Resume - 20+ years in drilling and completions including under balanced side trac re-entr...

Misco Jobs

Resume #26289

CONTACT INFORMATION:
View contact information...

RE: Drilling Superintendent/Supervisor

Please find my resume attached for your review. I would be very interested in the opportunity of employment through your company.

My personal and professional focus is on results that are achieved by not only meeting, but exceeding performance expectations. I have over 26 years of experience in the oil and gas industry, including off-shore HP/HT critical 62% H2S operations in Greece, arctic operations in Russia, and desert operations in Saudi Arabia, Algeria, and Libya. I am well acquainted with international employment, and working well with different nationalities is one of my strongest suits. I enjoy the challenge and responsibility of starting new projects and ensuring the job is completed in a safe and cost-effective manner.

I am confident that I can meet the professional requirements of the above position and I look forward to your response.

EDUCATION
On-going Attending seminars on horizontal, under balanced drilling,
LWD/ MWD, casing drilling procedures.
Well Control (IWCF valid to February, 2005).

1972-1974 Southern Alberta Institute of Technology
Petroleum Technology

1970-1971 Sheraton College, Brampton, Ontario
Business Administration

1964-1969 Central Peel High School, Brampton, Ontario
Senior Matriculation in Business

CAREER HISTORY

I have 26 years experience within the oil and gas industry. the last 17 years of which I have been working as a drilling/completion consultant in Russia, Saudi Arabia, Algeria, Libya and Greece. This extensive international and national experience has provided me the opportunity to develop and refine industry expertise in a wide range of areas, including off-shore work, arctic and remote desert locations in both drilling and workover operations.

Nov '03 – Jul '04 LUK OIL/NOR YAN MAR PROJECT
Directional Drilling Consultant
Description
- Drilling depth 4,200m.
- Upper and lower Devonian zones.
- KOP - 500m, EOC - 730m
- MWD – LWD HP/HT – up to 11,300 psi
- Open-hole logging, coring, casing design, two-stage cementing, and stratigraphic evaluation.
- Cost estimating and bid tenders from service companies.
- Analysis of operations to improve cost, safety and engineering down-hole effectiveness.

2001 – 2003 SAUDI ARAMCO/AMAREST
Drilling and Workover Supervisor
Description
- HP/HT "Kuff" gas work over and re-entries.
- 10 Tonne ISP 16-30. - 12 ga. Frac-pac gravel pack ops.
- Open & cased hole logging 15K Drill stem testing.
- CTU procedures utilizing N2, wellhead and BOP testing.
- DTL & PTL/ TD 17.400 FT w/ top drive system, 2000 HP rig.
- Extreme milling operations/ PBR Completions.
- 4 ½" - 7" liner hangars with chrome Van Top HC tubulars.
- HS&E issues, work permits, safety & fire fighting drills.

1998 - 2000 CEPSA/SONATRACH - ALGERIA
Drilling & Completion Supervisor
Description
- Drilled and completed 6 wells to 3 725m (from 42-55 days).
- Oil-based mud system with Centrifuge (invert emulsion 15.9ppg). LSND & Polymer mud systems.
- Open hole logging, coring, casing design, two stage cementing, and stratigraphic evaluation.
- Cost estimating and bid tenders from service companies.
- Analysis of operations to improve cost, safety and engineering down hole effectiveness.

1996 - 1998 CEPSA/SONATRACH - ALGERIA
Field Production Supervisor
Description
- Supervision of all workover, completion programs and design.
- Operations involving snubbing, wire line, TCP perforating. well testing thru separators.
- Inventory control and purchasing of well heads, ESDV & SSSV safety valves, tubular goods, and all down hole tools.
- Pipeline corrosion and repair programs, lease preparation, roads, and water wells.

1994 - 1996 SIRTE OIL COMPANY - LIBYA
Production & Drilling Supervisor
Description
- Drilling to 13,750 ft. - quartzitic sandstone formations.
- HT/ HP operations using Baker Oil Tools.
- Expansion jts. Wire line set packers with stinger assembly.
- DST open and cased hole.
- Utilization of all cased hole logging, cementing, selective acidizing 15-28% HCL and all down hole tool techniques.
- Horizontal completions and workovers.

1990 - 1993 CHRISTIAN INTERNATIONAL – LIBYA
(contracted to Arabian Gulf Oil Company)
Completion & Drilling Supervisor
Description
- Drilled two exploratory wells to 15,000 total depth.
- 36" conductor barrel to 8½" main hole.
- Two & three-stage cementing procedures.
- Open and cased hole logging procedures.
- Good working knowledge of mud systems, solids control and formation evaluation.
- Workovers involving casing liners, permanent packers and gas lift operations.

1988 - 1990 NORTH AEGEAN PETROLEUM COMPANY
Kavala, Greece - Offshore
Description
- Fixed platform in 420m water.
- 61% H2S.
- Average depth per well: 2,820m.
- Dual production/gas injection.
- HP/HT LSND Polymer mud system.
- Responsible for all safety and evacuation procedures on production platform as well as drill deck platform.
- Facilitated all management and administrative reporting such as production logs, workover daily status reports and communications with other departments.

With such a high (61%) H2S count and major 'asphalting' problems, constant wireline and coiled tubing techniques were employed to work with a dual string capacity. Constant corrosion of production strings and casing had us "fishing" most of the time in which I was responsible for the make-up of all down-hole tools.

LOCAL CONTRACT WORK

1984 - 1988 Company APEX ENERGY & GEOSITE
Position Drilling Consultant
Worked for B.P. of Canada
Alberta Energy Corporation
St. Albert Oil & Gas

Company PAJAK LAND & OFFSHORE LTD.
Position Workover and Completions Consultant
Worked for Merlin Exploration, Home Oil, Chevron Canada

Company SOUTH RIDGE PETROLEUM
Position Drilling, Workover and Completions Consultant
Worked for Paramount Resources

1982 - 1984 ARABIAN GULF OIL COMPANY (AGOCO) - LIBYA

Description
- Average well depth 9,800'.
- Reda and Kobe submersible pumps. Artificial gas lift systems (Otis & Petrol).
- Supplies for rigs, bits, drill pipe, fishing equipment, wellheads.
- Daily reporting on and supervising up to 8 service and drilling rigs.
- Teaching national personnel drilling and workover procedures.

1975 - 1980 Company CHALLENGER DRILLING
Position Tool Push, Workovers & Completions

PERSONAL
Interests Travel, sports.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4151 to 4200 of 10923)

Go to Search Parameters...

Brief Description

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

Computer knowledge, documentation, teaching, research works and quick learner.

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Good organizational & management skills and able to work in team environment and independently.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

EHS Management Expert with 14+ years of Experience

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

My training as a professional Accountant, coupled with my three years on-hand experience as an ‘Finance / Operations Officer’. (B.Sc Accounting and PE II ICAN)

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 [ 84 ] 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out