Resume - I am Mechanical Engineer with first class career Record. I have 4 years Exp in t...

Misco Jobs

Resume #2441

CONTACT INFORMATION:
View contact information...

Educational Qualification:

Degree: B.E. (Mechanical)
University: Gujarat University
Year of Passing: June, 1999
Result: 70%
Certificate: Boiler Proficiency Engineer
Certificate No. 304, from Gujarat Govt

Experience: 03 years 09 months

Duration: Jan '02 to till date
Name of Company: Larsen & Toubro Cement Ltd. Kovaya, Gujarat.
Department: Captive Power Plant
Capacity: 60 MW
Designation: Engineer

Job Profile: operation of following equipment through DCS & Mark - V

Gas Turbine: EGT make, Frame 6, Naphtha fired.
Governed by GE Mark V, Speedtronic control system.

Steam Turbine: Alstom make 18.5MW, Double cylinder (HP & LP),Parallel shaft, Impulse & Condensing type, Sliding pressure (32-76 Kg/Cm2) & temperature control. CEGELEC Control System.

HRSG: L&T make, Forced circulation, Dual pressure, an option of Auxiliary & Supplementary firing with Naphtha as fuel, Sliding pressure & temperature. The operation of HRSG & Auxiliaries are controlled through DCS (Yokogawa Blue Star).

Responsibility: As a shift in charge I am responsible for overall operation of combine cycle power plant. I have to look after generation & distribution of power & steam. Also I have to look after optimization of plant generation with the help of Double bus-bar system & taking care of wheeling power to G.E.B. I am responsible for the troubleshooting and communication with the maintenance department. I have to keep track of operational Record for the ISO 9002,14000 &18000. Also I am responsible for annual shutdown planning & preparation of Boiler for annual Inspection. I am involved in maintenance activity during annual shutdown. I am responsible for the operation of 2X6.5 Mw D.G. Sets.& operation of Desalination plant for generation of raw water from seawater with the generation capacity 2040 TPD.

Past Experience
Duration: June, 1999 to Jan, 2002.

Company: NIRMA CHEMICALS LTD, BHAVNAGAR, GUJARAT.

Operation of 40 MW captive power plant, utilities (through DCS system)
consisting of: -
3 x 100 TPH CFBC (Circulating Fluidize Bed Combustion) Boilers & its auxillaries
2 x 16.5 Double Extraction condensing type Turbines & auxillaries supplied by Toyo Danky Which is made in Japan Technology.
1 x 6.5. MW Back Press Turbine & auxillaries supplied by B.H.E.L.
2 x 1400 TR VAC Chillers supplied by Thermax India Ltd.
4 x 35000 m3 / hr. Turbo Driven CO2 screw com. Supplied by M/s. GHH Borsing, Germany.
6 x 1200 m3/hr. double acting multi stage reciprocating Air Com. Supplied by Ingersol Rand.
Heavy Rotating & Multistage pumps like Turbo Drive & Electrical Drive. Boiler Feed Pumps.

DCS: Distributed control systems supplied by FoxBoro (Vers - 6.1)
Chennai a sister concern of M/s. Siebe USA.
Foxboro IA Series DCS System (8000 I/O Count).

Personal Details:

Date Of Birth: 01-05-1976.

Marital Status: Married

Height & Weigh: 178 cms., 72 Kg.

Languages Known: Gujarati, English & Hindi

Nationality: Indian

Expected Salary: As per company Rules

Salary Earn: 1,75,000 (Gross) & Other Benefit as per Company Rules.

Objective:
To enhance the domain of knowledge and professional experience gained by working in well-organized concern and for better prospect.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8551 to 8600 of 10923)

Go to Search Parameters...

Brief Description

Drilling Supervisor - 17 years Drilling Experience - 7 years International Experience - Safe and Efficient

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Hydroblaster

Proficient or familiar with a variety of engineering/design softwares and office tools including Flexcom, Mathcad, Autocad,Abaqus,FS2000, Windows, UNIX, Linux, Sun Solaris, Microsoft Office tools, Open-office tools, C,C++, Java, Fortran and Perl

Safety Professional

Cost Controller - B.Sc. Degree in Commerce Accounting Branch

Experience of leading a group of students at college level, volunteering and organizing various events at school and college level. Experience of working on rig.

I am flexible, reliable, company oriented, team player. I am fluent in French as well as English and I have learn Spanish.

Maintenance in PLC,DRIVES,Instrumentation Field

PETROLEUM (PRODUCTION ) ENGINEER

I began working in the oil and gas industry in 1993 at the age of 17. Since then I have worked very hard to continually improve my knowledge and abilities, and have recently been promoted to Production Foreman at the age of 31. All of my experience has been in offshore California.

