Resume - I put at your disposition 23 years of experience in the laboratory and field act...

Misco Jobs

Resume #2502

CONTACT INFORMATION:
View contact information...

Personal Information Citizenship: Venezuelan
Place of Birth: Cúcuta, Colombia
Current Position Drilling & Completion specialist, at PDVSA- INTEVEP, Research Center and Technological Support for the oil industry of Venezuela

Highest Degree PhD in Metallurgical Engineering with a minor in Mineral Economics Colorado School of Mines, USA, 1978

Other Major Degrees MSc. in Metallurgical Engineering, Colorado School of Mines, USA, 1976BSc. in Mechanical Engineering, Universidad Nacional of Bogota, Colombia,1971

Expertise *

23 years of experience at PDVSA-Intevep, among them 13 years at the drilling and completion group and the remaining time with materials performance and selection for production operations* Under Balanced Drilling (UBD)* Drillability of Hard Rocks* Product Development & Management (PDM)* Tubular evaluation and materials selection for production operations* Failure analysis of petroleum equipment* Quality Control Systems for the oil industry
Some knowledge on Multilaterals and low density fluids, aerated fluids and foams
Key Achievements * Coordinator and manager of Deep Drilling R&D Project and consulting services for drilling mechanics, mud design and cementing operations;* Drilling Business Manager, in charge of the main projects associated to drilling and completion operations, such as HPHT and horizontal wells. Development and deployment of drilling fluids and cementing products;* Leader of a group to improve a hematite densifier for a drilling fluid at PDVSA operations. With this objective, a Product Development & Management Program (PDM) was established and executed. Coordinated activities to collect the technical parameters associated to drilling operations with the densifier and the statistical analysis of the operational data to establish a window for a safe application of the product. Simultaneously, a research program was implemented to develop a new version of the product for more severe conditions and a field test was carried out;

Key Achievements(continued) * Leader of a group created to capture, adopt and implement the technology of Underbalanced Drilling to improve the productivity of wells. Enrolled on international UBD schools, seminars and forums (Signa, IADC, SPE and BP).Participated in joint projects on UBD (U. Tulsa, JNOC and IFP).Coordinated and taught a UBD school for field engineers, the evaluation of a UBD simulator (Dynaflodrill) and a PDVSA manual for the UBD feasibility. Promoted the application of UBD technology using foam for wells and technical-economical studies to evaluate the potential of this technology on PDVSA fields;* Coordinated the technology activities associated with the drillabality of hard rocks of PDVSA wells to increment rate of penetration. With this objective, a methodology was implemented to optimize the selection and use of conventional bits. Also coordinated the evaluation and development of new technology, such as percussion bits and resonance bits, in joint projects with the research centers Terratek and CSIRO. A second field test with a hammer bit was carried out in hard rocks using 12 ¼" hole;* Over fifteen years of experience in laboratory and field activities, related with materials performance and selection for the production operations in the petroleum industry;* Conducted the implementation of an integral methodology "ADIOS" (Attribute, Design, Inspection, Operation and Surrounding) to reduce the fatigue index of drill pipe strings and bottom hole assemblies;* Directed the tubular evaluation for H2S, sour service, L90-C90- T95- C100 and C100S, for CO2, 22%Cr, 13%Cr, 13%Cr-5%Ni and bimetallic tubing, 13%Cr-4130, for high mechanical resistance, P110-Q125 and V140 and for high collapse, HC95 and HC110 to elaborate the complementary specifications;* Conducted several material failure analyses of API and priority connections and tubulars for HPHT wells;* Coordinated the team work to improve the quality control systems of equipment for the national oil industry PDVSA;* Professor of the Simon Bolivar University, Venezuela.

