Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #27911 next resume »»
CONTACT INFORMATION:
View contact information...

SYSTEMS HANDLED
* DCS: Fisher-Rosemount DeltaV System with Batch Recipe Management Software
* PLC: Allen-Bradley Controllogic, PLC 5/25, 5/30 ; SLC 500 to SLC 5/04 series, Micrologix.
* SCADA: Rsview32, Intellution, Wonderware, Panel View, DTAME.
* ESD: Moore Quadlog System, HIMA Planar 4, HIMA ELOP II.
* Device BUS: FieldBus, Profibus-DP.

OTHER SOFTWARE PACKAGES WORKED WITH
* Intellution Fix32/iFIX SCADA software.
* Rsview32 SCADA software.
* Wonderware Intouch SCADA software.
* RSLogix-5, RSLogix-500, A.I.Series for PLC, APS,
* Sytech Report Manager, a third party reporting software.
* Fisher-Rosemount's Segment Design Tool software.
* 4-mation configuration software.
* Matrikon OPC Datamanger and Emerson OPC Mirror.

SOFTWARE KNOWLEDGE
* Languages: C.
* Spreadsheets: MS Excel.
* Operating Systems: Windows XP/NT/95/98.
* Visual Basic for developing Operator Interface.

CORPORATE TRAINING
* Undergone HIMA Planar4 and ELOP-II Engineering Training at HIMA Paul Hildebrandt GmbH, Germany.
* Completed a course on Personal Survival Techniques at School of Synergic Studies, Mumbai – India.
* Completed a course on Helicopter Underwater Escape Training (HUET) at School of Synergic Studies, Mumbai – India.

PROFESSIONAL EXPERIENCE
A].Employed with W-Inductries Limited LP. Houston, USA as a
Systems Engineer.
From: October 2005 till date.
Job Responsibilities:
System Design/Programming/Configuring/Commissioning of Allen-Bradley Controllogix PLC and Wonderware SCADA system for Subsea Application.

B].Employed with Equipment And Controls Nigeria Ltd (ECNL), Nigeria as a
Control System Engineer.
From: June 2003 till September 2005.
ECNL is an authorized representative of Emerson Process Management
for Nigeria, Angola and Equatorial Guinea.
Job Responsibilities:
System Design/Programming/Configuring/Commissioning of DeltaV & HIMA system.

Projects Handled in ECNL

* Conducted hardware and software FAT, installation and Pre-commissioning for SHELL Petroleum Company's Forcados project using the DelatV as well as HIMA's Planar 4 system. Matrikon Data Manger is used to transfer data from HIMA to DeltaV.

* Was involved in commissioning of the Water Injection Project for ExxonMobil's Zafiro FPSO in Equatorial Guinea using the DeltaV system.

* Was involved in commissioning of Awoba Gas Collection Plant for SHELL at Cawthrone channel, Nigeria. The system involved DeltaV DCS system with Filedbus devices installed and also connection to HIMA ELOP-II system through Emerson OPC Mirror software.

* Commissioned the DeltaV system for ExxonMobil's GO Platform in East Area in Nigeria. The system had Fieldbus devices and was connected through OPC to ICS Triplex ESD system.

C]. Provided service to Syntech Ltd. DUBAI as a Systems Engineer from March
2003 to June 2003.
Projects Handled in Syntech:
* Project: GALATTA Gas Field Development project.
Client: PETRECO (Bulgaria)
The software for APACS+ Quadlog System using Wonderware InTouch as front end was developed. The system was designed, software developed and was made ready for FAT.

D]. Worked with Emerson Process Management (I) Pvt. Ltd., Mumbai (INDIA) as
Sr.Engineer-Systems in System and Solution division.
From: June 2000 to March 2003.

Emerson Process Management (I) Pvt. Ltd., an ISO 9001 company is a part of Emerson, USA., an Fortune-100 company. Emerson Process Management is renowned globally for its varied products in Instrumentation and Process Control Systems.
Worked with DeltaV DCS system and on Intellution's Fix32 and iFix package for developing the MMI.

