Resume - Instrumentation, Control system, quality and compliance Engineer, fluent in Engl...

Misco Jobs

Resume #28163

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Instrumentation, Control system and quality engineer

PROFESSIONAL EXPERIENCE PA, USA
11/ 2000 - 2003: Automation & Validation Solution
Automation and Validation Engineer
Developed User requirement Standards.
Developed, revised, and executed validation protocols for Installation, Operationnal,and Performance Qualification.
Generated factory Acceptance Test(FATs) and standard operating procedures, Task Summury and Exception reprots, user and functional requirements for plant packaging, manufacturing and utility systems for the following:
Johnson's &Johnson's "McNeil" Consumer Products Pharmaceutical Plant:
Control system for Pharmaceutical liquids Packaging lines.
Solid dose pharmaceutical processing packaging lines, Induction bottle sealers.
Faulding/Purepac Pahrmaceutical:
Generated IQ and OQ protocols for Faulding/Purepac pharmaceutical Local Area Network(VPN)
Executed approved protocols. Performed all work as defined in the protocol, completed required documentation as applicable (i.e., Amendments, TIRs and/or comments during protocol execution by adhering to cGMPs.
Verified that the TIRs generated during execution are resolved.
verified that completed test cases for accuracy and completion.
Compiled, organized, and summarized all data during protocol execution for the final test summary report.

04/2000- 11/2000: Worldwide Electronics Corp. NY, USA
Technical and Service Manager
Installation of parts of Access Control System in Staten Island University Hospital
Maintenance of Control system on field, and database management
Maintenance and upgrade of Paging and messaging system in the Hospital (SIUH)

1996-1998 SONATRACH / GENERALELECTRIC Algeria
Control System Engineer, G.E Turbine Control Command Retrofit project
Established a work plan and Schedule for each phase of the project using concurrent Engineering to suit funding and time limitation conditions for 82 Turbines MS3002J Retrofit project.
Developed a new control system specifications to enhance performance and reliability of the machines (Turbines).
Feasibility studies, System analysis, System development and implementation with the chosen contractor.

1994-1996 SONATRACH / BECHTEL
Control System & Automation Engineer, Maghreb-Europe pipe line project Algeria
Implementation of SIEMENS SCADA system from field transmitters to Man-Machine (MMI) interface in the control room.
Implementation of NT Software for data acquisition, diagnostics, and equipment management.
Testing, Commissioning and startup of the entire plant.

1993-1994 SONATRACH / NUEVO PIGNONE INC, Algeria
Instrumentation Engineer, Natural Gas Vehicle project testing and installation of electronic kits in the converted vehicle (prototype)
Monitored power Console programming to test vehicle to be converted.

1992-1993 Polytechnic Institute of Oran, Algeria
Electronics Instructor, Department of Electrical and Electronic science
Courses taught:
Basic Electronics,
Electronic Measurements and Signal Processing Theory

SPECIAL SKILLS
Fluent in English, French and Arabic
G.E Certified for Maintenance and exploitation of MS 3002J GE Turbines, SPEEDTRONIC Mark I,II,III,VI and MarkV
Experience in ALLEN BRADLEY PLCs
Experience in BENTLEY NEVADA MACHINES VIBRATION System
Proficients with word processing, spreadsheet, and graphics.
Technical writing and presentation experience.
Internet searching, uploading and downloading with Netscape and Internet Explorer, proficient with word processing, spreadsheet, graphics, AutoCAD.
ISO 9001 standards and accreditation.
cGMP and validation experience.
IEEE member

EDUCATION
1985-1991 University of Science and Technology of Oran Algeria
Bachelor of Science of Electronic Engineering (BSEE)

REFERNCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 10926)

Go to Search Parameters...

Brief Description

Mechanical Engenineer three (03) years of experience on maintenance, construction-inspection and detail engineering;recently I have been working as a Junior Process Engineer for over a year participating on conceptual engineering for a oil industry in a field that produces heavy oil.

