Resume - I have successfully completed innumerable complex and difficult Tasks/projects a...

Misco Jobs

Resume #26976

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I am a very hard working Executive and an excellent decision maker and have successfully completed innumerable Tasks/projects which are either abandoned or not taken-up due to their complex nature and high-risk factor by adopting methods not tried earlier with immense benefit to the company, I am at present working for. I can shoulder still higher responsibility to bring any company to heights untouched earlier which is otherwise impossible to achieve by conventional means.

SUMMARY
- Empannelled by United Nations as one of the expert (view www.google.co.in search MM Hazarika)
- Strong knowledge of all oil field related jobs.
- Exposure to project management and strong administrative jobs.
- Looking for an opportunity to design a new generation of bits but commited to my son to develop.
- An expert on oil field drilling and work over operation.
- Over 30 yrs of experience on various jobs relating to completing jobs which otherwise impossible to achieve by conventional methods

EXPERIENCE
1971–1973 M/s United Engineers Sibsagar
Design Engineer
- My main job to design pre-fabricated steel structures, M/s Staging etc.
- Including general maintenance and repairing of all types of Machinery.

1973–1975 Oil India Limited(Ex-BOC) Dibrugarh
Trainee Drilling Engineer
- Within 3 months of my training I was selected to take independent charge of both Drilling & Workover wells out of the whole batch of trainee.
- Confirmed in the post of Drilling / Workover engineer in the year 1975.

1975-1978: Oil India Limited (Ex-BOC) Dibrugarh
Drilling Engineer
Mainly exposed to exploratory Drilling wells and critical work-over wells.
Achievement: Highly successful in seeing various problems from angles not seen earlier.

1978–1982 Oil India Limited(EX-BOC) Dibrugarh
Senior Engineer (Drilling)
- Permoted to the post of Sr. Engineer(Drilling) w.e.f. 18-05-1978.
- Mainly exposed to exploration drilling & critical Work-over wells.
- Transferred to the position of Sr. Engineer(Drilling)- equipment for about six months.
- Transferred to the position of 'Techinical Control / Operation Officer', a rank in management group w.e.f. 24/10/1980 and hold the position for 2 years.
Achievement: Brought down overtime of the entire organization to half. Pumping of crude oil to various refineries resumed following long shut down due to Assam agitation to save the Company from a imminent collapse. The identity was restored.
Suptdg. Engineer (Drilling)
- Promoted to the post of suptdg. Engineer (Drilling) w.e.f. 30/08/1982.
I have been credited with the following during my tenure as Suptdg. Engineer (Drilling).
- Saved at least 15 rig days at each well drilled under my supervision.
- Did the fastest ever achieved (6 days) rig move of BHEL-E-1400 rig with limited man power.
- Completed drilling to a depth of 3300m just only in 17½ days with BHEL-E-1400 rig which is a record.
- Introduced many modifications to BHEL-E-1400 AC/ACR rigs for elimination break downs.
- Successfully completed a complex casing patch job using a new technique.
- Associated myself in drilling the deepest well of OIL.
- Successfully completed number of abandoned wells.
- Tackled number of Blow-outs successfully under my direction.
- Unlimited number of Fishing jobs successfully completed under my direction.
- Worked in offshore rig (deep water) "PETREL" in western Andaman as a 'Drilling Supervisor" for a short period when the well was in a critical stage and was about to be abandoned in 1985-86. The well was later drilled to its targeted depth successfully.
- When the company unable to exploit the newly discovered find at Bagapani even with the help of district authorities and two rigs remained idle, self overcome the situation in favour of the company by winning the locals of their rightful demands.
- Lunched use of Journal bearing bits in India.
- Introduced underbalanced drilling in OIL.
Dy. Chief Engineer (Drilling)
Promoted to the post of Dy. Chief Engineer (Drilling), Rajasthan Project on 23/12/89.
- Over-all head of Planning Section.
- To draw-out tender documents (NIT) for all types of Onshore rigs and its associated services and evaluation of offers.
- Preparation of various contract documents connected with OIL well drilling.
- Keeping contracts with DGH, CC Clearance committees, World Bank officials for Planning purposes of the Project.
- Simultaneously holding the post of Manager (Mines).
- Over-all in-charge of all Drilling and Workover operations being carried out by M/s. OIL INDIA LIMITED, in Thar Desert.
Achievement: 1) Established the field at 'Rajasthan Project' which was unable to explore even by renowned international companies due to complexity of the field. Challenge over-come with better ideas never thought of earlier single handedly.
M/s Enron earning profit on their Kharsang field, Assam which was loss making one against the background that the option was rejected by their counterpart with full back-up from geological & production set-up at U.S.A. but overpowered during discussions held at their Delhi office on offering alternate methods of production by me, an idea given on individual capacity.
2) Experimented use of PDC bits for use in our Assam field which were failures in all attempts made by individual companies to sale their products and successfully transffered the technique to Assam saving valuable rig time and cost.

