Resume - Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in ...

Misco Jobs

Resume #26708

CONTACT INFORMATION:
View contact information...

To,
The Recruiting Manager,

SUBJECT: Application for the post of Mechanical Supervisor/ Sr. Technician

Dear Sir,

Being given to understand that your esteemed organization is recruiting qualified and experienced staff in the field of Mechanical Maintenance, I wish to forward my C.V. for your kind perusal.
Presently working in Occidental Petroleum Qatar Limited as a Sr. Mechanical Technician
Since November 2004.
Worked with Shell Petroleum Development Company, Nigeria as a Mechanical Supervisor for two years.
Prior to this I was working in the Gas Plant of Conoco Syria Dez Gas Ltd., CSDGL, Syria as a Supervisor responsible for Nuovo PignoneTurbines and Centrifugal Compressor Maintenance for six months.
I have also worked on an FPSO ( Floating Production Storage and Offloading) based at Equatorial Guinea offshore as a Maintenance Supervisor for a period of one year.
Before these short stints in CSDGL and On the FPSO which were due to better prospects I worked in Al- Furrat Petroleum Company Syria as A senior Mechanical technician from October 1995 and later on promoted to a Supervisor from March 1999 till October 2000.
I have a total experience of 16 years after completion of a three-year trade
Diploma from Bharat Petroleum Corporation Ltd., India. I also served in the same
Organization from 1986 to 1995 as a Mechanical Technician.
If my qualification and experience suits your requirement I am willing to be interviewed at your convenience.
Thank you for time and consideration and expecting a favorable reply.

QUALIFICATIONS
ACADEMIC:
Passed Inter Science through Pune divisional board with Maths, Physics and Chemistry as major Subjects.

PROFESSIONAL:
Completion of a three-year trade Diploma in
Mechanical Maintenance from Bharat Petroleum
Corp. Ltd. (1983-1986)

EXPERIENCE:
Worked in Bharat Petroleum Corp.Ltd
(Refinery) since September 1986 to Oct. 1995.
ABROAD: Presently working in Occidental Petroleum
Qatar offshore as a Sr. Mechanical Technician
Since November 2004.

Worked as an oilfield Maintenance
Supervisor in Shell Petroleum development
Company (SPDC) Nigeria since October 2002.

- Worked as a Supervisor for Maintenance of
Turbines and Centrifugal Gas Compressors from
June 2001 to October 2001 in Conoco Syria Dez
Gas Ltd., Syria.
- Worked as Maintenance Supervisor on an FPSO
From Oct. 2000 -June 2001 offshore in
Equatorial Guinea.
- Worked as a Supervisor in Solar turbines Maint.
From March 1999 to August 2000 in Al- Furrat
Petroleum company Syria From October 1995 to
Feb.1999 as a Sr. Maintenance Technician in
Al- Furrat Petro. Company, Syria.

FACILITIES IN GAS PLANT
Gas pant consists of NGL Extraction, LPG fractionation, export gas compression, power generation, ethylene glycol injection, propane purification, hot oil system, fuel gas system and a pre-cooling unit.

DUTIES AS A SR. TECHNICIAN
1) To carry out preventive maintenance as per the Impower system of
Scheduled maintenance.
2) To carry out trouble shooting, break down maintenance and pre-
Ventive maintenance of Rotating and Static equipment's in the gas
Plant such as:

EQUIPMENT MAKE SERVICE

Centrifugal Compressor – Dresser Rand – For Gas compression
Nuovo Pignone

Gas Turbines - Solar
Centaur type H – Power Generation,
- Nuovo Pignone - Gas Compression,
- Alstom, Tornado - Water Injection pump

Air Compressor - Broom wade, - Instrument /Utility air
Ingersoll Rand,
Air Dyne.
Pumps - Union, Gould, - Process requirement
Kerr, Sulzer.

Fin Fans - Hudson - Cooling

Gear Box - Allen, Solar - Reduction between
Solar Turbines and Driven.
Heat Exchanger - Hudson - Gas Cooling

Any other Mechanical Jobs concerned in the Refinery and Gas plant.

DUTIES AS A SUPERVISOR

1) Determine material requirements and order using procurement system such as EMA (electronic material administration), includes raising of MIV (material issue voucher) and MR (material Requisition)

2) Demonstrate problem solving skills both technical and non technical

3) Promote high level of safety awareness, by completion of unsafe act reports / near miss reports/tool box talk.

4) Ability to manage resources, Manpower, materials and equipment

5) Has the necessary skills to analyse plant equipment and process
Problems and develop solution.

6) Maintain daily records, execute the 14-day plan, prepare permit in
Accordance with the permit to work plan, complete all outstanding work orders.

7) Possess an acceptable level of PC literacy.

8) Demonstrate the ability to compile and communicate end of shift workCycle and hand over to a satisfactory standard.

JOB DESCRIPTION:

As a Sr. technician/ Supervisor developed the following skills.