5 years experience in Mechanical Piping Drafting in well site and compressor design; field experience with as-built well design; completion of intelligent P&ID design using 3D software

Oil and Gas Professional

8 years of design, drafting, and field experience allows me to exploit my knowledge of electrical and instrumentation systems.

SAP tachnical consultant

Experienced procurement professional skilled in managing material and equipment, controlling inventory and overseeing quality issues. Proven ability to manage staff and communicate with other departments, vendors, and executive management to ensure procurement goals are met.

I have master degree in architectural engennering, good experiences in construction and architecture designe, I have realized industeriel and reidentiel projects and I have good computer background

Process Engineer (Operations) having more then 7 years hands on experience of refinery operations including Safe startup and shutdown, emergency shutdown, turnarounds, safety standards, hazardous studies, HAZOP, commissioning and startup. Ability in develop and implement operational and safety proce

6 Years professional Experience in PLC, SCADA & HMI Programming

I am a self starter with eyes for innovation and adventure

To work with existing staff and facilities contributing the best of my ability and quota, so as to improve organizational objectives and achieve managerial goals and targets.

Electrical/systems ENGINEER

Creating and developing ideas, analytical skills, self motivated, good team player, ability to work with little or no supervision, good communication skills.

Negotiate Oil and Gas Leases, Determine mineral ownership, leasehold ownership, curative, train, supervise, draft documents, etc.

my education background as well as the full time job assignments during last three years through which I have had exposure and hands on experience in operations and maintenance in power plant engineering techniques make me an ideal candidate for the position.

i have finished my bachelor of mechanical engineering and have a 3yrs experience in piping field with oil&gas sector.currenlty im working as a piping supervisor in kuwiat oil compnay project.preparation of material requestion,execute the isometric drawings,check the bill of materials,prepare a f.c.n

Explorationist

Seeking a challenging career for utilizing a diversified experience span over a period of 2 years as Petroleum Engineer within a dynamic and progressive organization

Experienced Sevice rig Manager

I have very good experience of working on rotary and static equipments.i have worked on planned preventive/predictive maintainence as wllas handelled emergency shutdowns.i am capable of working independtly & can provide leadership to group of workmen.I am aware of the importance of SAFETY .

At present, Working as a Senior Safety Officer with Al Khayarin Group, Site at Ras Laffan Industrial Area Doha-Qatar. from 08/ June /2006 to till date. I did NEBOSH (International General Certificate in Occupational Health and Safety) from SHIELD's (UK).

I have a successful track record in dealing with govermental agencies as well as private landowners. I have worked in all aspects of land work.

Condition monitoring engineer in cement industry for 3 years.

Graduate with Document Control Experience

Please accept my resume as an introduction to the skills and abilities I can offer you. My entire career has been dedicated to supporting internal and external customers. My core goal is to create a positive impact with the organizations I have been affiliated with.

Mircosoft excel, word, powerpoint & cot (chain of title) program

After working on Service Rigs here in Alberta for over six years, I would like to further my experience by working overseas. With my background of rig work, farming, and college, I can push a rig or drill on it.

I have eleven years of experience in Construction, Oil & Gas industries and in other fields too. Good knowledge in Logistical support, Materials Management, Supply Base Operations, Onshore Coordination and in other logistics aspects too.

Strategy development & implementation; Project management; Team leadership; Standardisation & cost reductions; ITIL; Quality Management - ISO 9001; Customer Relationship Management; Programming methodologies; Engineering applications; Excellent communication/negotiation

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

Extensive experience in managing E, H & S programs in South America, Mexico & the United States that resulted in contributing to eliminating serious worker injuries that resulted in effectly established a safe environment. Worked effectively with OSHA CFR 1910 & 1926, EH & S Compliance, NFPA Codes.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Experienced Logistics/Procurement Manager

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

Over 18 years experience in oil and gas industry working in offshore/ onshore fields and base offices at various levels in well services mainly in completions including subsea completions and also in wireline, well testing, well stimulations & workover operations.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out