Resume - Analyser engineer with 15 years experience

Misco Jobs

Resume #25747

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
Over 13 years experience (4 years in Gulf) in erection, commissioning, maintenance of online process gas analyzers, laboratory analyzers, analytical instruments and gas chromatographs, troubleshooting, designing sample handling system for analysers

EDUCATIONAL QUALIFICATION:
Bachelor of Technology (B-Tech) in Electronics and Communication Engineering, from Calicut University, Kerala, India in March 1991 Overseas service training attended
Undergone intensive factory service training at manufacturing locations in USA for the following analysers manufacturing Companies
* Ametek Western research Inc., USA for UV photometric analyzers used for sulfur recovery plants, like tail ggas and H2S analysers
* Panametrics Inc., USA for moisture and oxyen analyzers
* Ametek-Thermox Inc. for moisture analysers.
* Varlen Instruments Inc for Petroleum physical property analysers.
Thermo Electron Corp.for ambient air quality monitoring analysers
And satack gas monitoring analysers.

EXPERIENCE IN DETAIL
1)Presently working with Saudi Arabian Kent Co Ltd deputed in Saudi
ARAMCO, Rastanura refinary, as an analyser engineer for the support and maitanance of online analysers, since september 2004
M/S Saudi Kent is a part of Kentz group, an Irish multenational company, undertaking electrical and instrumentation design, execution of projects, and expert manpower supply.It has wide reputation in the middle east.
Job profile
* supporting day to day maintenance of analysers and GCs
* preparing maintenance schedule
* modification of sampling systems
* troubleshooting crtical problems
* implementation of packages for the analysers

2) worked with M/S Kharafi National Company, Safat, Kuwait as an analyzer engineer deputed in Kuwait National Petroleum Company Shuaiba refinery from Jan 2001 to Jan 2004
Company profile
M/S Kharafi national is a multenational company based in Kuwait having existance in all overe middle east undertaking mechanical construction, electrical and instrumentation projects and maitenance contracts.
Responsibilities
* To lead a group of technicians for maintaining around 300 process gas analysers, laboratory instruments and gas chromatographs
* Preparing and implementing preventive maintenance schedule
* Critical spares identification and spares parts inventory
* Performing calibration of the instruments conforming to ASTM standard test method and ISO 9001 standard.
* Worked as a team member in the implementation of ISO 9001 certification in the chemical laboratory.
3) Worked with M/s Chemtrols Engineering Limited Mumbai, India as A Asst.Manager customer support from July1992 to Jan 2001.
Company profile
M/s Chemtrols is an ISO 9001 company in India intergrating analyser shelters and packages. It represents reputed analysers manufacturing companies in India.
Responsibilities
* commissioning of all types of process gas and liquid analyzers
* Customer training both at site and factory.
* Co-ordination of maintenance contract projects at different sites

Analyzers handled
* UV photometric analyzers for sulfur recovery units, by Ametek –Western Research USA, model 700, 900 ADA, 920, 880 NSL, Model 4000 etc.
* Oxygen analyzers Zirconia as well as thermal conductivity by Panametrics, Ametek Thermox, Teledyne, Beckman etc.
* Maihak analysers for CO, CO2, Sox, Nox, and hydrocarbons. Model 650, model 700 etc.
* Stack flow meters and opacity meters by Panametrics
* Ambient and stack gas monitoring analyzers by Themo Environmental Instruments Inc model, model 42, model 43, model 48, model 58 etc
* GC by Applied automation.
* Houston Atlas made analyzers for total sulfur analysis for gas and liquid samples both in PPM and PPB ranges.
* Moisture analyzers by Panametrics and Ametek -Thermox
* H2S analyzer by Dupond.
* Rosemount analyzers
* Automatic petroleum distillation apparatus of M/s Walter Herzog Germany
* Lead and Sulfur in oil analyzers by Oxford Instruments
* Hydrogen in oil analyzers by Oxford Instruments USA model 4000
* Gas chromatographs by Analytical controls for hydrocarbons model 5890 and 6890
* Gas chromatographs by Varian Model 3400 Cx for hydrogen and hydrocarbons and model CP 3800 for hydrocarbons.
* Atomic absorption spectrometer by Varian for trace metal analysis model AA 30/40
* ICP –AES by Varian for trace metal analysis for organic as well as aqueous samples
* Graphite atomic absorption spectrometer model Z 4000 BY Perkin Elmer.
* pH and conductivity analyzers made by Orion Metler Toledo and Metrom
* Liquid density meters by Anton Paar
* Flash point, pour point, CFPP and Reid vapor pressure testers by Walter Herzog
* Jet fuel testers by Alcor Inc.
* Simulated distillation GC by Analytical controls
* Handled other instruments like automatic viscosity meters, Dielectric tester asphaltene, gum tester etc.
* Carbon and Sulfur analyzer by Rosemount model CSA 5003
Trace Sulfur and Nitrogen analyzers by Antek USA, model 7000 TS
* Micro GC by Varian for hydrocarbon.
* H2S and RSH analyzer in oil and water samples by Metrohm, model 726 and 786
* Antek GC for trace H2S in hydrocarbons
* Hewlet Packard GC Model 5890 and 6890.
* GC for trace sulfur in petroleum samples by Seivers.
* Online process Gas chromatographs by ABB model 3100, 3103,3107 for liquid and gas samples
* Vista work station
* Asoma analyser for sulfur in oil.
* Online conductivity meter

MAJOR ACHIEVEMENTS
* Commissioned two Nos. stack gas monitoring station in MEMO Power plant in Thailand for ABB Milano in March 2000
* Commissioned two nos. of H2S analyzers system in ONGC offshore plat form

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 9785)

Go to Search Parameters...