Worked with confidence and independently on all rotating equipment, which includes complete strip down and preventive maintenance of the same.

1. PUMPS:
Makes: Hayward Tyler, Gould, Nuovo pignone, Kerr, Sundyne,
Stork Pacific, Sulzer Bingham etc.

Trouble shooting and fault findings on pump failure.
Overhauled all types of pumps such as Centrifugal, Reciprocating and Rotary pumps.

a) Obtaining a complete check list of the dismantled equipment and
Keep a record of the same.

b) Inspect the condition of rotating parts namely shaft, sleeve, impeller,
Oil deflectors, coupling and stationary parts such as casing, stuffing box, distance piece, and bearing housing.

c) Renewal of Mechanical Seals, checking wear ring and throat bush
Clearances.

d) Maintaining the required float in multistage pumps, check end play.
e) Checking the endplay, squareness and concentricity using a dial guage while pump assembly.
f) Hydro test of pumps to determine mechanical seal and casing leaks.

2. MECHANICAL SEALS:

Makes: John Crane, BorgWarner, Flexibox.

Refurbished all types of single, double, tandem and cartridge seals, Having single, multi-spring and bellows.
Renewed packings, seal faces and maintained operating length lapping seal faces to the required finish.

3. GAS TURBINES

Make: Solar Centaur type H split shaft and single shaft, Solar Saturn
Generator sets.
Alstom Tornado Duel fuel twin shaft
Nuovo Pignone twin shaft.
PLC: Enhanced 5/20, 5/15

Involved in minor, intermediate and major servicing and inspections.
Familiar with fault diagonistics, repairs and overhauls of auxiliary equipment, trouble calls and instant response.
Knowledge of basic turbotronic 2.0 using Allen Bradley PLC

Carried out Combustion Inspection, hot gas path inspection and also involved in complete strip down and change outs of HP and LP rotors
Of Nuovo Pignone Gas Turbines.

1) Periodic servicing of gas Turbines which includes replacing filters of lube oil, fuel electohydraulic start system and enclosure/ intake duct.
2) Inspection of Igniter plug, torch assembly, fuel injector and bleed valve
3) Simulation of Inlet Guide Vanes to check for max / min open.
4) Borescopic inspection to determine condition of stator, rotor blades
And Combustion chambers.
5) Water wash of Turbine, note the following prior to and after Water wash, a) Turbine Rotor speed b) Ambient temperature c) Engine T5 temp d) Compressor discharge Pressure (Pcd)
e) Simulate Ngp speed, T5 temperature and check operation of back
Up overspeeds switch using Solar test Kit.

TROUBLE SHOOTING:
Trouble shoot problems in the package with the aid of Allen Bradley programme such as:
Fail to ignite, Fail to start, Fail to crank, T5 temperature hi, Lube oil
Pressure low, Ngp overspeed, Npt break away, fail to accelerate, does
Not change over to liquid, Hunting, Failure of magnetic speed pick up etc.

Carried out engine change out after 35,000 hrs running.
Alignment of Turbine and compressor in case of Mechanical drives,
And turbine and gear box in case of generators

4. CENTRIFUGAL COMPRESSORS
Make: Dresser rand 2508B, Nuovo Pignone.

Involved in complete strip down and re assembly of centrifugal compressor.
a) Removal and assembly of Rotor bundle.
b) Inspection of diaghpragms, diffuser, thrust and radial bearings.
c) Maintaining overlap and axial float between stages d) Renewal of 'O'rings.
e) Locate position of rotor assembly and proper installation of gas seals.
f) Removal and reinstall journal bearings, thrust bearings and thrust disc.
g) Fit back Rtd's, axial and radial probes h) Use of special tools for Bundle removal /installation.

5. AIR COMPRESSORS
Make: Broomwade, Ingersoll rand, William and James, Atlas Copco.

Preventive maintenance and complete overhauling of compressors used for instrument air, utility air and to produce Nitrogen a) Replacing piston rings, guide rings, rod packings and adjustment of
TDC and BDC.
b) Replacing main bearings and big end bearings.
c) Refurbishment of suction and discharge valves.
d) Renewal of cylinder liner.
e) Worked on the unloader device of compressor.
f) Refurbished screw compressors.
Trouble shooting such as long interval between load and unload, low lube oil pressure, psv releasing, belts breaking, cooling water pump fault, inter cooler and after cooler leakage.

6. DIESEL ENGINES
Make: Caterpillar, lister, perkins.

Preventive maintenance and strip down of diesel and gas engines.
a) Fault diagonistic after compression test to detect leaking piston rings,
Valves, head gaskets or excessive carbon deposits on combustion chamber.
b) Renewal of cylinder heads, piston, liners, connecting rods, bearing and seals.
c) Check axial float, crank deflection, cam shaft, flywheel and turbo
Charger.
d) Adjust valve lash and replace Fuel injectors.

