Resume - Mechanic specialist

Misco Jobs

Resume #25998

CONTACT INFORMATION:
View contact information...

1/ DEGREE OF STUDIES
Senior Technician in Maintenance Mechanic
Diploma obtain: (D.E.U.A)
Application diploma studies university
Especially in Maintenance Mechanic (Rotating Machine Turbine compressor pumps diesel engine)
Period of studies: From 1993 to 1997
Place of studies: University of Batna (Institute of Mechanical Engineering)

2/ WORK EXPERIENCE
1) Work for Halliburton Company (USA Oil & Gas field)
Place hassi mesoud algeria country especially in servicing well
My job obtain was Mechanic Technician especially rotating machine diesel engines, generators (Caterpillar, Detroi, Cummins, Toyota) Truck Cars Teaileurs (Ford150.Toyotaland Cruiser. Dodge.) (Detroi Diesel. Caterpillar. International.)
Also at the same time I was asisting work from shop to operate (C.E.M.S) system, computerized equipment management system.
That was in early 1997 to late 1999

2) Work for Weatherford Company Oil & Gas services (USA) in Hassi Messoud, Algeria
I was Senior Technician (Maintenance Mechanic) specifically for hydraulic pumps diesel engine, deferant models, generators.

Also at the same time, I was a Safety man responsible for the Maintenace Equipement. That was in late 1999 to late 2000

3) Work for Sonatrach –Anadarko (Algeria Govt Corporation, Oil & Gas exploration for 300.000 bpd approximately
In this, my job was a Senior Technician post in Mechanic Maintenace (static and rotating machine) to repair and overhaul maintenance gas turbine, air compressor, gas compressor, deferants pumps, diesel engine.

Also at the same time occupied to repair pressure safety valves (psv) and callibration with bench test manipulation (From 07/07/2000 till date)

3/ JOB DESCREPTION
1. Technician Maintenance Mechanic preventive and overhaul maintenace in Rotating machines

2. Turbine gas (nuvo pignon5002 series.solar2501.thomassen 5001 series.
Maintenance & repair of industrial gas turbines;
Mechanical service support experience on gas turbines;
Specific hands on experience in installation, operation, maintenance, start-up & troubleshooting;
Gas Turbines (Novo Pigeon, Solar Turbines, etc);
I performed boroscope inspections & analyze the results;
I did troubleshooting in advanced driven equipment faults (gas compressors, generators, pumps, etc.);
I have experience in Mechanical Field Service rotating equipments;

3. Gas compresor ( dathum/back to back and lines)
4. Pumps (Horizontal, Vertical, Centrifugal and Rotative) ksb.guinard.john creen.
5. Diesel engine (Catterpilar, Cummins, Detroi, Toyota, Perkins)
6. Air compressor (Atlas copco. many series ga 90.160ff)
7. Pressure safety valves (psv anderson –greendwood.dresser-valves controle)
8. Also good at troubleshooting advanced driven equipment failure;
9. Also perform boroscope inspection and analysis results.
10. Also iwll can use laser aligement (shaft).
11. Reverse allignements (shaft)

04/ NATUR OF WORK RESPONSIBILITY
* Installation Of Rotating Equipment Accessories & Its Machine Parts
* Overhauling, Trouble Shooting & Assembling Completely Rotating& Static Equipments.
* Attending Tool Box Talk To Carry Out The Job Schedule &Discuss About Job Safety Analysis, Way Of Execution, Etc.
* Performing Preventive Maintenance In All Equipments On Their Basis Of Its Time Duration.
* Regular Monitoring Of Rotating Equipment& Its Performance By Condition Monitoring.
* Performing & Preparing Lubrications As Per The Check List.
* Carry Out Shutdown Jobs For Example Of Blinding, Cleaning Of Heat exchangers
* Attending Leak Arresting, Heat Tracing, Filters, Servicing Of Static Equipment And Its Parts.
* Alignment Performed On Belt & Coupling Drive Equipments
* House Keeping Following On The Working Area.
* Take Part In Total Productive Maintenance In Plant Equipments.
* Safety Awareness & Fire Fighting And Awareness About Plant Chemicals.
* Coordinating With Vendors While Overhauling Time.
* Preparation Of Checklist For Performing Preventive Maintenance.
* Work Order Receiving & Carried Out By Using SAP

5/ TRAINNING
D.E.U.A. Diploma University Application: Studies in Mechanic
Maintenace Institute University of Batna, Algeria
During: 04 years
Mechanic maintenace: Engine Diesel, Solar Turbo charged.

