Resume - Well rounded in Experience: Well Engineering, Production Engineering, Project Ma...

Misco Jobs

Resume #27015

CONTACT INFORMATION:
View contact information...

CAREER ACCOMPLISHMENTS
Shell Malaysia Exploration & Production, Miri, Malaysia Jul. 05 – Present
Position: Deepwater Well Engineer Operations v Lead technical limit aspiration efforts in Deepwater offshore Sabah operations v Monitor and Supervise Daily Drilling operations for Malikai Project operation

Shell International Exploration & Production, Rijswijk, The Netherlands Sep. 03 – Jul. 05
Position: DtL Well Engineer (Drilling the Limit Performance Consultant)
- Focal Point to deliver step change performance in the EPA region.
- Developed TL calculator and TL time setting target tool v Constructed, developed, and implemented DtL Well Delivery Staffing Best
Practice Model throughout all Shell Regions.
- Co-lead readiness review audit for Ormen Lange big bore wells in Norway v Conduct and Participate in Peer Assisted Value Challenge/ Concept Design
Challenge/ DWOP
- Lead Kaizen learnings introduction and TL Execution into Russia Low
Cost Wells Study v Coordinated 2005 EPA Technology Week Conference

Shell International Exploration & Production, Rijswijk, The Netherlands Feb. 02 – Sep. 03
Position: Production Technologist (Smart Wells Implementation team)

- Co-authored a technical paper titled "Controlling Water Production Using
Intelligent Completion Technology in Multi-Laterals Saih Rawl Field, Sultanate of Oman" presented 2003 High-Tech Wells Conference in Galveston, Texas.
- Provided technical expertise on PDO "Smart Well" project involving the installation of four Well Dynamics interval control valves to control high water cuts in a 4 leg multilateral well resulting in a 28% decrease in water production and a 1385 bbl/day increase in oil production.
- Technical advisor and Shell witness point for Brunei Shell Petroleum in the successful installation of the Bugan-07 smart completion involving three
Weatherford ROSS valves, four Expro PT gauges, and Sensa DTS in a 4 zone well.
- Mentor for new engineers coming into the smart well deployment field. This includes well site and office guidance into the duties expected of a Production Technologist.
- Presented PDO, 10 well ICV trial installation practices, costs, results and way forward to Shell and PDO management in turn securing approval for 10 well/
40 ICV project. Total project to increase field production by 1000m3/day.
- Flow control valve and subsea deployment focal point for smart wells team.

Chevron Co. USA, Midland, Texas. Apr. 01 – Feb.02
Position: Production Engineer / Technologist (Area Production Engineer)

- Production Engineer for New Mexico EMSU and EMSUB (+/-400 wells) fields.
Designed and implemented workover and completion designs for the EMSU and EMSUB waterfloods.
- Prepared operating budget for EMSU and EMSUB and designed field plan in accordance with operating budget guidelines. Increased production 9% while staying under budget 11% during role as area PE.
- Develop and edit numerous secondary recovery programs to increase production using water injection, acid stimulation, and selective cement placement.
- Represented Chevron Permian Basin Business Unit at career day to introduce students to a career in the oil business.

Chevron Co. USA, Lafayette, Louisiana. Jan. 98 – Apr. 01
Position: Well / Completions Engineer (Drilling Representative)

- Supervise daily drilling and completion operations of a Mobile Offshore
Drilling Unit on several locations in both state and international waters.
- Amend drilling and completion programs to account for real time field situations.
- Supervise drilling operations of land drilling unit in south Texas

ENSCO International Offshore Co., Broussard, Louisiana. USA. May. 97 – Jan. 98
Position: Well Operations Trainee (Operations Engineer)

- Participated in the ENSCO Engineer Trainee Program.
- Worked several positions on a Jack up rig including roustabout and floor hand. Assisted in the completion of the nightly drilling report. Outlined engineer trainee candidates assignments and responsibilities.

SIRGO Brothers Energy Corporation, Farmington, New Mexico, USA May 94-96 – Sep. 94-96
Position: Engineer Trainee (Summer program)

- Lead roustabout supervising a crew of four. Maintained water supply for drilling rig including installation of water supply line, constructed reserve pits, plan surface layout including spotting equipment. Assembled wellhead.
- Liaison between New Mexico BLM and company to assure activities would not violate government laws or procedures.

