Resume - 21 Years Petro/Chem construction industry, including four years in a fabrication...

Misco Jobs

Resume #26795

CONTACT INFORMATION:
View contact information...

DISCIPLINE:
Certification Engineer (Project and Non-Project Certification and Mechanical Completion).
Senior Document Controller – Major Projects

SUMMARY OF WORK EXPERIENCE:
21 Years Petro/Chem construction industry, including four years in a fabrication facility, together with offshore maintenance and post hook-up projects. I am currently almost eight years in Qatar with Qatar Petroleum as a Senior Document Controller solely responsible for two Major Projects from FEED to EPIC phases (one completed, one ongoing), working in QP offices, Contractors Home offices and the construction sites. I am currently working on the Epic stage of the latest project based on the site.

EXPERIENCE INCLUDES:
Presently and for almost the last eight years engaged as a Senior Document Controller and solely responsible for two Major Projects. This includes working in QP offices, Contractor Home Office for design phases and site offices for the Construction phases. My duties included writing the document control procedures for the projects. Responsibility for the running of the DCC Facilities and personnel and all Document Control related Issues wherever the DCC was based. Had a major input towards the Corporate Document Control Procedure for Major Projects. Liaising with all levels of Management within QP and the Contractors facilities. Producing all salient status reports (including graphs and bar charts) relating to receipt, despatch, overdue for all documents/drawings/correspondence received/despatched by DCC for the management review. Ability to work independently with minimum supervision.

Previously engaged in Construction and commissioning certification, writing construction procedures, inspection and test plans, inputting of all QC requirements onto job cards, document control, certification dossiers, As-Built dossiers (piping, structural, instruments, electrical, civil etc.). Scope of Work, Design Dossiers, Mechanical Completion Dossiers, Hydrotest Packages, Welding Inspection, QA/QC and all relevant procedures. Preparation of BOM's and material take off.

Ability to read and understand GA's, P&ID's, ISO's, MTO's and interpret Piping Specifications, together with weld detail drawings. Ability to prepare 'As Builts' from own offshore surveys. Able to draft Isometric and Pipe Support(s) sketches.

Experience of Project and Non-Project Administration, Onshore and Offshore Logistics, Time Sheet and Job Card Control, Material Control, Office Management and Procedures and Supervision of various numbers and levels of staff.

Experience of attending meetings with and on behalf of the Client and Contractor which involved decision making, planning, organisation etc. and also the ability to take down Minutes. Liaising with OIM's, Offshore Construction Superintendents, Offshore Safety Personnel and Medics. Liaising with the Certifying Authority, both on and offshore. Liaising with all engineering disciplines, including planning. Liaising with Project Managers and Construction Managers.

Experience of using computers, both PC and Network – Excel and Access Data Bases

Practical technical aptitude with excellent interpersonal and communication skills.

OBJECTIVES:
To find a permanent position or long term contract where the above skills can be fully utilised. Willing to relocate or work anywhere in the UK or overseas.

SUMMARY OF POSITIONS HELD (PETRO/CHEM INDUSTRY ONLY)
1 August 97 - Present
2 July 96 – 1984
Senior Document Controller with Qatar Petroleum (QP) Major Projects
Various Certification Engineer & Document Controller positions.

EDUCATION QUALIFICATIONS:
Certificates/Qualifications Gained:
RGIT Offshore Survival Certificate
MAPS
HNC - Legal Services, Higher Physics, Higher Maths, Engineering Maths, Communication Studies, Engineering Drawing, Welding Inspection and Quality Control.
Tops Course in Computer System Analysis.

PREVIOUS/CURRENT EMPLOYMENT:
April 2003 – Present Qatar Petroleum (QP) - Qatar
Rag and Flare Mitigation Project – FEED & EPC
Senior Document Controller – Solely responsible for all issues relating to Document Control. My duties being to write the procedures for the document control aspect of the project. Responsible for writing the administration instructions for the document control sections of the current and previous contracts. Assisted in the collation of the Corporate document control procedure for Major Projects within Engineering Business. Reviewing all document control related issues, procedures etc presented by Contractor/Consultant. Plan and manage the development of the project document control systems. To provide optimum service to the Project Task Force. Provide support services to the Project Task Force and participate in collating and reporting of information related to the status of the project's documents, drawings and correspondence throughout the life cycle of the project. Maintain, update and review comprehensive databases, including Technical documentation, correspondence, drawings and specifications/standards corresponding to those of Consultants, Contractors, Suppliers, Vendors and Manufacturers documentation.

Effectively to control, report and ensure all duties are carried out within an established procedure, including resolution of out standing issues relating to Projects Documentation, drawings and correspondence with Lead Engineer Project Services and concerned parties.

Aug 97 – April 03: Qatar Petroleum (QP) - Qatar
Artificial Gas Lift Project – FEED & EPC
Senior Document Controller – Solely responsible for all issues relating to Document Control – Duties as above.