Periodic maintenance of diesel engine which involves changing sump oil,
Air filters, breathers, oil filters and radiator coolant.

7. GEAR BOX AND FIN FANS
Worked on Gearboxes, checking condition of low speed and high-speed shaft gears.
Check backlash and axial float.

Worked on Fin Fan coolers in the refinery and Gas Plant.
Motors to fan pulley alignment, replacement of belts, alter blade angle and routine maintenance.

8. VALVES:
Make: Cipeg, Cameroon, Argus, Crosby, Valgrove and Powell.

Overhauled all kinds of valves including Gate valves, Globe Valves, Needle valves and pressure and safety valves.
Renewal of valve seats or lapping of seats, change packings, caliberate and set required pressure for pressure and safety valves.

9. STATIC EQUIPMENTS
Worked on Static equipments such as Heat Exchangers, Columns and Vessels. Assisted in removal and refit of Tube bundle.
COURSES ATTENDED:

a) Five days Solar Centaur Turbotronic 2.0 Field Maintenance and Trouble shooting.
b) Seminar on Seals by John Crane c) Rotalign laser alignment.
d) Permit to work e) Fire fighting f) Breathing Apparatus g) Gas testing
I) Helicopter Underwater Escape Training ( HUET)
j) Basic First aid Course k) Swimming Test, SPDC Water Borne Operations Permit.

I wish to be considered as a candidate for the post Of Mechanical Supervisor/ Sr. Technician.

I have furnished my details for your kind perusal.

If selected, I assure you to serve with hard work and to the best of my ability.

Awaiting for a favorable reply

Thanking You.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4651 to 4700 of 9785)

Go to Search Parameters...

Brief Description

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

8 years experience in reviewing Isometric drawings, P&ID, Process Flow Diagram, General Arrangement Drawing, As-Built Drawing etc. and Joint walk with client for X-RAY / NDT, Hydro testing, Flushing, Re-instatement, Painting, Test packs to be cleared after Erection

Electrical engineer with 2 year experience

Piping desiner and profissional in PDS software.i have 8 years experiences in oil and gas projects.

2.2 Years of EXP on Primavera, MS-Project, Pro/E wildfire 2.0 and AutoCAD

Over 28 years in the oil and gas industry.

Considerable experience in Maintenance Engineering Division for Oil and Gas industry with major Production Petroleum Company in Egypt as a Maintenance Planning and scheduling Engineer as a Maximo Data Gathering and Analysis Consultant with B.P (British P

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Mastering on ANSYS , MECHANICHAL DESKTOP,TEKLA,PDMS

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

A state Engineer in refining

I have 7 years of design and construction experience in power, petrochemical and oil & gas industry.

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

I have good Communication skills, good software ability and talent to Drilling , Completion and production jobs.

Design Engineer with 2 1/2 Yr exp in control valve and flow element manufacturing industry.

Engineer with 3 years of experience in instrumentation

Working as engineer in field of chemical. i had started my carear as tranee recently a am working as asst. engineer in field of process ,design & erection.

M.E Instrumentation Engineering, PLC, DCS, Labview, Matlab

I have been in the drilling industry for about 12 years. For the last 4 years I have been working offshore in Doha, Qatar. For more than 2 years I have been a toolpush on a Friede & Goldman jackup here in the gulf. I am seeking a position as a wellsite supervisor.

Shutdown Planning, sheduling

I am a 3rd Class Power Engineer with an Operator 1 ceritficate. I have worked in the Oil and Gas sector for 6 years, from well servicing to field operating and onto midstream operator, where I have been a plant operator, trainer and on the panel. I also have 20 years experience as a manager.

Awareness of technical/ QC requirements, Work as a site based QC inspection coordinator, Interpret standards, codes & regulations, comment on supplier documentation such as inspection & test plans (ITP’S) , NDE and testing procedure, site surveillance report(SSR) and non conformance reports(NCR),

Has more than 3 years work experience in the field of Instrumentation and Control performing Detailed Design with application software such as Plant Design System for Offline Modeling, Stat-Soft and Drawing Manager, Autocad, Microstation for Instrument Location Plan, Junction Box Loading, INtools f

B.E in EEE with 2+ Years of experience in High voltage substation design

I am a Postgraduatre in Petroleum Geochemistry which I have completed from Newcastle University,England,United Kiongdom.I have finuished my Bachelors in Petrochemicakls and acquired a very good score as well.I have included all my skills and qualification below

B. Tech, Installation & Commissioning and maintenance of hydrographic survey equipment including DGPS with 3 yrs experience

Gas Plant Operations Specialist

Petroleum Engineer with 3 yr of Exp : Exp in Production Optimization, Gas Lift Optimization, Workover, Material Balance, Decline Curve Analysis, Stimulation and Reservoir Studies, Reservoir Simulation

Having exp. in plant operations of petroleum refinery & petro chemicals.Having commissioning exp. in refinery sulphur recovery unit

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 [ 94 ] 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out