Resume - Total 8 years of experience. Well experienced in specifying, designing, detailed...

Misco Jobs

Resume #2510

CONTACT INFORMATION:
View contact information...

Introduction:

I am a 30 year young, self-motivated graduate mechanical engineer with a total eight years (approx.) experience in basic design, detailed engineering and engineering management of static equipment (Pressure Vessels) for Refinery, Petrochemicals, Oil & Gas and Fertilizer Projects.
I have worked in both EPC environment (Bechtel) as well as in Fabrication Industry environment (L&T and BHPV of India).
Possess excellent analytical & technical skills, leadership quality, and ability to work in team with a logical bent of mind.
Competencies:
* Technical
* Extensive hands on experience and thorough technical proficiency in Pressure Vessels & Piping codes (ASME, Sec. VIII, Div.1, ASME, Sec. VIII, Div.2, ASME Sec. I, ASME B 31.3, AD Merkblatter and PD-5500), Wind / Earthquake design codes (IBC, UBC, ASCE, IS etc.).
* Technical proficiency in detailed engineering & fabrication of Pressure Vessels. Possesses sound knowledge on materials, fabrication processes, welding & NDE requirements with exposure to project management and cost estimation. Familiar with Good engineering practice prevailing in the industry.
* Knows how to prepare standard discipline deliverables such as Equipment Specifications, Datasheets, Design Calculations, Material Requisitions for Quotation, Evaluation of Supplier proposals, Material Requisitions for Purchase. Knows how to review vendor documents. Provides input on vessel orientation, Nozzles Orientation & Elevation, Location of Pipe support & guide clips and Location of Ladder & Platforms to Piping.
* Knows how to coordinate technical issues within discipline, with other disciplines, with engineering staff, with vendors and with clients.
* Understands EPC Work process and dependencies between functions. Understands roles of other departments / disciplines on the project. Familiar with methods of procurement (including bidding & evaluation process) and construction requirements
* Conversant with operating procedures to suit ISO-9001, ISO-14000, OHSAS 18000 and ASME code stamping (U, U2 & S stamp jobs) requirements
* Exposed to latest Total Quality Management tools (like Juran's Quality Improvement Technique, TQM, COPQ, Kaizen concept etc.) through various training program and direct participation.
* Exposed to engineering of Refractory Lining (Refractory Anchorage, Refractory Application and Heat Dry out of Refractory in FCC Units), Plasite Lining etc.
* Behavioral
* Attended various personality development programs conducted by reputed faculty members.
* Good written & verbal communication skills
* Good interpersonal skills
* Enthusiasm to learn new things and easily adaptable to changes
* Computer Literacy
* Familiar with working in a highly computerized environment (with independent PC, Local & Wide Area Network, Windows / NT Operating System, GroupWise / Outlook e-mail, Internet, Infoworks and other necessary software).
* Conversant with computer software packages like Compress (Codeware), PV Elite (COADE) etc.
* Familiar (with very minimal hands on experience) with drafting packages like AutoCAD, Microstation etc.
* Extensive working experience with MS Office Applications (Microsoft Word, Excel, PowerPoint etc.)
* Working experience with Baan IV ERP Package in Engg. Data Management Area with knowledge of other related area.
Job Responsibilities:
* My present job responsibilities in Engineering, Procurement and Construction Company are as follows:
* Preparing technical specifications based on project design basis, client specifications & Bechtel standard specifications, design guides & drawings.
* Carrying out Mechanical Design using Computer Program and as per international Codes & standards / Bechtel Guidelines
* Preparation of Mechanical Data Sheet / Drawings based on inputs from Process Engineering and providing inputs to Designers for detailed drawings (if required).
* Preparing Material requisition, technical Bid Tabulation & Purchase requisition
* Reviewing vendor documents like Design calculations, Fabrication drawings, Technical clarifications & deviation request
* Providing Site support / troubleshooting.
* Coordinating with other disciplines (Process/ Project / Civil / Piping/ Procurement / vendors / client)
* My job responsibilities in Fabrication Industry included the following:
* Preparation / Checking / Approving Mechanical Design Calculations of static process equipment like Pressure Vessels, Columns, Reactors etc. in accordance with national & international codes and regulations like ASME, BS, IS UBC, ASCE etc.
* Checking / Approval of detailed fabrication drawings & bill of material. Arranging approval of clients / process licensor / third party on all technical documents.
* Providing engineering services (Mechanical Design, Material Take off etc.) for Estimation/Marketing for quote during pre-award stage.
* Selection of Materials (if required), Preparation of material take off and material purchase specifications for Pressure Vessels, Storage Vessels, Reactors and other related equipment, components & system during post order stage.
* Providing technical assistance to purchase department in bid evaluation for procurement of raw materials & bought out components for Pressure Vessels, Reactors & other related equipment.
* Coordinating all technical activities with customer, vendor, process licensor / consultant and other agencies involved for the project assigned.
* Controlling all project documentation and managing all engineering activities from receipt of Request for Quotation to Final Inspection & Shipping Release Note.
* Participate in techno-commercial meeting & progress review meeting to minimize the project cost & improve the schedule.
* Providing all engineering support to Sales Dept. in realizing all stage payments & final payments.
* Arranging technical & behavioral Training and professional development of team members. Guiding the team members to prepare drawings / design calculations to meet customer requirements & code requirements within budget & within schedule.
* Managing sub-contracting of engineering activities during peak workload period with minimal permanent staff.
* Participating in organizational efforts in improving work process and complying all ISO-9000 & ASME code stamping (U,U2,S) requirements.
Professional Experience:

