Resume - Self-motivated young competent Mechanical Engineer with nine years experience wi...

Misco Jobs

Resume #26939

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To get a challenging, full-time senior level position in a dynamic organization, in the Mechanical industry, utilizing my ability to work as team member and contribute to support. Where I can effectively put to use my qualifications, experience and skills.

PROFESSIONAL EXPERIENCE (nine Years)
Senior Engineer- Since February 2004 to till date
Punj Lloyd Limited.

Project working on: MP Gas compressor for offshore facilities, Kalimantan timur, Indonesia.
Pt. Punj lloyd Indonesia/Mp Gas Compression Facility for Total E & P Indonesie at Senipah, East Kalimantan, Indonesia/ Piping Engineer Manage the fabrication, erection and pre-commissioning of complete piping activity in the project.

Mechanical Executive – From August 2000 to January 2004
Larsen & Toubro Limited Gr. II Project.

Project working for: SBAF Project, BPCL, Mumbai (Cap. 2 x 70 TPD)
Working as a Lead Piping Engineer for Sulpher Recovery Unit (Refinery modernization project) in BPCL Refinery, Mumbai. The job is including total Piping & Mechanical works for SRU/ARU/SWS I & II & FGTU. Plant for SRU.

Project working for: SDU Project, IOCL (AOD) Digboi (Cap. 0.33 MMTPA)
Working for Solvent De-Waxing Unit Project Site at IOCL Digboi as a lead engineer piping execution to expedite the piping execution, which was on the critical path in view of the time and site constraints. Digboi was a tough site
Where Construction was first time being directly supervised by Gr. II Projects and also because of its geographical constraints.
Spearheaded piping execution, with a team of only 4 piping engineers including myself, to get back the control over the piping erection and mechanical completion and hydro testing. I was involved in day-to-day monitoring and planning of hydro test loops and also liquidation of technical audit and other checklists in close coordination with client and PMC.
Assisted the process engineer in setting up of the procedure for the piping and equipment clearances for pre commissioning. Also assisted process team for various checklist liquidation and speeding up of flushing and boxing up activities.

Mechanical Engineer – From April 2000 to July 2000
Mukand Engineers Limited

Project working for: LPG Recovery Project
Working for LPG Recovery Project Site at LPG Recovery Project in GAIL Gandhar (Gujarat). The job is including total Piping & Mechanical works for Regeneration gas Heater for LPG I was involved in Fabrication, Erection & Alignment of Radiant shell, Convection section, Arch plate, End tube sheet, Stack cone & Coils.

Piping Engineer – From July 1998 to March 2000.
Larsen & Toubro Limited Gr II Projects

Project Working for: Hydrogen Unit (Cap. 25000 NM3/Hr.)
Working for Hydrogen Unit Project Site at IOCL Baroda as a engineer Piping execution to expedite the piping execution, I was Involved in Following activities v Execution & monitoring works in Piping v Involvement of 100,000-Inch dia welding and 15,000-Inch Meter U/G Under ground systems up to 16" (with the following of Wrapping Coating),
Erection of Pigtail tube & catalyst tube.
- Pre–fabrication and Erection of Piping in Process, Utilities & Fire fighting.
Following & studying of GAD's, Isometrics & P & ID's in the process Area.
Mechanical Completion of Works Inspected by EIL Standards.
- Involvement of Painting, Insulation & Hydrotesting of Piping Loops as per EIL Standards v Pre-commissioning Activities of Flushing of Piping Systems & Charging of Utilities.
- Reconciliation of Piping Material including field Measurement of works
Handing over of Spare & Surplus Material and Correlation with client.

ASST. ENGINEER – From July 1996 to April 1998.
Apex Electicals Limited (Baroda)

Working For: Shop Fabrication
Working as a Asst. Engineer with M/s Apex Electricals Limited. (ISO 9000 organization) in Baroda (Gujarat). The job is including total Fabrication of Transformer Tanks & Vacuum test of Tanks.

IMPORTANT JOB HANDLED
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Hydrogen Unit for IOCL Baroda v Fabrication & Erection of Regeneration of Gas Heater for GAIL Gandhar.
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Solvent De-waxing Unit for IOCL (AOD) Digboi.

Responsibilities held in construction and contracting firm.
Execution of projects right from conception stage till handing over in a professional and systematic manner.

- Invoicing/contractor invoice clearing.
- We shall also prepare erection procedures for submission/approval to Customer and for implementations by sub-contractors for important activities v The entire plant may be split into sub-systems. He shall intimate to the Customer as and when the sub-systems are mechanically completed for his punch listing and arrange for liquidation of the same.
- On completion of the pre-commissioning, We shall intimate to the Customer about his readiness for commissioning of the plant and obtain Mechanical Completion Certificates as per the conditions of the Contract.

- Coordinating the construction activities and Progress Monitoring by day-to-day interaction with Customer/ Consultant, Engineering Office and Construction Sub-Contractors.
- Finalization of Milestones in Construction Billing Schedule for LSTK Projects and Invoicing based on the same.

