Resume - Shift supervisor at worlds largest butane to maleic anhydride facility. Qualifie...

Misco Jobs

Resume #26888

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking position as a chemical plant operator or technician.

QUALIFICATIONS
Qualified as a butane to Maleic Anhydride field /control room operator, and shift leader.
Operate area equipment to include; reactors, air compressors, absorber columns, fractional distillation columns, batch operated refiner column, podbeilniak extractors, associated pumps and utilities.
Responsible for Maleic Anhydride production facility on shifts.
Supervise plant operators and provide troubleshooting and guidance on process problems.
Responsible for order fulfillment, and finished product movement by railcar and tank truck.
Use SAP for shift payroll and product transportation.
Participate in operator training and retraining.
Ensure plant operates within environmental permits ie: HON, TSCA, state and federal requirements.
Coordinate with maintenance on equipment shutdown, repair.
Supervise plant operations to ensure finished product and raw materials meet specifications.
Participates in area HAZOPs.
Initiate hot work permits, confined space permits and permits to work.
Operations representative on area Six Sigma team.
Operate area equipment to ensure compliance with Process Safety Management program.
Qualified in minor maintenance

EDUCATION
1989-Pensacola Junior College chemical operator course
1986-1987 US Army Aircraft Electrician and Instrument Repair Course
1983-US Army Atomic Demolition Munitions Course
1982-US Army Combat Engineer Course
1978-1982-Escambia County High School

RELEVANT EXPERIENCE
2001-Present Shift Leader, Huntsman Corporation Maleic Anhydride facility Gonzalez Fl.
1992-2001 Plant operator, Huntsman Corporation Maleic Anhydride facility Gonzalez Fl.
1990-1992 Tire yarn spinning operator, Monsanto Company Gonzalez Fl.
1986-1989 Aircraft Electrician and Instrument Repair, US Army,Ft. Lewis Wa.
1982-1986 Atomic Demolition Munition Specialist, US Army Ft. Hood Tx.,Hanau Germany

OTHER EXPERIENCE
Participated in training and start-up commissioning of Maleic Anhydride/Butanediol plant in Kuantan Malaysia 2003.

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3251 to 3300 of 9785)

Go to Search Parameters...

Brief Description

Oil Executive

Reliable, Honest, Ethical

Free! Almost 20 years experience in Supply Chain i.e. Procurement, Expediting, Materials Control, Logistics & Operations within the Oil & Gas, Drilling & Exploration, Construction & Maintenance, onshore/offshore experience in the UK and overseas

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

5 YEARS EXPERIENCE AS PLANNING ENGINEER IN OIL & GAS FIELD CONSTRUCTION + EXPERT IN PRIMAVERA SOFTWARE

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

BE Chemical Engg. Experience in Multinational Storage terminal Ship loading/ unloading of Acids, petrochemicals and LPG.

I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant.

Information systems - Analyst /Programmer/Project leader/Business Analyst

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons.

30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

Last employer: Lidl Ireland Ltd. as District Manager. International experience

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Geodesist/Land Surveyor/Geomatics/GIS consultant

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore.

International Finance Manager with extensive experience in the upstream oil and gas business.

Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai.

29 years oilfield experience from roustabout to site manager.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 [ 66 ] 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out