v From 22nd July, 2002 to till date
* Working with M/s Bechtel India Pvt. Limited since 22nd July, 2002 as a Mechanical Engineer (Pressure Vessel Specialist).
* Company Profile: Bechtel is one of the world's largest engineering-construction firms. Founded in 1898, Bechtel has provided premier technical, management, and directly related services to develop, manage, engineer, build, and operate installations for customers worldwide.
In 2001, Bechtel has booked $9.3 billion in new business and worked off $13.4 billion in revenue.
Bechtel is privately owned and in its fourth generation of Bechtel family leadership. You may refer www.bechtel.com for more details.

Bechtel India Pvt. Limited, which is 100% owned by M/s Bechtel Corporation-USA provides support to various Global Business Units located worldwide.
* Role: I am functioning as a responsible mechanical engineer based out of Bechtel's Houston, USA office looking after design & detailed engg. for Vessels & Columns and Packaged units for Egyptian LNG Project for Petroleum & Chemicals Global Business Unit since September 2, 2002.
v From 21st September, 1998 to 6th July, 2002 (Approx. 4 years)
* Worked in M/s Larsen & Toubro Limited, Heavy Engineering Division, Hazira Works, Surat, India from 21st September, 1998 to 6th July, 2002 as Sr. Engineer-Product Design & Engineering.
* Company Profile: Larsen & Toubro Limited is a professionally managed company with leading edge capabilities in fields related to Heavy Engineering, EPC & Constructions Projects, Electrical & Electronics Business, Cement & Information Technology. Turnover 1.75 b$ approx. You may refer www.larsentoubro.com & www.lnthed.com for details.
Hazira Works, part of its Heavy Engineering Division is engaged in design, engineering, procurement, fabrication & testing of Process Equipment for Refinery, Petrochemicals & other process plants. L&T-Hazira Works has world class facility for manufacturing Process Plant Equipment.

The company has implemented latest concept of Total Quality Management with emphasis on continuous Improvement (e.g. Kaizen concept and Juran's Quality Improvement Technique). They have also implemented BaaN as ERP Package. L&T is accredited with ISO-9901, TUV, ISO-14001 & OHSAS-18001 certifications. The company has ASME authorization or manufacturing Pressure Vessels with U, U2 & S stamp.
* Role: I was working as a lead design engineer, responsible for complete design, detailed engineering and project engineering of Pressure Vessels meeting & exceeding customer satisfactions within available budget & time frame. I was leading a small group consisting of graduate design engineers, designers & drafting personnel and was reporting to Project Manager.