During: 6 months
Tyco valves and control pressure: To repair and callibration psv series 200.400.800 Crosby valves.

During: 1 month in (Aberdine) Scotland, U.K
Systran company /training deferant vessel process cpf
Centre proccesing facility, separator, desander, desaulter, etc.,

During: 6 months
Ross Corrosion International: Training in Corrosion & Safety Control

During: 1 month
Rot align laser / prufetchnic company training in alignment systems (shaft).

During: 2 weeks with application.

6/ LANGUAGES:
English: write and speak very good
French: write and speak good
Arabic: write and speak good

7/ OTHER
Interested in widening / gaining knowledge on computer services and all software updates.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5401 to 5450 of 9785)

Go to Search Parameters...

Brief Description

6 years experience on administration with a comprehensive knowledge of clerical experience, reports, database, and onshore work-over rig materials with expertise in maintenance of oil rig materials.

BE( Elect & Instrumentation) / Diploma In Industrial Safety / Diploma In (Elec & comm) with 2.5 yrs of Exp In Steel Plant

material co ordinator/motorman

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I have ~9 years of refinery operations experience ( diversified )

Subsea Controls

Dynamic and result-oriented professional with over nine years’ multi-discipline experience in the Oil/Gas industry. Exposure thus far has amalgamated my strong technical background with the ability to interpret commercial aspects of contracts and project strategies.

Specialized in the Hydrographic Survey, Topographic Survey, GPS / Total Station Survey, Dredging and Off Shore Construction Survey, GIS and CAD data integration, Data Processing and fair sheet production.

Diploma in chemical technology with 10 over years of experience in petrochemical industry , DCS OPERATION(YOKOGAWA CS-3000), FIELD OPERATION,Now as SENIOR PROCESS TECHNICIAN in singapore

Highly motivated and experienced Production Supervisor. Ability to supervise large and small operation teams. Computer literate. Multi tasking ability. Safety awareness within the oil and gas industry. Managment of major emergency

More than 13 years experience in design and operations. Knowledgable in Process Simulation softwares such as HYSIS, PIPESIM, PIPEPHASE and PIPENET and line and equipment sizing calculations. Preparation of P&IDs, datasheets and Cause & Effect charts. HAZOP, HAZID participation.

Mechanic specialist

Welding Inspection, QA/QC Documentation, Pipeline construction, Fabrication and Installation

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

B.Tech in Mech Engg

I've a large idea about oil field industry, and especialy in slickloine operation, I worked in bouth gas and oil wells ,with differents completions...

B.E(mechanial) with skill of autoCAD and CATIA looking for freshers job

POWER SYSTEM DESIGN

To develop myself as a fully capable chemical engineer and to excel to the best of extents in my field of interest i.e. process engineer & management

Monitoring process control loops

I will be graduating this April 2009... hoping to get a job.

Operations, Business Developement, International experience, North Africa, Saudi, Kazakhstan, Russia.

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

I am Bachelor of Commerce with superior working familiarity.

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

i have fisrt degree in chemistry (bsc chemistry), i am a computer literate, i also serve as a prodution manager in aplastic company.

B.E(Petroleum) 4-year degree program.

Instrumentation Technician, Instrument Specialist.

workover & completion supervisor and now working as workover & completion superintendent

I am a qualified IMCA ROV Pilot Technician who has undergone training as a ROV Pilot Technician at IDESS Maritime Centre (Subic), Inc.Philippine and the 3 in 1 Electronic/ Hydraulic/ High Voltage Course at Miralco Foundation Institute Philippine.

Fresh 4 years commerce graduare and seeking jobs in accountints adn finance pls see my resume and contact me.

I have passed diploma of associate engineer in mechanical technology

i have 9 month experience in plc , scada. In company where i am working

B.Sc. in Geology with concentration in Sedimentology and Stratigraphy.

im hardworking, willing to work on overtime, knowledge in computer

I have done my B.E Electronics from a reputable university of pakistan.I have worked on PLC programming,Motor Control,Scada&DCS,Mcroprocessor&Microcontroller.In communication field Digital signal processing & Cisco networking are the field of interest.

First Prev 101 102 103 104 105 106 107 108 [ 109 ] 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out