Patents Cast Iron Welding Electrodes. United state Patent, 4,726,854, Feb. 23,1998

Awards and Assistantships First recipient of the Clark B. Carpenter Research Award, Colorado School of Mines, USA, 1978.Engineering Honor Degree, at Universidad Nacional, Bogota, Colombia, 1971.
Languages English / Spanish (both fluent)

Publications

Thirty (30) technical papers related with the different experience areas and published in AWS, WI, TJWS,NACE; SPE, AFST and Modern Casting Sixty(60) technical reports on the activities conducted in the Venezuelan oil industry
Affiliations Member, Society of Petroleum Engineers (SPE)
Book review Spanish translation of the first edition of the Design and Inspection of the Drilling String Standard, DS-1

Main Post – Formal Petroleum Education Management and general Advanced management program for oil & gas company managers PDVSA country vision PDVSA corporate vision Evaluating and managing projects Managerial grid Decision analysis Projects management Executive financial systems Quality control assurance The seven habits of highly effective people Psychology of intelligence analysis Technical Drilling technology course Drilling risk analysis Drill stem design and inspection, DS-1TRUE, Training to Reduce Unscheduled Events Advance casing and tubing design school Modern well completion practices Threaded connections and tubular products for special application Basic Underbalanced Drilling, UBD, Course(Signa E.)Advanced Under balanced Well Design,UBD, Course (Blade E.)SPE- Under balanced Drilling vs Designer Fluids Forum (Session Manager)

Working Assignations * Assigned for nine months to a technical team of PDVSA Exploration & Production in Caracas to restructure the corporate drilling operations;* Assigned for three months to Statoil-Norway, to participate in the drilling operation of a HPHT well at North Sea;* Assigned for three months to operation areas for drilling of HPHT wells with H2S and CO2 at southern part of Lake Maracaibo, Venezuela;* Assigned to Sumitomo Research Center, Amagasaki, Japan, for H2S and CO2 testing methods for high alloys.* Assigned to Total in France for a tubular and material selection of the gas field Yucal-Placer in Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 9785)

Go to Search Parameters...

Brief Description

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

Industrial, B2B and Retail sales & marketing of ‘Fuels, Lubricants and other Petroleum Products’

Management Consultant / Project Manager / Business Process Analyst – task oriented, problem solver with successful experience in planning and implementing operational enhancements in support of critical business processes.

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

Sustainable development, csr, supply chain management, prequalification, international business

Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.

Project engineer with management skills

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I am a highly motivated individual, who thrives on meeting targets. My positive attitude makes me an excellent team player. I have a very good command over chemical tanker & tanker practices.I have been part of ship building in the yard as a owners rep under the site manager for 2 Chemical Tankers.

Skills : Structural Analysis & Design with help of Engineering Software qualification : Master of Engineering (Civil) Specialisation : Structural Engineering

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Experience in Pre-commissioning, Commissioning, Startup,Operation and Trouble shooting.Acquaintance in Panel operation. Experience in operating Distillation Columns; Experience in Water Treatment/Waste Water Treatment; Driving HSE performance; Knowledge in Computers and Operating System. Acquainta

Project Manager, Construction Manager, Field Engineer, Designated Representative Heavy Electrical Background.

Knowledge in computer, pre-com and commissioning activities and can work as a chemist laso

Civil/Structural Checker with 25 years experience

21 years senior piping CAD designer with PDMS and ...

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

Process sr engineer

Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Involved for more than 19 yrs in structural work related to oil and gas industry. Basic/Detailed Engineering, Installation Engineering and integrity assessment of Fixed Offshore Structures (Both jacket and topsides). Familiar with structural analysis programs like SACS, ASAS, SESAM, GRLWEAP, etc.

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Plant inspection: with API 510, 570, 653. adttional qualification in welding inspection

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Senior Pipe Stress Engineer

Contract Analyst, Supply Chain Executive, Senior LWD/MWD Engineer, General Manager/Director, Rig Engineer.

Maint. and trouble shooting of all kinds of rotating., and static equip.,

Rig mechanic with a vast experience

Installatation, commissioning , maintenance & repair of all instrument working in petrochemicals plant / gas/ refinery. I also do the EPC PROJECT of Reliance retail outlet .for10 months

Upstream and mid-stream experience(27 years) plus underground waste water injection

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out