v From 11th August, 1995 to 21st September, 1998 (Approx. 3 years 1 month)
* Worked in M/s Bharat Heavy Plate & Vessels (BHPV) Limited (A Govt. of India Enterprise), Visakhapatnam, India from 11th August, 1995 to 17th September, 1998 as Engineer-Process Plants Engineering.
* Company Profile: BHPV is a company owned by Govt. of India with interest in Heavy Engineering & Construction Projects. The company has ISO-9901 & TUV Certifications. The company has ASME authorisation or manufacturing Pressure Vessels with U, U2, S & R stamp. You may refer www.bhpvl.com
* Role: I was working as design engineer. My role was to carryout design & detailed engineering of Pressure Vessels meeting customer requirements within schedule. Initially, I have started as a member of an engineering team. At the time of leaving BHPV, I was leading a small group consisting of one graduate design engineer & two drafting personnel and reporting to Head of Process Plants Engineering dept.

Assignments Handled (Partial List):
Some of the assignments handled are
* As a Pressure Vessel Specialist in Engineering, Procurement and Construction Company, carrying out design, detailed engineering & engg. management of
* Vessels & Columns for Egyptian LNG Project (Current Assignment)
* Liquid Nitrogen Package for Egyptian LNG Project (Current Assignment)
* As a Mechanical Design Engineer in Fabrication Industry, carried out design, detailed engineering & engineering management of:
* Towers & Reactors for ExxonMobil Refining & Supply Company through M/s Kellog Brown & Roots Inc., USA.
* Catofin Reactors and Product Splitter for M/s Saudi Polyolefins Company, Al-Jubail, Saudi Arbia through M/s Samsung Engineering Co., Korea & ABB-Houston.
* FCC Reactor, Regenerator and other related equipment & refractory lined pipes (i.e. complete FCC Reactor-Regenerator Assembly including Orifice Chambers as per Stone & Webster Process Design) for IOCL-Barauni through Samsung Engineering Co., Korea & Engineers India Ltd., New Delhi.
* 2nd DHDS Reactor for IOCL-Haldia.
* Product Purge Bins, Product Receiver & Vent recovery Surge Tank (all ASME Code stamped Vessel) for Tosco Refining Company, USA through Kvaerner Process, USA.
* Pressurisers, Gas Transfer Bottle & Liquid Poison Tank for BARC-Mumbai.
* FCC VSS Reactor, Orifice Chamber, Riser & Wye Section, Regenerated Catalyst Stand Pipe and Regenerator air Distributor for FCC Revamp of IOCL-Gujarat Refinery through UOP & EIL.
* Depentaniser for Gandhar Petrochemicals complex of IPCL-Dahej through EIL.
* Separator & other Pressure Vessels for DHDS Unit of IOCL-Haldia through M/s Tecnimont.
* Wax Hydro-finishing Reactor for IOCL- Digboi, Barauni & Haldia through EIL.
* Pressure Vessels / Storage Vessels & Separators for M/s Haldia Petrochemicals Limited through M/s Toyo Engineering Corporation.
* Coke Chambers & Hot Low Pressure Separator for M/s NRL- Numaligarh through EIL.
* Inter Pressure Separator (ASME Code stamped Vessel) for M/s GAIL-Auraiya through EIL.
* High Pressure Surge Vessels (Multilayer Vessels) for Santhal & Balol Projects of M/s ONGC through EIL.
* Urea Hydrolyzer, Ammonia Receiver & Recovery Tower and Urea reactor for Kakinada Expansion project of M/s NFCL.
Education:

Examination Passed: Bachelor Degree in Mechanical Engineering
(4 years course after 12 years of education)
Institution: Regional Engineering College
(Now known as National Institute of Technology), Rourkela, Orissa, India
(An Autonomous College of Samabalpur University and one of most reputed college in India)
Year of Passing: 1995
Percentage of Marks: 73.9 (First Division)
Personal Details:

Date of birth: 21st June, 1973
Nationality: Indian
Sex: Male
Marital Status: Married
Languages Known: Able to read, write, understand & speak English,
Hindi & Oriya.

