Resume - Electrical and electronics engineer with 24 year experience in a major fertilize...

Misco Jobs

Resume #24122

CONTACT INFORMATION:
View contact information...

O B J E C T I V E

To achieve a challenging position in the field of Electrical Engineering with a dynamic organization, which provides opportunities for growth, career development and knowledge enhancement.

P R O F I L E

Electrical and electronics engineer with 24-year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

E D U C A T I O N A L Q U A L I F I C A T I O N S

1. National Apprenticeship Certificate in Electrical trade from ministry of Labour
Government of India in 1979
.
2. Diploma in Electrical Engineering from Board of Technical Examinations
Kerala in 1984

3 Degree in Electrical and Electronics Engineering (B.Tech) from University of Calicut, Kerala, India in 2002

I. T. S K I L L S E T S

Packages: WordStar, Lotus 1-2-3, Quatrapro. MS Office
DBMS: Dbase, Fox-pro 2.5
Languages: Fortran, Pascal, Basic
Operating system: MS DOS, Windows 9X & 2000
Internet: IE / Netscape Navigator
Antivirus: Norton Antivirus / PC Cellin
E mail client: MS Out look / Express, Eudora

Present Employer: FACT Limited
Udyogamandal P.O., Cochin, Kerala, India.

D E T A I L S O F E X P E R I E N C E

More than 24 years of service in FACT. My career started as an Electrician in FACT Udyogamandal division from 20-6-1980 and then promoted as Junior Engineer
Electrical on 2/6/1987 and posted in FACT Petrochemical Division for its commissioning activities. Promoted as Engineer Electrical on 24-1-1996.
On 1-04-2000 promoted as Assistant Manager Maintenance and transferred to
Udyogamandal division. During these periods I have had maintenance and operation experience in all the electrical equipments in a chemical/petrochemical/fertilizer plant.

Assistant Manager Maintenance at the Udyogamandal Division of FACT( from 1/4/2000 onwards)

Working as an Assistant Manager Electrical Maintenance Reporting to the Manager Electrical Maintenance. I am responsible for the over all maintenance of the following including planning, procurement and inspection

110 KV sub station
Electrical equipments in Ammonia plant, Sulphuric acid plant,
Ammonium Sulphate plant, Naphtha storage etc.
Responsible for the electrical work shop
Repairing and maintenance of Electrical motor
Voltages 11000, 3300, 440, 230
Power rating from fractional KW to 2418 KW
Squirrel cage induction, Slip ring induction, Synchronous (HT),
Hazardous area classification Zone I &II gas group 1, 2A,2B & 2C T1 to T5
Repairing and maintenance of transformers
Voltage ratings
3.3 KV/400 V
11 KV/3.3 KV
110 KV/11 KV
Rating
100 KVA to 20 MVA
Corporate communication system
Trouble shooting of plant control circuits and interlocking circuits using PLCs
Contract administration
Achieved a manpower reduction of 40% without out sourcing
Have experience in the On Job training for Govt. of India apprentices

Engineer at Petrochemical division of FACT (from 24/1/1996 to 1/4/2000)

Have hands on experience in the maintenance of the following

110 KV sub station
AC sets, split, window package units
Electrical Equipments in our 50 MGD water treatment plant
Circuit breakers
OCBs
MOCBs
SF6 circuit breakers
Vacuum circuit breakers
Air Blast circuit breakers
Diesel Generators up to 500 KVA
Automatic main failure system
Electrical equipments with the following types of protection
Intrinsic safe
Flame proof enclosure
Increased safety
Oil immersed
Powder filled
Non Sparking
Repairing and maintenance of Electrical motor
Voltages 11000, 3300, 440, 230
Power rating from fractional KW to 2418 KW
Type Squirrel cage induction, Slip ring induction,
Synchronous (HT),
Hazardous area classification Zone I &II gas group 1, 2A,2B & 2C T1 to T5
Repairing and maintenance of transformers
Voltage ratings
3.3 KV/400 V
11 KV/3.3 KV
110 KV/11 KV
Rating
100 KVA to 20 MVA
Hazardous area lighting circuits
Electrical equipments in Ammonia plant, Tonnage oxygen plant,
Texaco oil gasification plant etc.
Conveyor system control circuits
UPSs up to 600KVA (2x300KVA)
Have experience in the On Job training for Govt. of India apprentices
Operation of 110 KV sub station
Succeeded in predictive bearing failure analysis using spm meter
Achieved 20% cost reduction in spares
Commissioning of Ammonia plant

