Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2561 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering.

EDUCATION

Ph.D. in Civil Engineering (1999-Present)
Concentration: Environmental Engineering, University of Colorado, Denver,CO
Thesis: Biodegradation and Biostabilization of DNAPL coal tar.

M.S. in Civil Engineering (May 1998)
Concentration: Environmental Engineering, University of Colorado, Denver, CO
Thesis: Arsenic removal from ground water using zero valent iron

B.S. in Environmental Engineering (June 1992)
Environmental Engineering Department of the Ataturk University, Erzurum, Turkey,
Thesis: Optimization and chemical characterization of the wastewater caused by Erzurum Meat Industry.

PROFESSIONAL EXPERIENCE

University Instructor:
Civil Engineering Department of University of Colorado, Denver, CO (2002 – Present)
* Teaching " CE2200: Computing Methods in Civil Engineering" undergraduate civil engineering class.

Research Assistant:
Civil Engineering Department of University of Colorado, Denver, CO
* Biodegradation and Biostabilization of DNAPL Coal Tar (1999 – present)

Civil and Environmental Engineering of Arizona State University, Tempe, AZ
* Nitrate Removal from Groundwater using Zero Valent Iron (1998 – 1999)

Civil Engineering Department of University of Colorado at Denver, CO (1996 – 1998)
* Arsenic removal from water and contaminated water using Zero-Valent iron (Fe )

Environmental Engineering Department of Ataturk University, Erzurum, Turkey
* Nitrogen removal from groundwater using membrane processes. (1993 – 1994)

Teaching Assistant:
Civil Engineering Department of University of Colorado, Denver, CO (1997 – 1998)
* CE3414 Design of Water and Wastewater Systems
* CE5811 Multimedia Transport & Fate of Environmental Pollutants
* CE5504 Introduction to Environmental Engineering.
*
Environmental Engineering Department of Ataturk University, Erzurum, Turkey (1993 –1995)
* Unit Operations of Environmental Engineering-II
* Environmental Engineering Chemistry-II
* Water Pollution & Quality Control
* Environmental Engineering Chemistry-I
* Unit Operations of Environmental Engineering-I
* Wastewater Treatment
* Air Pollution & Control Lab.

Environmental Engineer: (1993-1995)
Environmental Problems and Research Center of Ataturk University, Erzurum, Turkey

Student Intern: (1990 – 1991)
Environmental Problems and Research Center of Ataturk University, Erzurum, Turkey
* Water – Wastewater Laboratory

PUBLICATIONS

* Isleyen, M., A. Ramaswami, K. Morrison, A.R. Bielefeldt, T. Illangasekare, and K. Kelly. " Biodegradation Kinetics of Complex PAH Mixtures Released from Coal Tar" (in review)

* Ramaswami, A., K. Kadrmas, M. Isleyen, T. Illangasekare, A.R. Bielefeldt, and K. Kelly. "Sensitivity Analysis of DNAPL Pool Dissolution: Experimental Evaluation with Multicomponent Coal Tar" (in review)

* Ramaswami, A., P.K. Johansen, M. Isleyen, A.R. Bielefeldt, T. Illangasekare. "Assessing multicomponent DNAPL Biostabilization I: Coal Tar." Journal of Environmental Engineering, Vol. 127, No. 12, 2001

* Ramaswami, A., S. Tawachsupa, and M. Isleyen " Batch-mixed iron treatment of high arsenic waters." Water Res. Vol. 35, No. 18, 2001

* Isleyen, M., K.A. Morrison, A. Ramaswami, A. Bielefeldt, and T. Illangasekare. "Biodegradation of PAH Mixtures" Hazardous Waste Research Conference, Manhattan, KS, 2001

* Isleyen, M., S. Tawachsupa, and A. Ramaswami. "Zero-valent iron for treatment of high arsenic water." Hazardous Waste Research Conference, Denver, CO, 2000.

* Keskinler, B., N. Topcu, E. Yildiz, M. Isleyen, E. Kocadagistan, and T. Pakdemir. "Cross-flow ultrafiltration of domestic waste water by addition of powder activated carbon." Environmental Conference, Erzurum-Turkey, 1995

* Nugoglu, Yasar, E. Yildiz, and M. Isleyen. " Environmental pollution caused by the thermal plants of Yatagan and Yenikoy." Energy and Environmental Conference, Mersin-Turkey, 1994

AWARDS

* Special Poster Recognition for "Zero-Valent Iron for Treatment of High Arsenic Water." Hazardous Waste Conference, Denver, CO, 2000
* Graduate Scholarship of Civil Engineering Department, Denver, CO (Spring 1998)
* Graduated as the second successful student from Environmental Engineering Department of Ataturk University, Erzurum, Turkey (1992)
* Fellowship from the Ministry of Education, Turkey (1996 –2001)

SPECIAL SKILLS

Environmental Analysis:
* HPLC, GC, and IC
Programing & Softwares
* Proficient in FORTRAN and BASIC programming languages.
* Proficient in Maple and SPSS.
* Proficient in MS-DOS, Windows and Mac Operating Systems.
* Highly experienced with spreadsheet and graphical packages such as Excel, KaleidaGraph, and Sigma Plot.
* Proficient in groundwater & air modeling program such as MODIME (MODFLOW / MT3D) and TSCREEN.