Chief Manager(Project)
Promoted to the post of Chief Manager(Project) w.e.f 01/01/98.
- Over-all Administration and its timely execution of the Project (GVP) which is being carried out most meticulously.
- Completed the project with utmost austerity. Saved approx. Rs.10 crores from the estimated cost of Rs.55.00 crores for the Project(ONGCL incurred @ 200 Cr.).
- Successfully completed a complicated fishing operation with a modified tool in the deepest well drilled at Ganga-valley(Loc.GKBA).
- Entire drilling operation is handled single handedly.
Achievement: 1) All actions towards Administrative and Technical aspects carried out in a way never experimented earlier most successfully saving hundred of cores of rupees to the organization with a set-up which was 1/5th of the general manpower requirement for executing such a huge project.
2) When unable to proceed with the project work to drill a lone well(Location GKBA), the project faced imminent shut down due to Naxalite activities, self overcome all odds under gunpoint.

EDUCATION

TRAINING
- Passed Higher Secondary School Leaving Certificate Examination from Sibsagar Government Higher Secondary & Multipurpose School in the year 1966.
- Obtained B.E. (Mechanical) Degree from Jorhat Engineering College under Dibrugarh University with 64% marks in aggregate in the year 1971.

- Took a course in "Advance Drilling Technology" by
P. Moore, USA.
- Took another course on "Drilling Technology" in
DPTC, Aberdeen, UK for 2 months.
- Took a course on Human Resource Development in
Administrative Staff College, Hyderabad,India.

PAPER WRITTEN/PUBLISHED
Authored three technical papers on the following subjects.
- A new technique of casing patch-up (SPE 17017).
- Effect on penetration rate by blanking-off a nozzle in a tricone bit (SPE 17016).
- How a better rate of penetration can be achieved by blanking-off a nozzle in a tricone bit (SPE 17102).
- A number of papers written recently yet to be published.

MEMBERSHIP APPRECIATION
- SPE, WWF (India), Member (Life) Administrative Staff College, Bella Vista.
- Selected for the SPE Membership Development award for 1990.
- Selected as one of the experts in Drilling Technology by Citizen Ambassador Programme, a foundation headed by President of USA as its Chairman to represent a World Body.
- A member of Technical group (S.P.E.) and Internationally addressing problems being faced by the Drilling Industry, which cover all subjects connected with Administration and highly Technical aspects over networking.

- During my over thirty years of service in OIL INDIA LIMITED from 1973 till date, I have gathered sufficient experience in both technical/ field as well as administrative jobs. Throughout my stay in OIL. I have discharged my duties to the satisfaction of all and received appreciation including Cash Awards for my contribution to the Company.

PERSONS FOR REFERENCE
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 9905)

Go to Search Parameters...

Brief Description

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Experienced In Construction & Commissioning Of Oil & Gas/ Petrochemical/ Refinery/ Fertilizer And Power Projects Both In Offshore & Onshore.

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

A highly adaptable and meticulous Rotating Equipment Engineer with hands on experience on Centrifugal and reciprocating compressors, Steam turbines, Gas turbine, Pumps, Agitators, Fans and Blowers, Mechanical seals, Gas seals and Vibration analysis.

7 years in refining admin. and 8 years of oil well service

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

Extensive experience in the operations of oil & gas, refinery and hydrocarbon process

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

Experienced, commercially and technically aware Project / Construction Manager - Director. EPC project experienced for works up to 500 mil USD. Specialised in projects involving FPSO, offshore terminals (shallow and deep water), pipelines, platform fabrication, hook up and installation.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Canadian citizen, Bilingual, with long experience in project scheduling, cost control. Strong knowledge of the scheduling techniques and related computerized programs such as Primavera Project Manager (P3, P3e and P3e/C), Ms Project and MS Office.

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

A highly effective Senior Manager, who meets challenges directly, creates positive change and motivates teams to exceed goals. Proven record of success setting strategic direction, creating and executing solid asset management plans, improving operations and increasing profitability.

Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India

I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development

I have twenty five years with Mobil/Duke energy in field and plant. I have three years with Northern Natural Gas as an operator

Sr. Piping Designer - CadWorx/AutoPlant

About 11 Years Experiece working in the Oil and Gas Sector as Document Controller/Turnover Document Controller/Turnover Engineer. I have worked for some of the reputed multinational Constrcution Companies like Chiyoda, Foster Wheeler and Toyo.

QHSE Manager having 13 years on IMS Implementation and certifications , have been worked in a multinationals companies like Weatherford and DSD

Over 25 years experience supervising the drillin of deep high pressure wells, both vertical & horizontial

Reliable and safety conscious, 41 Yrs old with 21 years plant operating experience in Oil and Gas Production, Gas Plant And petro-chemical industries within international environment

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

Occupational Health Specialist / Emergency Medical Doctor / Physician

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

city and guilds ,years ,1,2,3 . advance craft , higher national

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Analyzer and Instrument Technician, with significant experience through training and certification

I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections

SAP Program/Project Manager with multimillion dollar projects in Asia Pacific & Europe

Senior Real Estate Paralegal

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am an aspiring and dynamic Process Plant Operations Personnel with supervisory skills and overall experience of about eighteen years in petrochemical industries, possessing a Diploma in Chemical Technology. Background includes supervision/ operation of continuous and batch process plants.

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out