Junior Engineer at Petrochemical division of FACT (from2/6/1987 to 24/1/1996)

Have experience in the erection/commissioning and maintenance of the following equipments in the Petrochemical division of FACT

Transformers up to 10 MVA
Motors HT and LT up to 750 KW Hazardous area classification Zone I &II
gas group 1, 2A,2B & 2C T1 to T5
Motor control centers and panel boards ? both HT and LT
Corporate communication system
Three 750 line digital exchanges with interconnection and level DID
facility to PSTN network
256 port C Dot exchange
Structured cabling for LAN network
Maintenance plant communication system
Loud speaking intercom with potential barrier suitable for Zone I
group II C (95 stations)
Pager system 25 stations 3 Nos.
Mini EPABX 401 - 125 Nos.
Mini EPABX 16 lines 4 Nos.
Cash award was given in appreciation of the commissioning works of petrochemical division
Operation of low pressure turbo alternator plant 1500 KVA
Maintenance of Diesel generators up to 500 KVA
Have experience in the On Job training for Govt. of India apprentices
Electrician at the Udyogamandal Division of FACT ( from 20/6/1980 to 2/6/1987)

Have experience in the maintenance of
Electric motors HT & LT up to 2000 KW
MCCs
Control circuit trouble shooting
Welding transformers and motor generators
Electric hand tools
Industrial and domestic wiring
Starters
DOL
Star DELTA
Auto transformer type
Reactor start
Starters of HT synchronous motors
Circuit breakers
Vacuum circuit breakers
OCBs
MOCBs
SF 6
ABCBs
Electrical equipments in Ammonia plant, Tonnage oxygen plant,
Texaco oil gasification plant etc.
Attended the commissioning of DCDA acid plant
Maintenance of lighting system in hazardous area
Conduit wiring, control wiring and trouble shooting.
Cable laying trough trays and termination ( both LT and HT)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 10903)

Go to Search Parameters...

Brief Description

Experienced Land/Right of Way Agent

petrololeum

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

HSE Executive

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

10 yrs in safety management

Chemical Laboratory Analyst / Chemical Process Technician.

Experienced rig medic

PROJECT ENGINEER / ROTATING ENGINEER / ELECTRICAL ENGINEER

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Technician with 9+ years of experience

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

A well-rounded production person having worked at all levels from production operator through control room lead tech to supervisor. Trained in all aspects of the oil and gas industry (well heads, 3-phase separation, compression, reciprocation, turbine, centrifugal, refrigeration, gas lift, gas injec

Well verse in blasting and painting for the past 20 years

Sutina is the Country Knowledge Manager for Deloitte Consulting Malaysia. She has 5 years knowledge management experience in the professional services environment. At present, she works extensively with the firm's intranet, soliciting and managing content, establishing guidelines and processes.

8+ years of experience in the field of IT with experience mainly in Customized Enterprise Planning Solutions (ERP), Business Process Management (BPM) and Management Information Systems (MIS). Wide experience of System Analysis, Project Management and Client handling.

I have 30 years experience working in Oilsands Upgraders as a control room operator and start-up and commissioning operator. I am currently working on expansion and growth plans of Suncor for their MNU Project. I work with Engineering houses to include operations input for operability and safety in

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

I'm a qualified Medical Graduate (MBBS) with almost 14 years of Clinical Work experience, mostly in the areas such as Emergency Medicine, Internal Medicine, Trauma, Tropical & Infectitious Diseases and Public Health.

25 years experience in IT industry, now specializing in J2EE, Service Oriented Architecture (SOA) and Radio Frequency ID (RFID) solution integration to Enterprise Information Systems (EIS). Willing to travel 100% worldwide.

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Has over 20 years experience in EPCM projects with extensive experience in purchasing, contract administration, cost estimating and production planning. Relevant manufacturing experience in pressure vessels, plate works.Language skills: English, French, Spanish, German, Portuguese.

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

Over 20 years of diversified experience in Quality system Management, Environmental Management Project Management, Contract Management, Customer Satisfaction Management (CSM), Customer Relation Management (CRM), Contract and Scope Calibration, Technical and legal evaluation, Contract Regulation Mana

Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth

Corrosion control, cathodic protection

Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

Materials Management, Logistics & Supply Chain Management, Stores & Inventory Control, Warehousing & Distribution, Coordinator.

Qualifications: BSC Electrical Engineering, Corporate member of the Institute of Electrical and Electronic Incorporate Engineers,

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out