Job Responsibilities for Projects Handled
* Conducting and coordinating system engineering meeting with client.
* Interacting with different vendors for buyouts.
* Preparing engineering documents like Bill of Material, IO Assignment, Loop Schematics, Panel design and layout etc, abiding ISO norms.
* Understanding client requirements for the Process.
* Configuration of process software using DeltaV application software. Developing user interface with Fix32 or iFix environment.
* Designing of Control Panels, Consoles, Control Room layout and the software strategies.
* Conducting FAT for the whole system before dispatch.
* Installing and Commissioning of DCS system at site.
* Conducting Site Acceptance Test.
* Generating reports using Sytech Report Manager.
* Imparting User Training to the client.
* Assisting sub-ordinates in developing the software.

Projects Handled in Fisher-Rosemount

* Project: Utility and Hydrogenator Plant.
Client: Orchid Chemical & Pharmaceuticals Ltd. (Aurangabad).
The DCS system handled more than 400 I/O's for the two sections of the plant. The process involved complex cascade loop. The system was designed, commissioned and handed over. Imparted Engineering training to 2 Engineers and Operator training to 4 Operators.

* Project: REVAMP OF CARPET PLANT.
Client: Niranjan Decoflocks (Pvt) Ltd (Ambala).
The process involves Emulsion preparation. The system was implemented using Advance
Control ( viz Cascade, Ratio loop and Multivariable Process control and Feedforward control ) and Batch Control with Recipe Management in accordance with ISA S-88
standard, with all the Field devices including DI/DO and drives connected over
Foundation Fieldbus and Profibus-DP network.

* Project: PVC Monomer Plant.
Client: Shriram Vinyl and Chemicals Industries Ltd. (Kota).
The DCS system handled more than 600 I/O's. The system also utilizes the DeltaV Application Station facility with DeltaV Web Server loaded on it. With this any third party station can view the Graphics, History and other related data of the process. The system also has fieldbus devices connected and commissioned to it. The system was designed, commissioned and handed over. Imparted Operator training to 16 Operators.

* Project: Coagulation / Dryer Revamp.
Client: Bayer ABS Ltd. (Baroda)
The DCS system handled more than 550 I/O's.. The process also involved development of logic from the wiring drawing of the existing relay based system. The system was designed, commissioned and handed over. Imparted Engineering training to 4 Engineers and Operator training to 20 Operators.

* Project: ABS REACTION.
Client: Bayer ABS Ltd. (Baroda)
The DCS system handled more than 600 I/O's.. The process also involved development of logic for Batch Totaliser using Phase Logic Module tool. The system was designed, commissioned and handed over.

* Project: PB REACTION AND STORAGE AREA.
Client: Bayer ABS Ltd. (Baroda)
The DCS system handles around 500 I/O's. The process involves some complex loop and also the logic for Batch Totaliser. The system also involved communication with GE Fanuc PLC system. The system was designed, commissioned and handed over.

The three projects of Bayer ABS were implemented in three stages but on common network. Hence the total I/O count of the system summed up to 1644.
* Project: DM Water Plant
Client: Bharat Petroleum Corporation Ltd. (Mumbai).
The process involves DM Water preparation. The system is being implemented using roundabout 144 fieldbus devices with remote communication of the field based digital
I/Os taken on STAHL remote I/Os. The software was developed and the system was made ready for FAT.

E] Worked as a Project Engineer with United Engineers.
From: September 1998 to May 2000.

United Engineers is an authorized integrator of Allen-Bradley Products. It also undertakes field erection and commissioning jobs.