Brief Description

A Bsc in chemistry with a wide range of experiences in the mud &work over and completion fluid engineering. Able to work on my own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. Presentable, dynamic, adapt

Working as an Electrical technician in Gas purification plant, dealt with zone classified equipments,experience of UPS,PLC,Switchgears,power generation,well head solar control,CP system, fire pumps control,different projects,CMMS,RCM, I have B.Sc (Bachlor of Science) and DAE of ELECTRICAL

4 yrs experience as Pipe Stress Engineer for the Oil and Gas and Petrochemical Industry

Production Operator oil and gas field

Proactive multilingual HSE Advisor/Trainer with 7 years onshore experience in multicultural working environment. Strong interpersonal and presentation skills. Team player with abilities to develop safety programs conducive to results.

Equity Research Analyst, Fixed Income Research Analyst

Coiled Tubing Engineer with strong background in wired coiled tubing applications (E-Coil). Competently served as Coiled Tubing Technical Engineer, Operations Supervisor (personnel & equipment logistics) and Senior Coiled Tubing Engineer. Working knowledge with industry standard software.

Bachelor's Degree (4 years) in Civil Engineering, Construction Engineering, Design and Engineering, Mechanics,Hands on experiance in STAADpro 2006, MathCAD-12, AutoCAD, Smart Plant Review Soft, MS Office

More then 25 years in maintenance

I have more than 11 years of experience in petroleum and water testing in laboratory.

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Panel Operator ( D.C.S & P.L.C systems) Ras Lanuf Oil and Gas processing Company (May 1998-Jan 2008).

Professionally trained creative and farsighted Painting and Insulation Inspector with over 12 years of quantifiable achievement in managing all facets of Quality Control Management in Painting within REFINERIES, GAS PLANTS, PETRO CHEMICALS, GATHERING STATIONS. Possess thorough knowledge in all face

Geophysicist Engineer./ Reservoi -Petrel- Modeller

good handle with unix ,microsoft office,self motivated

Boiler Turbine Generator Desalination Deminerlisation Aux Boiler

Ensure accuracy, programs are to exist for the inspection, testing, calibration, and routine maintenance of measurement equipment and adequate records are to be kept

Free! Large amount of experience in building & maintaining customer relationships. Managing drill and blast contracts safely, and to budget, for a variety of operations.

Scientist with 11 years R&D experience in Fischer-Tropsch catalysis, oligomerization and polymerization.

Experienced Manager in the Automotive and Retail Industries

MSc in Petroleum Engineering, simulation, reservoir engineering, welltest

12 years experience in industrial and general maintenance field.

AutoCADR2004, SolidWorks-2005/2006 & IDEAS V9.1 (3D Master Modeling in Design & Drafting), Microprotol® V32.0 (Software package for Mechanical Design & Strength Calculation of Pressure Vessel & Heat Exchanger), PIPENET (Software for Hydraulic Calculation), KYPIPE (Software for Low Pressure Sewage

Strong analytical skills and knowledge of business practices, Ability to collect and document business requirements, Report Tools (Business Object, Report Developer etc), Relational Database Design and Development including Advance Stored Procedure, Function, Triger, cursor Procesing etc, Data Model

Materials & logistics coordinator with 10 years of hands-on experience in Oil and Gas industry supporting offshore drilling, production, workover operations in CIS countries. Strong knowledge of warehousing; land, air, sea transportation; rigging and lifting; understanding of drilling operations.

10 years experience in, Gulf of Suez Petroleum Company the joint venture partner with BP in Egypt.

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

I am seeking a position as a Medic where my skills, previous experiences and currant safety training will provide your company with a professional medical service. The attached resume details my 24 plus years of military and offshore experience.

Structural engineer

Senior Executive with Board Experience

18 years of experience in operation and commissionng of oil&gas,refinary and petrochemicals.

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

Analyser engineer with 15 years experience

Chemical Engineer, with extensive experience/training in environmental, health, safety and quality management systems. International experience. Fluent in Spanish, English and Portuguese. Management skills.

Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc

Electrical Engineer and MBA with over 12 years Power and Water sector Commercial related expereince

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

Over 15 years of experience with reputed SABIC affiliates & International companies like Flour Daniel , Deutsche Babcock Idea Ltd. , E.I.D Parry Fertilizer & Chemicals and Protech Ltd. in important positions like Mechanical Engineer, Mechanical Superintendent, Manager mechanical etc., with increasi

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

HSE /SAFETY -Engineer /Specialist /Advisor /Officer - with 7 years of experience in Oil & Gas

Process Engineer in WorleyParsons, a leading global company working in oil and gas industries. Briefly, my job description includes performing PFDs, PI&D, Safety review/approval, process simulations, equipment sizing, process calculations, and optimization and conceptual studies.

Directilnal Drilling

Diploma In Electrical Engineering - Worker's Institute of Technology

16 years in drilling and completion fluids, experience and knowledge in cementing too.

PDMS, SP3D, PDS Piping Designer

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out