Resume - Mechanical Engineer with proficiency in IDEAS, Nastran

Misco Jobs

Resume #26872

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
A full-time position in mechanical engineering utilizing design and analysis experience along with effective teamwork and interpersonal skills.

SUMMARY
* 3000 hours of MatLab experience
* 800 hours of IDEAS Analysis experience
* 500 hours of FEMB experience
* 200 hours of PRO-E, ANSYS, NASTRAN experience

EDUCATION:
Master of Science in Mechanical Engineering
2005
University of Cincinnati, Cincinnati, Ohio
GPA: 3.7/4.0

Bachelor in Mechanical Engineering
August 1997 – July 2001
University of Pune, India
First Class with Honors

PROFESSIONAL EXPERIENCE:
I) Structural Analyst (intern) February 2005 – May 2005
Belcan Engineering Group, Cary NC

* Projects undertaken:
1) Finite element analysis of Axle casting Analysis using SDRC IDEAS. (Caterpillar Inc.)
* Performed 3-d and 2-d axis- symmetric finite element analysis for design support and analysis documentation.
* Created parabolic tetrahedral elements with higher element density at the bearing support.
* Represented the shaft as beam and connected to the axle casting using rigid spiders and gap elements to simulate roller bearings.
* Determined the stresses at the bearing supports, which result from the applied and induced loads, also provided a comparison of these stresses with the corresponding material allowable using appropriate theories of failure.
Tools: SDRC I-DEAS (v.11 m2)

2) Adaptor plate analysis (Small Wheel Loader), (Caterpillar Inc.)
* Imported and de-featured the model for meshing.
* Created a mesh using parabolic tetrahedral for the housing and extruded linear quadrilateral elements to form brick elements for the plate.
* Used spring elements and rigid spiders to support the engine and 3 pumps.
* Lumped masses were used to represent engine and pump at the respective CGs.
* Applied the loads and performed modal analysis and G-loads analysis to obtain the frequencies and stresses.
Tools: SDRC I-DEAS (v.11 m2)

3) Stick Analysis (Small Wheel Loader), (Caterpillar Inc.)
* Used quadrilateral, triangular and brick elements to create the FE model.
* Embedded 1 row of shell elements to simulate the weld.
* Modeled the doubler plate as shells and connected it through perimeter weld by extruding element edges and merging nodes.
* Applied the boundary conditions and observed the Von Mises Stresses.
Tools: FEMB, Nastran

4) Backhoe Loader Hood Analysis (Caterpillar Inc.)
* Created the finite element model using triangular and quadrilateral elements.
* Represented the welds by merging the nodes, and rigid spiders (RBE2) were used to simulate bolts.
* Performed non-linear static analysis to determine the load that will cause yielding of structures.
Tools: FEMB, Nastran.

II) Mechanical Engineer
08/2001 - 07/ 2002
Span Filtermist, Pune, India
Performed project titled 'Combination Filter Using Cyclone Dust Collector and Centrifugal Mist Separator'
* Designed and manufactured a Dust separator which would prevent machine dust from entering the mist separator which was designed to convert coolant mist back to liquid form.
* Conducted research in the field of cyclone and built an experimental cyclone dust separator
* Obtained data and formulated equations required to build the cyclone at smaller size as compared to those built in industry
* Modeled the separator in I-deas and analyzed for stresses using Ansys
* Achieved a final outcome where 80% of the chips were separated from entering the mist separator

Research Project:
September 2002 - February 2005
University of Cincinnati, Cincinnati, Ohio

1) 'Tradeoff analysis in minimum volume design of multi-stage helical gear reduction units'
* The principal aim is to present a generalized optimal design formulation with multiple objectives which is applicable to gear train of arbitrary complexity.
* Formulated the constraint equations and objective functions necessary for the optimization algorithm.
* Implemented Monte Carlo method for generation of random numbers required for starting vector.
* Generated Pareto Curves for 2-stage, 3-stage gear trains.
* Analyzed the tradeoff between surface fatigue life and volume of a three stage gear train using weighted sum method.
* Implemented Lp Norm Method to obtain best possible design from a large pool of available solutions.
Tool: MatLab

2) Modeling of Butterfly Valve
* Modeled the assembly using Pro-Engineer (v 2000 i2).
Tools: Pro-Engineer