July 97 – 1984 Kvaerner Aberdeen
Certification Engineer

Shell UK Exploration and Production
Brent Long Term Field Development
Certification Engineer - Construction and Commissioning

Ralph M Parsons, St Fergus
(Site Managers for MNSL, Sage Project)
Certification/Document Controller

Mobil North Sea Limited
Documentation Controller

Occidental Petroleum
Certification Engineer

Shell UK Exploration and Production
Onshore/Offshore Administration Controller

Amoco UK Exploration and Production
Documentation Controller

Hydrocarbons GB Limited
Document Engineer

TOMEC
Certification Engineer

Occidental
Documentation Engineer/Administration/Logistics

AOC International
Project Co-ordinator

AOC International
Materials Controller/Document Controller

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 10902)

Go to Search Parameters...

Brief Description

Well technician

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

21 Years Petro/Chem construction industry, including four years in a fabrication facility, together with offshore maintenance and post hook-up projects. Working as a Certification Engineer for many years prior to my current post. I am currently almost eight years in Qatar with Qatar Petroleum

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

I have 14 years of experience in Human Resources Management, Business Planning, Sales, and Customer Service in leading organizations in Egypt and abroad.

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Two years pipeline experience, a pipeline engineer with course done fron indian institute of technology bombay.

TRA-WIPPER

Electrician and Electronics Technician, with military and civilian experience

Machinist- licenced

Over 15 Years of rich experience in Engineering Procurement & Construction projects for Oil , Gas , Petrochemical , Power Plant & Ports .

I am engineering graduate in Mechanical from Shadan College Of Engineering, JNTU, India having around 7 years of experience in the field of Electronics/Mechanical related with Projects/Maintenance. I joined Saudi Perfume and Cosmetics Industry-Jeddah, one of the largest manufacturer of perfume.

Title analyst. Mapping. Curative. Leasing.

good enogh in english, good techinical skills.

Contact Details Personal Profile Professional Profile Academic Qualifications Non-Academic Details Computer Abilities Work History Detailed Working Experience.

Mechanical project engineer with 3 year experance

Document Controller, 3 years Experience with Professional Degree

COATING INSPECTOR CV

Bachelor of Technology in Chemical Engineering from Govt.Engineering college Thrissur, Kerala, India. (2002-2006).

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

Instrument Engineer

B.E., MSc, Chemical Engineer, Project: Nitrate and Nitrite Remediation of Microbially Influenced Corrosion and Souring of Oil Reservoirs due to Sulfate Reducing Bacteria

VSAT Field Technician, Schlumberger

CAD CAM PLM TECHNICAL SUPPORT

I am Electrical Diploma holder. I have 10 Years of professional experience in Drafting in Building Service like Electrical, Fire Detecting, And Public Address System. Also Familiar with Indian standards as well as international codes such as BS, NEC, IEE Regulations & NFPA for Building Services.

An enthusiastic HSE Advisor with a background in the Oil & Gas and Major Construction Industry.

Involved in the Designing system Architecture, Interconnection and developing Graphics, I/O & System engineering for the control system, Engineering & Commissioning of industrial automation plants with integrated testing of DCS at plants.

Significant experience gained in the welding and fabrication industry. Working Petro chemical plants, oil and gas, pipeline & fabrication yards in Middle East (Kingdom of Saudi Arabia) and India. Welding Inspector (3 Years and 6 months), taking full responsibility for production welds made on site.

1999-2004 Master student of the Technical University of Cluj-Napoca, Control Engineering and Industrial Automation Department. Graduated in June 2004, Language of study: English. Experience in Siemens Simatic, Siemens WInCC, SCADA

personal info/qualifications

I am a very skilled Planning Engineer with a great experience in Primavera P3 (10 years) and Primavera Enterprise P3E

production engineer for the Lagomedio Unit at PDVSA E&P.He worked in Maracaibo Lake’s oil fields developing in different positions. He holds an engineering degree in information engineering from the UNITEC, Venezuela, and a Minor in Reservoir Engineer in “CIED”, Maracaibo, Venezuela

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

qualification: B.E (Chemical Engg.) Industrial Training: Cipla ltd. (one month)

Electrical Fitter with experience as a Condition Monitoring Technician/Project Manager since 1994. Highest skill level in Predictive Diagnosis. (Vibration Analysis, Oil Analysis, Wear Debris Analysis, Thermography, Ultrasonic Detection, High Voltage and Low Voltage motor testing).

Formation damage, workover candidate selection, hydraulic fracturing, production optimization, R&D for drilling, completion and production enhancement based on nano-technology, coiled tubing, matrix acidizing, acid fracture, cementing, multiphase flow simulation and programming.

I am a Bachelor degree holder in Computer Information Systems from Ajman University of Science and Technology in Abu Dhabi / UAE 2002 with excellent Analysis, Developing and English communication skills. I feel that I could be very useful to fulfil the work you are doing within your departments.

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

Totco Institute of Secretariat Studies .Diploma in Computer Science. Ladoke Akintola University of Technology, Ogbomoso.B Tech in Chemical Engineering Oil and GAs recording Using Oracle Database Programme. Calculation of deferment in Oil and Gas Computation Well Test monitoring and surveillance.

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objectives: As a mechanical engineer I am: - seeking an engineer position in oil & gas Industry - willing to get field experience and use gained knowledge in practice - able to study new equipment and technologies - looking for a new career opportunities

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out