Expected Gross Salary: Negotiable
Time Period to join the new assignment: within 30 to 45 days from receipt of firm appointment offer (Negotiable).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5551 to 5600 of 9785)

Go to Search Parameters...

Brief Description

Recent graduate with an MSc degree in Oil and Gas Engineering and looking for a role where I could use the engineering knowledge and academic skills that I have gained from my MSc degree, and develop a long term drilling and well engineering career.

filing, answering telephone, replying e-mails, making an input and output letters, weekly and monthly report, booking a hotel and travel reservation, preparing for expatriate’s visa and passport also the flight schedule, and checking for crew change.

B.Tech from IITK, 4 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I have been working at Total E&P Indonesie as a Well Service Supervisor since 1998 until March 2006 (supervise slickline, well testing and maintenance, electricline (perforation and logging), snubbing unit and coil tubing unit) and as a Contract Workover Barge supervisor (with workover RIG) at CNOOC

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

8 years of international experience mainly in the oil field. Field Service Manager/General Field Engineer/IT Project Manager for Schlumberger worldwide/SCADA Business Developer Manager/Project Manager and SCADA Protocol developer for South America.

I have been working international as a contract wellsite supervisor, My area of expertise is in completions, abandonment and workover. I have worked on wells to 3500m in depth, sour from 1%-3% for about 1/2 my career.

KEYWORDS Mechanical, Electromechanical, Power , Control , sheet metal, Acoustics , ISO 9001, CAE , CAD, CAM, Manufacturing, Production, Maintenance .

Experience with successfully managing all aspects of a large drilling center including implementing manual and automated drilling systems; selecting, managing and training staff.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Seeking position that would help develop myself in the management field in the Petroleum Industry

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Hands on experience in the dynamics of the offshore oil drilling industry. Proven, reliable and committed to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

To establish wider horizons in the automation of business with the inherited knowledge in the respective field.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

An International Quality Assurance & Safety Manager with a proven track record for ISO 9001 implementation, maintenance and development within the Oilfield Engineering and Manufacturing Industries.An experienced Lead Auditor of Management Systems, Engineering Projects and Suppliers

PDS, Microstation, AutoCAD 2D/3D Piping Designer

B.Tech(Chemical Engineerin),Highly proficiency in english and management and Technical skills

Naval Architecture

B.E.& DIPLOMA IN MECHANICAL,EXPERIENCE IN CADCAM DESIGN,SHOP FLOOR MANAGEMENT,MAN MACHINE MANAGEMENT,ERP ENDUSER,INTERNAL AUDITOR ISO 9000,ISO 14000,ISO 18000,VENDOR DEVELOPEMENT

BE - ELECTRONICS & TELECOMMUNICATION , Fresher From MUMBAI UNIVERSITY

Prepare material requirement list for job pack, Check and monitor the shipping schedule for material delivery on site, Received, inspect stores and inventories all material received for stacking in accordance with established material system procedures, directive and methods, Insure incoming materia

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

Instrument, Electronic and Process Technician with exceptional people skills and ability to adapt & learn.

Analyzer Technician

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Dear Sir/Madam,

SEEKING A POST IN ESTEEMED COMPANY

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

CAN DO ALL TYPES OF MAINTAINENCE OF INSTRUMENTS,THEIR CALIBRATION,ZEROING,ERROR DETECTION ETC.

B.Eng in Metallurgical Engineering

Having 6months experience as instrument technician completing BE

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

My main features respecting my work are hard working, honest and keen to progress

Chemist/Lab technician

• Diploma with a total of 7 years experience in Construction & Maintenance of Plant Instrumentation systems from planning and scheduling to execution of the job.

I have 7 years experienc in oil &gas &power plant industry,my experienc is about piping engineer,i am experienced to work with pds software .i worked with 3 forign country(LINDE/TECHNIP/DOOSAN).

HSE Safety

Offshore Platform Superintendent, OIM certified. Manage combined operations. Core skill - Electrical and Instrumentation.

10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator

I'm a young and fresh graduate of geology from a reputable University in Nigeria Who loves to work in a challenging work environment where standards are high.

First Prev 101 102 103 104 105 106 107 108 109 110 111 [ 112 ] 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out