CAREER RESPONSILITIES
Position: DtL Performance Improvement Consultant Sep. 03 – Jul. 05

Primary duty is to act as Drilling the Limit performance improvement consultant in Shell's EPA region while implementing the Well Delivery
Resourcing Best Practice Model. Technology implementation and best practice benchmarking liaison between Global Shell regions. The duties as a DtL performance improvement consultant included:
* Drive well delivery performance improvement
* Implement Well Delivery Process
* Transfer learnings between regions
* Developed DTL action plan for 2004-2005 along the guidelines of the
DTL business plan before end Feb 2004
* Co-ordinate running of key peer assisted events for EPA
* Capture best practices and share with other regions.
* Communicate best practices from other regions to own region and promote/verify application
* Lead EPA Health checks with involvement of WELLS activity leader or discipline leader
* Organize train the consultant events for EPA
* Promote setting and use of TL as a way to drive performance in the region
* Liaise with GIT's to have latest technology plans & vision available to DTL consultants
* Develop generic procedure for a feedback loop from Technical Limit setting to Technology Development teams in the OU's
* Identify opportunities to AAR technology trials
* Help Wells Global Network (WGN) implement the Global Field Trials
Register

Position: Production Technologist Feb. 02 – Sep. 03

Primary duty is to act as a flow control valve and subsea focal point, providing support to Shell OUs. The secondary duties involve providing production technology support to build smart well business cases. The duties as a production technologist included:
* history matching field production data.
* identifying smart well candidates within the different operating units.
* perform inflow/outflow analysis using WePS to identify gains using smart well technology.
* purpose conceptual completion designs.
* perform economic analysis.
* evaluate project capability of selected vendors
* apply and evaluate new technologies such as FCV's, DTS, flow arrays.
* work closely with PT's from different fields to implement new technology trials.
* mentor for less experienced engineers within the deployment team
* provide smart wells field implementation support to OUs.
* prepare and review technical reports

Position: Production Engineer/Technologist Apr. 01 – Feb. 02

Primary duty was to act as area production engineer. Oversee completion, workover and production operations for two New Mexico water-flood fields. The duties as a production engineer included:
* budget and capital planning
* completion design
* develop workover programs and proposals
* basic reserves calculations
* ensure operations are in regulatory compliance

Position: Well/Completions Engineer Jan. 98 – Apr. 01

Member of Chevron offshore drilling representative group. Supervise and coordinate everyday drilling activities associated with offshore drilling in the Gulf of Mexico. Carry out daily drilling activity plan in accordance with designed drilling program. Duties included.
* evaluate quotations associated with drilling and completion operations.
* evaluated and implement operational best practices.
* organize and coordinate rig moves
* coordinate equipment arrival and departure with shore base
* amend and construct workover, drilling and completion programs
* ensure company operations were conducted in a safe manner and within MMS and NPDES guidelines.

Position: Well Operations Engineer May. 97 – Jan. 98

Participant in ENSCO offshore Engineer Trainee Program. Earned valuable offshore equipment knowledge by being able to work from a roustabout up.
Duties included:
* complete nightly well drilling report.
* observe operation responsibilities from tool pusher and driller
* Rig floor hand for 6 months
* Rig roustabout for 3 months

EDUCATION
Sept. 91 – May 97 Texas Tech University, Lubbock, Texas, USA. B.Sc. in Petroleum
Engineering

PROFESSIONAL AFFILIATIONS/ HONORS
Oct. 97 - present AADE (American Association of Drilling Engineers)
SPE (Society of Petroleum Engineers)
Nov 04 Earned special recognition award for development of BP Staffing Model

COMPUTER SKILLS
* Proficient in MS Word, PowerPoint and Excel.
* Proficient in Shell's proprietary well performance simulator (WePS).
* Shell Well Cat Well Modeling simulator program

TRAINING
- Industry technical and safety courses:
* Shell Production Technology P264, Noordwijkerhout, NL
* IWCF Well Control Certification Aberdeen Drilling School (Good until April 06)
* Shell Well Engineering Round II Certification, Noordwijkerhout, NL (ongoing)
* Shell Well Engineering Distance Learning Package, Noordwijkerhout, NL
* Shell Advanced Casing Design, Aberdeen, Scotland
* Shell Round II Prep Course, NAM, NL
* Shell Production Technology 144, Noordwijkerhout, NL
* Shell Well Control (Surface and Sub-surface), Robert, Louisiana.
* Shell Fire School RISC - Rijswijk, The Netherlands
* Brunei Shell Petroleum BOISET - Helicopter Underwater Escape, Offshore
Survival & fire-fighting training, Brunei Darussalam
* Shell / OGCI - Reservoir Engineering for Other Disciplines, Houston, Texas.
* Chevron/BP DTC - Drilling Practices, Houston, Texas.
* Chevron/BP DTC - Drilling Leadership Management, Houston, Texas.
* Chevron/BP DTC - Solids Control Planning, Houston, Texas.
* Chevron/BP DTC - Advanced Drilling Fluids, Houston, Texas.
* Chevron/BP DTC - Primary and Secondary Cementing, Houston, Texas.
* Chevron/BP DTC - Drilling Transition/Depleted Zones, Houston, Texas.
* Chevron/BP DTC - Casing Design, Houston, Texas.
* Chevron/BP DTC - Drill String Design, Houston, Texas.
* Chevron - NPDES training program, Lafayette, Louisiana.
* Chevron - Rod Pump Optimization, Midland, Texas.
* Chevron - Artificial Lift Seminar, Odessa, Texas.
* Chevron/Schlumberger - Peep Analysis and Decision Tree, Midland, Texas.
* Marine Water Survival - University Southern Louisiana, Lafayette, Louisiana.
* Randy Smith Well Control - Lafayette, Louisiana.
* Marine Firefighting School - Delgado Community College, New Orleans, Louisiana.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4251 to 4300 of 9785)

Go to Search Parameters...

