Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #27463 next resume »» CONTACT INFORMATION: View contact information... OBJECTIVE To work diligently with others and contribute a positive energy to the workplace while working to achieve the mission of your company. EDUCATION Instrumentation Technician Northern Alberta Institute of Technology, NAIT Instrument technicians install, maintain and repair the measuring and control instruments used in industrial and commercial processing. Instrument technicians work with a wide variety of pneumatic, electronic and microcomputer instruments used to measure and control variables such as pressure, flow, temperature, level, motion, force, and chemical composition. Mechanical Engineering Technologist SIAST Kelsey Campus, Saskatoon SK The program concentrates on HVAC systems, piping system design as well as several other aspects of mechanical system design and analysis. Skills are developed in nondestructive and destructive testing, welding metallurgy and processes, metallography, corrosion testing and control techniques, metals analysis, heat treating and processing. Students develop knowledge and skills relating to computer use with spreadsheets, word processing, computer assisted drafting and specialized software. Students become familiar with a wide range of materials including ceramics, composites, plastics, soils, concrete and asphalts. Emergency Medical Technician Certificate SIAST Kelsey Campus, Saskatoon SK EXPERIENCE Maintenance Department Worker 2000-present Alliance Pipeline, Regina SK Maintenance of Gas Turbine Compressor stations. Task included: maintenance of DCS, PLC, SCADA systems, Cimplicity HMI's, Turbine Control Interface (TCI) Mark V, as well as all associated hardware including gas turbine, power turbine and compressor, valves, analysers, vibration equipment and thermography. Maintenance Department Worker Summer 1999 SaskEnergy, Saskatoon SK Maintained regulator and compressor stations, observed and recorded millivolt readings on underground piping (corrosion control), and replaced old rectifiers. Equipment Operator 1996–1998 ALMAR Limbing, Leoville SK Operated heavy equipment in the forest industry and was responsible for repairs and personal production. SPECIAL SKILLS Strong Computer Skills, Allen Bradley PLC, Control Wave, Logic Master 90- 70/90-30 Turbine Control Interface MarkV, Strong Mechanical Aptitude, AutoCad Drafting INTERESTS Hockey, golf, slow pitch, hunting & fishing, View contact information... «« previous resume next resume »» Search Results (Resumes 9201 to 9250 of 9785) Go to Search Parameters... Brief Description Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization. QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and Driver My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry. Civil engineer, project management, site management, cost estimation, Russian, English, Turkmen speaker, CIS experience, Siberia, Russia, Turkmenistan, Kazakhistan Mining & construction Equipment, Oil field production, Power generation I studied Geological Engineering, Mineral Resources Engineering and Computer operations. Excellent Oral and Written Communication Skills Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas. I have experiance in sulphoric and sulphonation factories Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor, IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity) Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance. I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008. API 653 experience in corrosion engineering, Inspection,engineering consultancy and RBI techniques. Specific experience in Hi end inspection skills, storage tanks and pipeline inspection. Acoustic emission and Guided wave trained.Overseas experienced Surveyor and navigator (I love trouble shooting) Talented and accomplished Finance professional with background in Accounting, Business Finance, and Auditing. Proven ability to oversee all corporate financial operations. With previous experience as accountant. A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. I'm a 33 year old African (Tanzanian) male, a holder of Bachelor of science (chemistry/Botany) degree. I've over the years accumulatedgreat analytical and technical skills, excellent communication and interpersonal skills, a team player and a very fast learner able to cope and fit in fast. 29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV) Construction Safety Manager Official Tendering Works regarding tender requirements, Preparing documents, Co-ordination with GSECL,Supervise the Sites of 66/132/220/400 KV Substation & Transmission Lines, O & M Works Instrumentation Technician and Mechanical Engineering Technician. Strengths in DCS, PLC's vibration monitoring equipment and thermography 27 years of mechanical and process engineering Electrical / mechanical service tech Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure. Porficient in use of Trimble SPS instruments and rovers. I have done road surveying, underground utilities, The current project I am working on is under budget and ahead of schedule Responsible of Logistic, Warehouse, Purchase for Inter. Infrastructure Works Contractors I'm hardworking,trustworthy, quiet but can communicate well, can handle stressfull situations and most of all a very good team player. Bilingual Electronic Engineer with some experience in pattern recognition and ultrasonic sensors, seeking an entry level position. Background in networks and telecommunication systems theory. Experience in Analog and digital circuit simulation, Visual Basic and C language programming. Man of many trades Pipeline / HDD Engineer with 7 years global experience A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player Camp, facilities, catering Management I am a graduate of Eastern Michigan University and enthusiastic to work in my field. I am a hard worker, efficient, accurate, knowledgeable and I am eager to continue my education both through job experience and additional classroom learning knowledge of subcontracting, making the subcontracts in english and russian, verbal and written translation, document control. I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer. 6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory. Geologist I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR. I am able to work independently as well as work in a team. I have high qualifications and achievement throughout my studies period. I believe I can make a difference with my skills and qualifications in your company. Over six years experience as a professional geologist with training in petroleum geology, mining geology and geochemistry Mechanical Supervisor / Project Manager With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality Free! Instrument Technician with Overseas Russian Experience Rig Doctor,Safety Officer And Administrator 911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician. Project, Contract Management in Construction and IT. Mechanical design, construction monitoring, tender documentation and reporting, marketing and sales of services. Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 Production trains to 4 marine offloading systems Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   [ 185 ]   186   187   188   189   190   191   192   193   194   195   196   Last Seach Parameters Change search parameters... INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com