Job Responsibilities for Projects Handled
* Conducting and coordinating system engineering meeting with client.
* Preparing engineering documents like Bill of Material, IO Assignment, Loop Schematics, Panel design and layout etc..
* Understanding client requirements for the Process.
* Designing of Control Panels, Consoles, Control Room layout and the software strategies.
* Development of Ladder Logic for PLC system.
* Development of SCADA Application.
* Conducting FAT for the whole system before dispatch.
* Installing and Commissioning of PLC/SCADA system at site.
* Imparting User Training to the client.
* Interacting with different vendors for buyouts.

Projects Handled in United Engineers

1. Company Name: NALCO, Angul (Orissa).
Nature of Work: Inspection of PLC control panel and Development & Commissioning of SCADA application for oil fired Melting & Holding Furnace.

2. Company Name: Uttam Steel Ltd., Khopoli.
Nature of Work: Inspection & Commissioning of PLC control panel and
Development of SCADA application for Acid Regeneration Plant.

3. Company Name: Hikal Chemical Industries Ltd., Taloja.
Nature of Work: Designing & Wiring of PLC Control Panel, Development of ladder logic, Inspection & Commissioning of entire system for Brine
Chilling Plant.

4. Company Name: Dharamsi Morarji Chemicals Co. Ltd., Ambernath.
Nature of Work: Designing & Wiring of PLC Control Panel and PC console,
Development of ladder logic and SCADA s/w. Inspection &
Commissioning of entire system for Sulphuric Acid Plant. Imparted engineering training to 2 Engineers.

5. Company Name: Cadila Pharmaceuticals Ltd., Ahmedabad.
Nature of Work: Development of ladder logic and operator interface software for
Fluid Bed Dryer. Was also involved in commissioning process.

6. Company Name: Indian Oil Corporation Ltd., Taloja.
Nature of Work: Development of ladder logic and operator interface software for
Drum Decanting Process and commissioning of the entire system.

7. Company Name: Indochem (P) Ltd., Kanjurmarg.
Nature of Work: Development of software of Micrologix for 625KVA
KMF Diesel Generator Set.

8. Company Name: AIR-INDIA, Mumbai.
Nature of Work: Provided commissioning assistance and also technical support d during warranty period, for the Aircraft Maintenance Elevator
System supplied by Synchro Air Lift Corp., California (USA). The system consisted of AB PLC with remote I/Os and Reliance drives.

9. Company Name: ROLTA Ltd. Mumbai.
Nature of Work: Development of ladder logic of Micrologix for Diesel Generator Set.

10. Company Name: PHILIPS INDIA Ltd., Kalwa.
Nature of Work: Development & Commissioning of ladder logic of Micrologix for
Uncut Wire & Current Testing Unit.

ACADEMIC CREDENTIALS:
Academic Record Name of University / Board Year of Passing Percentage Marks Class Obtained
B.E. (Instrumentation)University of Mumbai 1998 61.43

