.V. Piping Design Draftsman Offshore
(11 Months)

Worley Engineering Piping Design Draftsman Onshore
(4 Months)

Davy Mckee/ Piping Design Draftsman Offshore
Mcdermott J.V. (9 Months)

Ept-Fochi J.V. Field Piping Engineer/ Onshore Construction/ (17 Months)
Hydrotesting

WORK EXPERIENCE
WORLEY PARSONS PTY. LTD. JANUARY 2005 – CURRENT
Senior PDS Piping/Mechanical Checker
Project: Development Capital Projects for Worsley Alumina Pty. Ltd.
Checking of all new and existing mechanical equipment modelling

CLOUGH ENGINEERING JANUARY 2004 – JANUARY 2005
Piping Checker (Microstation J)
Project: Moulavi Bazar Gas plant for Unocal Bangladesh
Checking of piping general arrangements, layout of vendor equipment.
Checking of isometrics and pipe supports.
Senior Piping Designer / Checker (Autocad 2004)
Project: Telfer Gold for Simon Engineering Australia
Checking of piping drawings and isometrics.

G.H.D. PTY. LTD. (OIL&GAS) SEPT 2004 – NOV 2004
Senior Piping Designer (Microstation J)
Project: Alinta Co-Generation Unit 1 Pinjarra
Gas Metering compound – design of Venturi and Ultrasonic Skids
Compressor Area – design and layout of fuel gas booster compressor c/w pipework and supports.

JAPAN VIETNAM PETROLEUM CO. DEC 2002 – DEC 2003
Senior Piping Designer (AUTOPLANT V2 – AUTOCAD2002)
Field Piping Engineer – J.R. McDermott Fabrication Yard Batam Island, INDONESIA
Project: Rang Dong Field Development for JVPC
SITE: Piping design and 3D modelling of all modifications due to clashes, design changes and additions as required ie. extension to water injection pipeline.
Providing technical support to discipline engineers, commissioning engineers and inspectors. Involved in the review and punchlisting of hydrotest packs and completion of 3D model.

WORLEY JUNE 2002 – DEC 2002
Senior Piping Designer (AUTOPLANT V2 – AUTOCAD2000i)
Project: Rang Dong Platform for JVPC
Piping design on water injection and compression platform.

BEXTON/WOOD APRIL 2001 – JUNE 2002
Senior Piping Designer/Checker (AUTOPLANT V2 – AUTOCAD2000i)
Project: HJV Liquids Handling for Apache Energy - Varanus Island.
Phase 1 – First Oil. Following a brief layout/feed study, an intense fast track program began where I designed the production header pipework area, two
1st stage Separators c/w adjoining skid, piperack, etc. Have now completed Phase 2
where I have been working as a lead piper, coordinating with civils, structural, equipment and vessels, etc. - laying out the overheads compressor skids, downstream scrubber and seal gas skid equipment and pipework. Continuous site visits and constant interfacing with project supervisor.
At end of design phase, I was sent to Varanus Island as a field piping engineer to assist the client's supervisors with piping installation.

BHP PTY. LTD. JAN 2001 – MARCH 2001
Senior Piping Designer
Project: Hot Briquetting Iron plant – Port Hedland Operations
Phase 3 Mechanical Implementation
Mods to existing pipework in Reactor, Gas Generation and Beneficiation plants.

WORLEY ENGINEERING JUNE 2000 – DEC 2000
Senior Piping Designer (AUTOPLANT V1.5 – AUTOCAD R14)
Project: Phase 22 Wellhead Platforms for Unocal Thailand
Design mods. to 3D model, P&ID's, G.A.'s, Equipment drawings, Pipe support drawings and isometrics.

TRANSFIELD/WORLEY JAN 1998 – JUNE 2000
Senior Piping Designer on the COSSACK PIONEER FPSO Optimisation Team (CPOT)
(MICROSTATION 95 / OMNIPIPE 3D / OMNI ISO)
Conceptual layout and detail/design of:
-Firewater Upgrade, Main Pump Skid, engine room lift pump and associated piping/tankage
-Steam system debottlenecking
Weekly site visits over a five month period for site measuring/layout.
After CPOT, I was assigned to various piping design projects as a designer/checker on
Cossack Operations, Rankin A Platform and Onshore plant.

BROWN AND ROOT ENG. AUG 1996 – JAN 1998
Senior Piping Designer/Checker (MICROSTATION 95/PDMS)
Layout/Piping Design of various projects including:
- Tiwest chemical plant upgrade: Piping design for Unit 200 / Unit 300
- Wapet: Barrow Island / Station 'J' Flare Upgrade
- Wapet: Thevenard Island / checking of Saladin 'B' and 'C' Wellhead piping
- Petronas Carigali: 3D Modelling of Ruby 'A' Platform Wellhead piping (PDMS)
- Pogo Producing Co.: 3D Piping design/modelling for Benchamas Field
Wellhead Platform BWA pipework (PDMS)
Downloading of 2D G.A.'s from 3D Model (DRAFT)

BP REFINERY KWINANA DEC 1994 - AUG 1996
Senior Piping Designer/Shutdowns(AUTOCAD V14 / PROISO)
Layout/Piping Design of various projects including:
- CDU2 45tonne filter and associated pipework.
- Mods to HGO/LGO pumps, stripper piping and crude tower E-102 internals.
- Catalyst handling continuous unloading system for RCU
- LPG plant upgrade
Field Engineer assisting project engineers with various shutdowns duties incl. monitoring pipework installations and coordinating/assigning work to meet project schedules.
Gathering of QA/QC information for daily activity reports.