References available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2301 to 2350 of 10816)Go to Search Parameters...
Brief Description
20+ years in oil industry with extensive international exposure. Most part in drilling rigs management, but also human resource management, general management and more recently a training coordinator and Instructor for well engineers.
25 years exploration and production experience. Maintenance engineer.
Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.
Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,
Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.
Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.
Offering extraordinary experience in areas of purchasing, material coordination, project management, inventory control, and supervisory abilities. Seeking opportunities with a team organization in the natural resources extraction industry.
Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.
I am interested in a position in the EHS field. I have a degree from University of Findlay
A material analyst with a strong ability to plan and execute build schedules that support material requirements and maintain manageable inventory target levels. Develops and manages the inbound and outbound flow of materials and parts.
To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.
My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.
Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.
Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.
Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.
I am a very experienced Seismic Crew Party Manager (23 years), currently seeking a Field Crew Management, QHSE, Mechanical Supervisor, or Consultancy position within the exploration industry. I am available for immediate relocation worldwide.
A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.
Wide ranging petroleum engineer with successful record in reservoir development planning/management, 17 years: BHP, PGS, BP, Agip, Burlington, Phillips, Marathon, UT Austin(1982-85), NL Baroid, international experience in Nigeria, Kuwait, Egypt, Angola, Norway, Algeria, Syria, NorthSea
Cost Engineer with gas pipeline & oilfield production background also some power plant and mining background.
Environmental professional with a solid background and experience in environmental projects and permits under CERCLA, RCRA, OSHA, FERC, NESHAP, CAA, and CWA regulations. A highly motivated project manager and effective communicator.
Having completed my service at the age of 60 in Sept, 2000, I still want to live a busy life. Earn and live a better living exploiting 36 years of my experience in oil well drilling industry.
Looking for QHSE MANAGER position in international operations. 20 years experience in Oil&Gas. International work experience in Russia (West Siberia), Canada, Kazakhstan, Turkmenistan, Azerbaijan, Oman, Georgia, Cameroon. Bi-Lingual (English and Russian.
20+ years of Manufacturing experience, with 16 years with oil and gas operations. Supervised 4 plants, 8 departments and 350 men.
International Technical Sales/ Business Development
Chemical Engineer with 15 years of Safety, Environmental, & Transportation regulatory experience in oil, gas processing, chemical distribution, and trucking industries, including design, construction, operations and policy and procedure development compliant with regulatory requirements.
Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering
Ingeniero de Petróleo en Operaciones de Producción. Pozos Productores y métodos de Levantamiento: Artificial por Gas y Bombeo, Flujo Natural y Cretácicos. Manejo de Estaciones de Flujo, (almacenamiento, tratamiento, separación, prueba de pozos, instrumentación y automatización).
Over 20 years experience, proven with successful results. As Country Manager, Director, and VP of international energy corporations, managed the operational strategies, financial functions, planning and reporting of large oil production and service organizations around the world. Fluent Russian.
Senior Executive with broad production and energy service industry experience.
Science 20 years in production operations, hydraulic fracturing, Matrix acidizing, well completions, Coil Tubing, nitrogen services, water/sand control operations, user of software STIM Plan, fracproPT for fracturing, I am a permanent resident of Canada.
1. Project Manager for the engineering, procurement, construction and installation of Substructures (Jackets), Topsides, and Gas Compression Modules, FPSOs, Submarine Pipelines, Submarine Cables, Mooring Buoys and PLEMs ¨C Offshore Oil and Gas Industry.
Olefins Plant/Production/Project/Engineering Management. Project Controls. Skilled troubleshooter. Results-driven leader who strengthens competitive position by providing outstanding client service, focused on profit, responsibility and discipline.
Geologist graduated at University of La Plata, Argentina. Mudlogger at Exlog, data Engineer at Exlog/Baker Hughes Inteq, Argentina. Mudlogging Coordinator at Baker Hughes Inteq, Argentina. Ops. Manager at Datalog, Argentina. Wellsite Geologist in Argentina and Venezuela.
QA/QC MANAGEMENT, Experience as laboratory manager, supervisor, Chemist, process engineer.
Working as an international geologist with differant companys and differant countries gave me a very good chance to acheeve a high degree of commumication and interpersonal skills.
TIG, MIG SMAW, duel shield, drawing, ASTM, ASME codes, MIL 256-7, copper-nickel, plasma cutting
Oil and gas phd in geology
Qualified and experience AutoCAD Designer familiar with the technical language of the oil and gas industries Civil & Structural drawings using AutoCAD, Isometrics, Process and Instrumentation drawings. Experienced with one of Shell’s major projects in the Niger Delta (Forcados Yokri Integrated Pro.
Working with Geophysical Data Acquisition Group and have more than six years of insightful experience in the field of 2D/3D offshore & onshore seismic data acquisition in Indian and International exploration acreages.
Since 2004 I have been employed at Frontken (S) Pte Ltd in various Inspection and Supervisory positions in the field of protective coatings – including powder coating, painting and thermal spray coating. I have hands-on experience in thermal spray coating and painting application.
Five plus years of process engineering experience in the field of refinery and petrochemical with esteemed organizations in India and world.
I have worked as Process gas anlalyzer come inst.tech. currently working as H2S safety consulyant.
Security specialist
Drilling Systems Offshore Instrumentation Engineer with 12 years experience
(IRCA, UK Certified Lead Auditor QMS ISO 9001:2008)
Diploma in Civil Engineering Studied
Seeking as an Engineer – Instrumentation in Automation, Design & Detailed engineering activities serving core industries that can utilize my skills and provides potential to enhance my knowledge and to attain goal of company.
Experienced Buyer
Graduate Civil Engineer and Structural Engineering M.Sc., 6 years experienced in Offshore structures. Experience in jackets (FEED and Detail) and Semi-submersible (FEED and Detail) projects. Easy learning and excellent skills in softwares such as SACS, ANSYS, ABAQUS, GT Strudl, Solid Works, Patran,
INTERNATIONAL MARKETING ( FIRED HEATER/BOILER/WASTE HEAT BOILERS/SOLAR STEAM GENERATOR )+6YRS EXP+ME IN MECH DESIGN
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   [ 47 ]   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com