Planning/Scheduling Engineer - Specilization in Primavera P3- Having 10years of experience in Oil, Gas, Refinery, Power & ME sectors worked under different Prestigious organisations like PDO, BP, QP, ADNOC, Bechtel, Snamprogetti, Sumitomo Corporation, HHI, etc - 6Yrs. in Planning & 4Yrs in Site(E&I)

I have wide experience in field of inspection for petroleum oil and gas project. With multi national companies using international standards and specification. I worked in middle east, Far East and Kazakstan. You can contect to any of company which I worked and confirm with them.

With more than 17th years of experience in performing design engineering and constructions on various facilities relating to Chemical Plant, Petrochemical Plant, Oil and Gas, Refineries, Commercial and Industrial Projects. Applies standard design principles and theories to complete assignments. Util

M.Sc Energy Economics and B.Sc Petroleum Engineering. Currently working as a Petroleum Economist, have a cumulation of 7 years in the Oil and Gas industry, 3 years + in the Upstream sector and 4 years in the Downstream Sector. Strong spreadsheet skills and intermediate level PEEP user.

Lead Instrumentation Technician

In 2002, I graduated with a Diploma in Marine Engineering. I worked as Marine Engineer on board merchant vessels and also in the shipyard as a Project Engineer. I stopped work to pursue my BEng. (Hons) in Mechanical Engineering. I am well versed in engineering softwares and EPCC procedures.

CHEMICAL ENGINEER

DEPOT OPERATIONS,LOGISTICS,ACCOUNTS RECEIVABLES/PAYABLE,PROCUREMENT-6YEARS

Bsc honours geophysics - geophysiscist

Electrical Power Engineer, fresh graduate

Degree in Chemical Engineering at the University of Pretoria. I see myself as an enthusiastic and disciplined person who will give his all in his career. I am very eager to learn to I am looking forward the opportunity of learning the inn’s and outs of industry

Experianace on CCTV, Load Monitoring Systems,Calibration of Equipments, Navigation and Communication Equipments

Seeking Production or Mechanical Engineer position in a prominent Company with a performance driven team-based culture.

Electronic/Instrumentation-based skills, good command in English, Computer literacy

Oil and gas lawyer with in-house experience

I work very well with little supervision, and am very good at completing tasks. I am looking for a career with a fast growing company, I have experience in a number of different areas, and am a very hard worker.

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Developed a Polypropylene laboratory single handed from scratch to an operational lab

Diploma in Mechanical Engineering with seven years experience of various projects such as: Oil Refinery, Petrochemical and Gas Plant Project, which involves on construction and inspection. wide knowledge on isometric drawing, Piping General Plan, Piping & Instrument Drawing and Process Flow Drawing.

PDMS designer(piping)/engineer

CAD DRAFTSMAN

I have done B.TECH from IIT ROORKEE....having experience of doing in Annealing Department for one year

B.E Mechanical (Rotating Equipment Design Engineer)

I want to pursue a career in the field of Industrial Automation. I also have interest in Industrial Manufacturing, Project Development and Process Control. I have interest in Programmable Logic Controllers, SCADA, A.C.Drives & DCS and thinking to develop skills & work in this field.

I have worked in the drilling by more of one year and Develop my career as well planner engineer and Support in Surface Logging Systems in Baker Hughes Inteq Colombia.

Work in a Petroleum company

Experienced telecommunications professional with key achievements, knowledge and abilities in the area of information technology, applications development and business systems.

Junior Petrophysicist and Well Log Analyst, Geophysicist

Over 7 years experience in Quality Control Inspection related to the Oil and Gas industries, of which 6 years have been spent in the Sultanate of Oman as a Senior Pipeline or multi-disciplined inspector, acting as a Third Party inspector on numerous onshore projects.

Telecommunications, programming, computers, networking, control systems, data communications

I have recently completed my masters in Petroleum Engineering. I have one year experience as a Mechanical Engineer. I have the expertise of cutting edge technology available in the field today. I would be quite willing to relocate internationally, if required.

Given In Resume Body.

Objetivo: aplicar en el área producción, perforación, estudio de yacimientos o petrofísica como Ingeniero de Petróleo.

Young enthusiastic Engineer (B.Tech Hons.;IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

I have 7 years experience onshore Australia with an accident free work history. I am a very safety conscious person looking for an international position to enhance my knowledge and experience in the oil industry.

Application for the post of Quality Assurance/Control Welding Inspector

I am Mechanical Engineer with first class career Record. I have 4 years Exp in the power Sector. I have Boiler Proficiency Certificate, which is essentials for Boiler Operation.

B. Tech. Chemical Engineer Diploma in Petrochemical technology 1 year Experience in Reliance Petroleum Ltd.

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 [ 172 ] 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out