Brief Description

Filipino Certified Public Accountant looking for Malaysian Job

Licensed Electrical Supervisor / Project Manager with 30 years experience

Oil and Gas Professional with expertise in Operations and Finance developed over a seventeen year period in foreign countries

Highly competent, experienced HSE professional seeks overseas project

Instrument & Control Engineer

Instrumentation Engineer with good knowledge of INtools & SmartPlant Tools

Junior Drilling Engineer, Completion, optimizing mud...

Planning Engineer with Primavera skills & german language skills

looking for Directional Driller or MWD Operator Job

Electronics and telecomm engineer working as plc programmer

Process operator/technician. Had experience and knowledge in process operation, both in petrochemical and oleochemical industries

Port Captain

I am HSE supervisour with Eni in Milano

Diploma of Associate Engineer (D.A.E) in Instrumentation Technology

Team Player, Work with local and international contractors, International working conditions, QHSE supervision, Oil & Gas Logistics, Sales / Marketing / Port activities, Containers Terminal / Operations Management Assistance, Freight forwarding / Construction / Purchase / Stock Management

I have 4 plus years of oilfield experience as Senior Mud in onshore Rigs,I have been working in EMEC (Egyptian Mud Engineering & Chemicals Company) in KSA Branch with SAUDI ARAMCO, I am having B.Sc. degree in Chemical Engineering and also have carried out 2 years of Petroleum industry Diploma.

Mechanical QS / Contracts Engineer With nearly two years experience in various kinds of oil, refinery & gas project in Overseas.

calibration, Mentinence, Installation, And wired the all kinds of control panels.Undestand all kinds of drawing.

Having hands-on experience with softwares like Primavera project Planner and Maximo. I am well-versed with all stages of planning and resource allocation, Bar Chart , S-Curve and Deployment Schedules.

Excel, Word, PowerPoint, Fortran, Matlab, AutoCad,Computer program and spreadsheet development,Design of new and existing equipment, PFD’s PID’s and associated documentation,Heat and material balances

Project Manager-Oil & Gas: 8+yrs. experience in Fortune 500 Oil & Gas Company

5 yrs of exp in research and instrumental analysis

I have been working in the oil field since 1999. I have worked on onshore fields in the south of Algeria for SONATRACH company and her drilling and cementing department as drilling supervisor.

Petroleum Engineer with 13 years of experience with International Oil/Gas Company

I did my B.E. Metallurgical Engineering with first class first div having 05 year vast an experience in Quality assurance of 3rd party inspection and Investment Casting Plant of Pakistan International Airlines which produced Parts of GEAE, Boeing and Airbus Aircraft etc.

MBA ( Specialisation Oil & gas Sector ).

Masters in Petroleum Engineering, Bachelors in Chemical Engineering, Worked for Two Years on Low Salinity Enhanced Oil Recovery Technique for Alaskan Reservoirs

MS in petroleum engineering with background in chemical engineering .

Mechanical engineer specializing in oil and gas pipelines and related facilities. Additional experience with Pulp and Paper and design of Cogen power plants.

Excellent geosteering experience for horizontalizontal, deviatedated vertical wells. Excellent userof PASON, Mudware, TVD, Ozi Explorer and Ryon Directional - Wintrak systems. Have passion of learning and swiftly using new computer applications and technology. I am willing to travel.

5 Years Roughneck, 8 years Mudlogger, and 3 Years Geological Consultant

Reservoir Engineer with 6 years working in the Oil and Gas industry including

Seeking a position with strong emphasis in Industrial Automation & Control System with direct exposure to System Design, Configuration and Implementation where above six years of experience will increase efficiency. Additional skills in Project Engineering and Imparting Training

Total 8 Year of Experience In basic modeling and clash checking and extraction of drawing in PDMS And Detail Engineering in The Field of Oil And Gas Production (Offshore & Onshore Project) Refinery, Power Plant, Chemical Plant Hydrometrical, Cement Plant Fertilizers Plants & Material Handling Equipm

Motivated,Experienced,

Onshore, Construction, Civil,Commissioning, EPC and EPCM Project Delivery, Engineering Consultancy, Gas Plant, HSE compliance, Inspection, JSA (Job Safety Analysis), Maintenance, Mechanical - General, Offshore Oil & Gas, Onshore & Offshore Pipelines, Onshore Gas Plants, Onshore Oil and Gas, Piping

Bachelor of Engineering (Mechanical)

A Mechanical Engineer with Vast experienced in ISO 9000,ISO 14000,QS 9000 and OHSAS 18000 Systems and experienced in Third party inspection and certification services.

HSE Management

Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

Field Engineer with knowledge in petroleum and geology

Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.

Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.

Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience

I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)

BGAS/CSWIP Painting Inspector Grade 2

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 [ 86 ] 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out