Resume - Lean Manufacturing, Manufacturing/Business Process Improvement, Value Stream Map...

Misco Jobs

Resume #2451

CONTACT INFORMATION:
View contact information...

EDUCATION
2000 Ph.D.: Industrial Engineering, University of Wales Institute, Cardiff, Wales, United Kingdom.
1991 M.S.: Industrial Engineering & Management, Asian Institute of Technology, Bangkok, Thailand.
1987 B.S.: Mechanical Engineering, Rangoon Institute of Technology, Rangoon, Burma.
1999 Certified Lean Manufacturing Trainer (NIST-MEP)

EXPERIENCE
6/02 to Stewart & Stevenson, Houston, TX
1/03 Sr. Industrial Engineer (Lean Mfg., Business process improvement, JDEdwards ERP)
Responsibilities: Conducted several projects, including new production layout design using Lean Manufacturing techniques, Value Stream Mapping, Kaizen events, cost/benefit justifications, business process mapping & analysis, business process auditing, JDEdwards OneWorld ERP system, and continuous improvement. Also performed other Industrial Engineering functions.

6/98 to Texas Manufacturing Assistance Center (TMAC), Houston, TX
6/02 Sr. Manufacturing Consultant (manufacturing & management consulting experience)
Responsibilities: Provided consulting services to manufacturers in the Texas Gulf Coast region. Projects include Lean Manufacturing, cellular manufacturing, cost-benefit analysis of manufacturing technologies, organizational assessment, MRPII/ERP, Supply Chain Management, Project Management, business process improvement, inventory/demand management. Also took charge of ERP product line including education, training, software selection and implementation. Managed projects which included proposal preparation, presentation, project work and completion in a timely manner.
Accomplishments:
* Recipient Manufacturing Extension Partnership (MEP) Rookie of the Year Award at the 1999 National Institute of Standards & Technology (NIST) Conference.
* Achieved Lean Manufacturing certification presented by NIST-MEP.

4/95 to Design Engineering Research Centre (DERC), University of Wales, Cardiff, Wales, U.K.
4/98 Research Assistant (manufacturing research experience)
Responsibilities: Conducted research in the area of small batch lean production in the small to mid-sized manufacturing companies (SMEs). Developed a strategic and technical decision making methodology to identify process or technology improvement goals including layout planning and design, process planning, simulation modeling, and cost benefits analysis. Conducted a case study with an SME to implement the developed research methods. Conducted lectures to undergraduate students on the topic of manufacturing as needed.
Accomplishments:
* Recognized in the 15th edition of Marquis Who's Who in the World (1997) for outstanding achievement in research.
* Papers published in major international conferences

9/93 Unisys (Thailand) Ltd., Bangkok, Thailand to 3/95 Account Manager & Pre-Sales Consultant (consulting experience in ERP applications)
Responsibilities: Supervised the ERP line of business. Conducted sales and marketing of Unisys computer hardware and Syteline ERP software from Symix (now Frontstep) in order to provide enterprise-wise business solutions to Japanese manufacturers in Thailand. Performed assessments of client companies to obtain information necessary to identify operational improvements in areas such as inventory management, material planning, costing, shop floor control, scheduling and capacity management. Identified needs and requirements of companies through conducting preliminary studies of their manufacturing operations and provided for those needs through sales of software. Prepared proposals and made presentations to prospective clients. Developed and maintained client relationship. Organized seminars on MRPII/ERP. Also handled business accounts for Oracle and Sequent computer systems.

1/92 Weiser Locks Limited, Bangkok, Thailand to 8/93 Production Planning & Control Engineer (manufacturing management experience)
Responsibilities: Implemented a computerized manufacturing planning & control (MRPII) system using Micro-MAX MRP software (now Kewill ERP system). Coordinated material planning, forecasting, inventory control, and production control between Sales/Marketing and Manufacturing departments to deliver products to customers on a timely basis.
Accomplishments:
* Conducted product costing and time study that resulted in adoption of new product pricing which increased the company's sales.
* Successfully implemented basic modules of Micro-MAX computerized manufacturing planning & control system which resulted in better production planning process for the company.

1/88 Ahlone shipyard, Rangoon, Burma to 2/90 Mechanical Engineer (engineering experience)
Responsibilities: Designed and built new river craft. Remodeled and renovated old crafts. Maintained and repaired diesel engines. Assessed cost of undertakings. Assisted in training and managerial tasks.

COMPUTER SKILLS
Knowledge and experience with manufacturing applications software packages such as ERP/MRPII, MS Project Management, computer simulation, Visio, Expert Choice Decision Making, MS Office, Spreadsheet, Database, AutoCAD, and some programming.

LANGUAGE SKILL
English, Burmese, and Thai

AFFILIATIONS
Senior Member - Institute of Industrial Engineers (IIE) (1998 to present)
Member - American Production & Inventory Control Society (APICS) (1998 to present)

RESIDENCE STATUS
Citizen

REFERENCES AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 9905)

Go to Search Parameters...

Brief Description

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

Experienced Permit to Work Co-ordinator with HSE and Operations experience

Production Chemicals, Corrosion Monitoring.

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

At Present im a lead contol room operator of a 400 mmcf gas processing plant in wyoming

Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.

Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect

Instrumentation ICSS commissioning specialist

Experience Summary : Works in Construction Project 15 years & Works in Travel & Tour 4 years

SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP

Twenty years experience in Petrochem/Oil and Gas industry. Looking for international assignment.

Professional with a BS degree in Physics electronics, an MS in Project Management. I have experiences in project engineering and oil/gas seismic exploration. This background with over 20yrs work history equips me to deliver projects on schedule, with quality and within cost.

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

Graduate Diploma in Petroleum Engineering

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Telecom Engineer transmission speciality more than 16 years experience

Strong management professional who enjoys growing business and improving performance.

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using MonteCarlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

A highly motivated multi-lingual manager seeking a challenging position overseas. I am computer literate with experience using Microsoft Office applications. I have excellent oral and written communication skills. I have worked for a company and clients with strong safety-cultures.

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

Lean Manufacturing, Manufacturing/Business Process Improvement, Value Stream Mapping, Factory Layout Design/Cellular Manufacturing, Process Mapping & Analysis, Performance Measurement, MRPII/ERP, Operations Management, Project Management, Cost/Benefits Justification.

I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.

I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.

Experience well test engineer

OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2

I used to work in PT Weatherford Indonesia as QHSE Manager and PT Akzo Nobel Car Refinishes Jakarta also was a QHSE Manager. My main job basically is to help the company to have management system infrastructure in place and as a result to achieve ISO-OHSAS.

With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.

Environmental Health and Safety Consultant with overseas experience and extensive background in plant constructions, plant pre-commissioning and commissioning projects, plant expansions, major repairs, routine maintenance in refinery complexes, upgraders gas complexes and power plants.

(i) 8 years experience in Contract Management in a corporate environment (ii)for developing and implementing business development plan in concurrence with the organization objectives connected with marketing of p

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint

17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.

Drilling Activities: Drilling Operations: Bits, BHA, Drill String, BOP, Drilling Fluids, OBM, MWD, Wireline Logging, Conductor, Surface, Intermediate & Production Casing, Primary Cement, Wellheads. Offshore, Inland & Land Well Drilling Experience. Well Control. Drilling Management: Well Prognosis, A

Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers

FROSIO Certificate level 3. 28 years experience in oil & gas industry as coating/insulation inspector

Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer

DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

BSc in env. MSc in safety eng.

Oil and gas economics manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out