DIPLOMA
(Instrumentation) Board of Technical Education 1995 65.09 First Class

S.S.C. Mumbai Board 1992 77.85 Distinction

References: Available if required.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4251 to 4300 of 9785)Go to Search Parameters...
Brief Description
Licensed Electrical Supervisor / Project Manager with 30 years experience
Oil and Gas Professional with expertise in Operations and Finance developed over a seventeen year period in foreign countries
Highly competent, experienced HSE professional seeks overseas project
Instrument & Control Engineer
Instrumentation Engineer with good knowledge of INtools & SmartPlant Tools
Junior Drilling Engineer, Completion, optimizing mud...
Planning Engineer with Primavera skills & german language skills
looking for Directional Driller or MWD Operator Job
Electronics and telecomm engineer working as plc programmer
Process operator/technician. Had experience and knowledge in process operation, both in petrochemical and oleochemical industries
Port Captain
I am HSE supervisour with Eni in Milano
Diploma of Associate Engineer (D.A.E) in Instrumentation Technology
Team Player, Work with local and international contractors, International working conditions, QHSE supervision, Oil & Gas Logistics, Sales / Marketing / Port activities, Containers Terminal / Operations Management Assistance, Freight forwarding / Construction / Purchase / Stock Management
I have 4 plus years of oilfield experience as Senior Mud in onshore Rigs,I have been working in EMEC (Egyptian Mud Engineering & Chemicals Company) in KSA Branch with SAUDI ARAMCO, I am having B.Sc. degree in Chemical Engineering and also have carried out 2 years of Petroleum industry Diploma.
Mechanical QS / Contracts Engineer With nearly two years experience in various kinds of oil, refinery & gas project in Overseas.
calibration, Mentinence, Installation, And wired the all kinds of control panels.Undestand all kinds of drawing.
Having hands-on experience with softwares like Primavera project Planner and Maximo. I am well-versed with all stages of planning and resource allocation, Bar Chart , S-Curve and Deployment Schedules.
Excel, Word, PowerPoint, Fortran, Matlab, AutoCad,Computer program and spreadsheet development,Design of new and existing equipment, PFD’s PID’s and associated documentation,Heat and material balances
Project Manager-Oil & Gas: 8+yrs. experience in Fortune 500 Oil & Gas Company
5 yrs of exp in research and instrumental analysis
I have been working in the oil field since 1999. I have worked on onshore fields in the south of Algeria for SONATRACH company and her drilling and cementing department as drilling supervisor.
Petroleum Engineer with 13 years of experience with International Oil/Gas Company
I did my B.E. Metallurgical Engineering with first class first div having 05 year vast an experience in Quality assurance of 3rd party inspection and Investment Casting Plant of Pakistan International Airlines which produced Parts of GEAE, Boeing and Airbus Aircraft etc.
MBA ( Specialisation Oil & gas Sector ).
Masters in Petroleum Engineering, Bachelors in Chemical Engineering, Worked for Two Years on Low Salinity Enhanced Oil Recovery Technique for Alaskan Reservoirs
MS in petroleum engineering with background in chemical engineering .
Mechanical engineer specializing in oil and gas pipelines and related facilities. Additional experience with Pulp and Paper and design of Cogen power plants.
Excellent geosteering experience for horizontalizontal, deviatedated vertical wells. Excellent userof PASON, Mudware, TVD, Ozi Explorer and Ryon Directional - Wintrak systems. Have passion of learning and swiftly using new computer applications and technology. I am willing to travel.
5 Years Roughneck, 8 years Mudlogger, and 3 Years Geological Consultant
Reservoir Engineer with 6 years working in the Oil and Gas industry including
Seeking a position with strong emphasis in Industrial Automation & Control System with direct exposure to System Design, Configuration and Implementation where above six years of experience will increase efficiency. Additional skills in Project Engineering and Imparting Training
Total 8 Year of Experience In basic modeling and clash checking and extraction of drawing in PDMS And Detail Engineering in The Field of Oil And Gas Production (Offshore & Onshore Project) Refinery, Power Plant, Chemical Plant Hydrometrical, Cement Plant Fertilizers Plants & Material Handling Equipm
Motivated,Experienced,
Onshore, Construction, Civil,Commissioning, EPC and EPCM Project Delivery, Engineering Consultancy, Gas Plant, HSE compliance, Inspection, JSA (Job Safety Analysis), Maintenance, Mechanical - General, Offshore Oil & Gas, Onshore & Offshore Pipelines, Onshore Gas Plants, Onshore Oil and Gas, Piping
Bachelor of Engineering (Mechanical)
A Mechanical Engineer with Vast experienced in ISO 9000,ISO 14000,QS 9000 and OHSAS 18000 Systems and experienced in Third party inspection and certification services.
HSE Management
Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser
Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer
Field Engineer with knowledge in petroleum and geology
Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.
Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.
Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience
I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)
BGAS/CSWIP Painting Inspector Grade 2
Chemical plant operator, 17 years experience, 4 years as plant controller.
I have extensively worked with world renowned engineering firm
Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit
I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   [ 86 ]   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com