3) Design and analysis of periodic shaft for gear mesh vibration control
* Performed literature survey in this field.
* Developed a MatLab code for the uniform shaft and periodic shaft using finite element techniques and observed 20% attenuation in the vibration response at the bearing supports due to periodicity.
* Modeled and analyzed a periodic shaft using ANSYS to validate the results.
Tools: ANSYS, MatLab

4) Modal analysis of rotor.
* Calibrated the hammer, selected and located the sensors to complete the set-up for the test.
* Collected response data for impact testing of unbalanced rotor using UC- X-Modal software
* Measured SIMO responses using HP- FFT VXI Analyzer
* Tracked order using MAP Demo (UC –SDRL) software
* Generated the report and presented the results in front of 60 people.
Tools: Xmodal, Mapdemo, MRIT.

COMPUTER SKILLS:
Platforms: Windows 95/98/2000/NT/ME/XP
Programming Languages: C, C++, MatLab, HTML
Application Software: PRO-E, I-DEAS (certificate course at UGS, Milford, Ohio), FEMB, ANSYS, Nastran, AutoCAD, M.S Office

AVAILABILITY/ RELOCATION:
* Available to work full time within two weeks.
* Willing to relocate anywhere in United States.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 9905)

Go to Search Parameters...

Brief Description

Free! I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Wide experience as HSE Coordinator as well as Safety Manager on several construction projects in live plants and heavy construction sites.

Lead Engineer for Aramco Transmission projects and Systems integrator also for Various overseas projects.

Senior Contracts Administrator currently working for EPCM company. Hold dual citizenship (Australian and Canadian). Highly organized, strong work and business ethics. Hold 4 year degree in business administration (Bachelor of Commerce). Administered both Engineering and Construction contracts.

skills and qualifications include: Commercial Diving, Underwater construction I am skilled in all kinds of works underwater, pipeline inspections and repairs, flange ups, Locating, equipment maintenance. welding, burning, non destructive testing levels 1 and 2. and underground coal mining.

MECHANICAL ENGINEER

I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions.

Developement,depillaring with syowing,shortfirng,spporting,ventilation,surveying,

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Shift in-charge (Production Operator) & Maintenance Engineer-Electrical, 5+years experiences, MSc Power Engineering, Chalmers Technical University, Gotenborg Sweden, Management training, Computer operations (Windows application software, comsol multiphysics, Mathlab) skills, Plant safety training, p

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Scaffolding Engineer : Sales & Project Management, 6+ Years Exp

Experianced Petroleum Graduate

Educational in Mechanical Engineer, as well as in miscellaneous personal studies that I had attended(i.e. Safety & Health Officer, French Language, Japanese & Mandarin Language).

Accountant with data analysis and auditing skills, able to create Applications for Database and all Financial Systems,able to manage any recruitments at any field

Technical, Managment, communication. Skills

Enviromental Process Engineer/Technician

PROCUREMENT / MATERIALS / LOGISTICS / STORES

Operations Manager; Telecommunications; Administrative; Business Development

Document Control / Project Administrator

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

To use and hone my technically organize skills, knowledge and experience to Attain excellence in the industry by providing total customer satisfaction in field of mechanical Industry.

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

Control room and plant operator, 10 + 2 +3 yrs of education, adequate computer knowledge, reciprocating,centrifugal pumps and compressors, handling DCS systems, experience-2yr 3 months in Oman,

Mark up Leading hand, Blast crew member, Westrain Plant Operator Training Course

Bachelor of Science in Mineral Engineering, eight years experience as a project/test manager for the explosives and ammunition testing industry. looking to transistion into the mining industry.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

NSW Electrical Contractors Licence, OHS Safety Consultant Ticket, Qualified Electrical Fitter-Mechanic, Senior First Aid trained.

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

3 years of safety experience and seeking more.

I have about 2 years experience as a Geologist.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Journeyed Industrial Electrician

Management, business, trading, oil and gas, adminstration, HR, petrolium

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Experience: Planning RC & DD drilling - Logging / Surveying & GIS / Sampling / Data modeling. Positions: Offshore geologist / field geologist / Project kimberlite geologist (Namibia & Angola).

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out