SHEDDEN PACIFIC PTY LTD JUNE 1994 - DEC 1994
Piping Design Draftsman (AUTOCAD V14 / CADPIPE)
Project: MOS Revamp 95 for BP Refinery
- Design of Crude Distillation Unit 1 pipework / Vessel Drawings / Isometrics

WORLEY ENGINEERING JUNE 1993 - JUNE 1994
Piping Designer (AUTOPLANT V1.2/AUTOCAD V13)
Project: Jakrawan Central Process Platform for Unocal Thailand
- Design of fuel gas skid / Vessel data sheets.
- Equipment plot plan layouts / Piping G.A.s and Isometrics

WOODSIDE OFFSHORE PETROLEUM MAY 1992 - JUNE 1993
Piping Design Draftsman (MICROSTATION V4) – Gas Plant Karratha/Rankin platform
- Offshore/onshore piping design work.
Field engineer overseeing various projects to quality control procedures and specifications.
Monitoring daily welding and preparation of hydrotesting packs.

SAIPEM WA OCT 1991 - MARCH 1992
Field Piping Engineer
Project: MOS 32 for Pritchard Corporation at BP Refinery
- Assisting Project Manager in establishing the site within the refinery
- Providing technical and engineering support / piping specs, standards & drawings
- Monitoring and checking daily piping installations / client interface
- Field Supervision / QA/QC implementation / Preparation of hydrotesting packs

PRESS/CLOUGH J.V. DEC 1990 - OCT 1991
Field Piping Design Draftsman
Project: Goodwyn 'A' Offshore Platform (construction phase - Module A & D)
- Pipe co-ordination and technical queries / Clash checking / Composite G.A.s

WORLEY ENGINEERING SEPT 1990 – DEC 1990
Piping Design Draftsman
Project: Goodwyn 'A' Offshore Platform (Drilling/derrick support modules)
-Layout of piping plans and sections/ Isometrics / pipe supports / design changes

DAVY McKEE/McDERMOTT JAN 1990 - SEPT 1990
Piping Design Draftsman
Project: Goodwyn 'A' Offshore Platform (design phase)
- Design and checking of wellhead, process and utilities modules pipework / pipe supports

UNITED CONSTRUCTION ENG. OCT 1989 - JAN 1990
Quantity Cost Estimator
Project: Eneabba Floating Concentrator
- Preliminary estimates of piping, mechanical and tankage packages

C & C DRAFTING MAY 1989 - OCT 1989
Senior Mechanical Detail Draftsman
Project: 6 M/t pa Expansion Project for Argyle Diamond
-Detailing of all chutes, hoppers and bins c/w liner plates

EPT-FOCHI JOINT VENTURE OCT 1987 - MAY 1989
Field Piping Engineer – Construction / Hydrotesting
Project: North West Shelf Gas Project/Train 1 mechanical erection/completion
- Monitoring/reporting of daily pipework installation and pipe supports
- Assisting QA/QC engineers with collating welding information.
- Liaising with client representatives in reference to daily progress
- Inspection/verification of installation of piping components to standards and specifications. Expediting of late deliveries.
- Preparation of test packs and co-ordination of hydrotest team
- Assisting with plant commissioning

EGLO ENGINEERING DEC 1986 - OCT 1987
Senior Detail Draftsman
Project: North West Shelf Gas Project - LNG Phase 2
- Piperacks steelwork detailing

CLOUGH ENGINEERING SEPT 1986 - DEC 1986
Senior Detail Draftsman
Project: BP Refinery (Kwinana) Modifications
- Detailing of ducting / furnace steelwork

WESTERN MINING CORPORATION JULY 1986 - SEPT 1986
Mechanical Design Draftsman
Project: Three Springs Talc Joint Venture
- Layout and design of mobile crushing plant and slewing conveyor

AMEC-OLYMPIC PTY LTD OCT 1985 - JULY 1986
Project Co-ordinator- Fabrication workshop
- Involved in oil and gas / mining projects, estimating, workshop supervising

WESTPLAN ENGINEERING JAN 1985 – SEPT 1985
Mechanical Detail Draftsman
Project: Argyle Diamond – Scrubbing & Screening Plant
- Detailing of conveyors and associated chutework

BOOTH & PARTNERS JULY 1984 - JAN 1985
Piping Design Draftsman
Project: Cockburn Cement plant upgrade
- Layout / design of piping plans / elevations and Isometrics
Project: SECWA – Esperance - P. & I. D.s for fuel-oil treatment plant

TRANSFIELD WA JUNE 1983 - JULY 1984
Mechanical Draftsman - Karratha
Project: North West Shelf Gas Project - Domgas Phase 1
- Preparation of hydrotesting packs
- NDT co-ordination and line punchlisting for contract 1516

IMPACT ENGINEERING JAN 1982 - MARCH 1983
Piping Detail Draftsman
Project: Worsley Alumina - Red Mud Filtration
- Detailing and checking of pipe supports Isometric

TRANSFIELD WA 1974 - 1982
WESTPLAN ENGINEERING
- Structural / Mechanical Detail drafting from trainee stage

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out