OTHER FIELD EXPIRIENCE
- Fully supervised the Installation of Catalyst tube & Hair Pin tube Supporting Grids of Naphtha Reformer, As part of Hydrogen Unit in IOCL Baroda.
- Preparation of QAP, Job procedures and Inspection test plans as per specification and Bid requirements and documentation accordingly.
- Familiar with WPS & PQR
- Involved in the Pre commissioning activities of Solvent De-waxing Unit of IOCL Digboi Refinery & Hydrogen unit of IOCL Baroda Refinery v Familiar with Codes like ASME SEC IX, ASME SEC II, ANSI B 31.3, API 650 and EIL Specifications regarding Piping, Welding, Material, Surface preparation & Painting, Hot & Cold Insulation, Jacketed Piping, Steam tracing, Storage Tank Fabrication, etc

FINAL DOCUMENTATION
Marking of site changes in drawings, documents and sending the markup to Engineering for as built document, Marking up includes layout drawing.

OTHER SKILLS
Possess sound knowledge of computer. Working knowledge of Excel, AutoCAD-2000 and other related day-today office Software Programs. Worked with Windows 98, Office 2000.

EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering

Professional Qualification
Training in AutoCAD 2000 from Unique CAD Centre
Safety Training for Lifting workshop level 3

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8151 to 8200 of 10801)

Go to Search Parameters...

Brief Description

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

Job Application for Drilling Engineer (onshore/offshore)

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

Welder

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Good experience in the field of computer works by using operating, installation and

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Respected sir/madam . I¡¦m a Diploma in Petro chemical technology and I¡¦m looking forward to work in a stimulating and challenging environment that will convert my skills into performance and recognition for my hard work , honesty and sincerity

Young MBA & CPA with Big 4 audit experience & multinational internship exposure, a multidisciplinary background & diverse profile, and a great fluency in English, Chinese and Malay.

I recently completed the degree of MA in Management from Webster University London, been engaged in jobs, where I had opportunity to interact with people from diverse groups. Passionate to develop my career in business management.

B.eng. + MBA with 2.5 years exp. in construct. + 4 in mgt and finan. consult with inter. firms in Europe and Canada. French, English, funct. Spanish. Look. for internat. and challeng. position (off / onshore)in project or contract mgt or in a corporate position. Open to other interesting positions.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

I'm seeking a long term employment with a company that can offer advancement and a challenging career

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

I am a well-qualified and experienced accountant as I worked on most of computer accounting program as well as manual. And I am in lookout of suitable placement in Egypt as per my job handling (in brief) shown

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

Planner / Scheduler: 2 Years Experience, Site Engineering: 1 Year Experience Developing Schedules, Resource Allocations, Planning Spreadsheets, Deployment Schedules, Charts, Progress Reports. Review of Contractor’s Programmes, Specifications, Contracts. Tracking Correspondences, Archives

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

12.02-03.03 Pertra 06.02-11.02 SkyBrush 06.01–05.02 RWE-DEA 02.01–05.01 Norsk Hydro 12.99–09.00 Privat work 02.00–08.00 DONG 02.97–11.99 Saga Petroleum 03.95–01.97 Schlumberger norway 02.89–02.95 Schlumberger worldwide

Business Process Reengineering of a Manufacturing Company Using tools such as Supply Chain Management, Lean manufacturing & Computer Simulation Modelling

Currently employed through Nabors Drilling as Motorhand. Previous experience as Derrick hand, rough neck, and lease hand. H2S ticket through Pitts, Nisku Alberta. Presently studying for my first line ticket.

Safety Coordinator, obtained experience on the Middle east and Balkan in construction safety. In possession of OSHA 500 certificate (certified trainer for OSHA 10 & 30), HAZWOPER 40hrs, CPR/First Aid certified. etc

Advanced Computer Skills, Beginner Mechanical Skills

I am looking for an entry level post (roustabout, rigger or other) to start my career in the Offshore Industry.

M.Eng.(Civil) from Concordia University, Montreal, Canada and over 2 years experience as a graduate civil engineer in building construction projects

Project Management and Mining Engineering Professional with 19 years experience

Free! Mining Controller, Accountant, CPA, Finanacial & Business Analyst

I have 35 years experience in the security field.

M.S. In HRM, BBA in Management with three years of contract management experience in Africa and Gulf.

B Sc. Mechanical enginering , 13 years experience in Caterpillar heavy equipments and powerstations, service parts and product support departments.

Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related

Microstation CADD Civil Engineer Utilities Specialist and GIS

My highest skills are working with Microsoft office, I also have a vast knowledge of different databases. I enjoy working in a team environment or alone.

Engineering Analysis :CEASER - II (STATIC analysis),PDMS,Programming language ¡¡±C¡¨, AutoCAD, SolidWroks, Ansys, Primavera, Elite, Ms-Office, Excel, Word, Windows Xp, 95.

Experienced in the pipeline surveying field from begining of preliminary survey to end of construction.

Aplly for rigger foreman

I've been working as HSES Advisor more than 7 years in different oil& gas projects such as LNG OP-s,Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.

Instrument technician

Versatile, knowledgeable, exploration geologist

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 [ 164 ] 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out