Resume - Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, ...

Misco Jobs

Resume #28259

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMARY
Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Polymers, Fertilisers and Ammonia Storage & Handling Facilities.
- 5 years of Piping/Mech. design experience in Operating Refinery of Kuwait National Petroleum Company and handling gross root & revamp projects independently.
- 9 years of Piping design experience in Oil & Gas field in a cosultancy, Toyo Engineering India Ltd (TEIL), including twenty six months deputation to Toyo Engineering Corp. Japan (TEC). Worked in a capacity of Group Leader & handled EPC projects independently.
- 2 years of Piping design & construction experience in a 500 MW Power Plant of Tata Electric Company
- Imparted training & lectures to educate & develop trainee engineers.
- Involved in the development of Piping Design Calculation Software with the help of System Dept.
- Involved in Standardisation activities & Improvement of existing Standards/Procedures of Company.

EDUCATIONAL QUALIFICATIONS
Bsc. Engineering (Mechanical), First Class from Zakir Hussain College of Engineering, Aligarh Muslim University, India in July 1989

Brief description of responsibilities
1) Detail design engineering (Design of new system and modification of existing system)
2) Stress analysis of piping system, design of supports, spring hangers, expansion joints, etc., using CAESAR-II & TRIFLEX software
3) Preparation of Piping Material Specification
4) Preparation of plot plan, piping plan, isometrics, support sketches
5) Piping design using PDS-3D modeling software
6) Preparation of requisition, purchase spec., Technical Evaluation and Vendor Drawing approval
7) Assistance to construction &, commissionig activities and trouble shooting of design related problems during construction stage.
8) Coordination with other design groups, operations & maintenance departments in all matters related to project work
9) Project management services to gross root & revamp projects
10) Feasibility & technical study and recommendation of proposed modification
11) Conceptual design of new system and proposed modification for cost estimation
12) Participation in HAZOP study for various projects and modifications
13) Preparation of tender document (ITB) referring to Licensor's & KNPC requirements for EPC (Engineering, Procurement & Construction) contractor.
14) Design of multi foam pourer system, water spray system, roof drain, skimmer, rim seal heat detection & alarm system for fixed roof & floating roof strorage tanks.
15) Modification of existing and design of new vessels & heat exchangers.
16) Coordination with rotating equipment department to arrange the information regarding pumps & compressors for the project requirement.
17) Training & lectures to educate & develop trainee engineers
18) Development of Piping Design Calculation Software with the help of System Dept.
19) Standardisation activities & Improvement of existing Standards/Procedures of Company
20) Associate Member of The Institute of Engineers, India. (Membership No. AM/085300/6)

ACHIEVEMENTS
Seminar Attended a) Attended two days seminar in India organised by KLG Consultant, an Affiliate of COADE Engineering, Houston, Texas, on Pipe Stress Analysis using CAESAR II software.
b) Attended five days seminar in Kuwait organised by Pipingsolutions, Houston, on Pipe Stress Analysis using TRIFLEX software.
Certificate Course a) Attended three days intensive course on Pipeline Corrosion, organised under Career Development Programme of NACE International India Section from Apr. 02 to 04 97.
b) Attended five days intensive course in Kuwait organised by Pipingsolutions, Houston, on Pipe Stress Analysis using TRIFLEX software.
c) Attended five days intensive course in Kuwait organised by KIMS on Materials Management System using MAXIMO software.

Safety Course
Variour inhouse courses & trainings on Safety, Health & Envioronment Management system (SHEMS). Few of them are as follows.
a) Safety, Health & Envioronment fundamentals b) Ocupetional Health System c) Behaviour based saety awareness, etc.

Professional Association
Associate Member of The Institute of Engineers, India. (Membership No. AM/085300/6)

Stregnth a) Excellent troubleshooting & analytical skill b) Proven ability to prioritize & systematically execute the job independently to meet the schedule c) Well organized, commited and proficient with details d) Excellent interpersonal, management & team skill

Projects associated
Kuwait (August 2000 till date)
Various gross root & revamp projects in Shuaiba Refinery and Local Marketing of K.N.P.C.,

India (September 89 to August 2000)
IOCL's Butene-1 Plant, Chambal Fertilisers and Chemical LTD's Urea Plant, Indian Petrochemicals Co. LTD's Polybutadiene Rubber Plant, Bindal Agro Chemicals LTD's Ammonia Storage & Handling Facilities, Vinati Organics LTD's IBB plant, etc.

Japan (September 93 to October 95)
Petrochemical Industries Co.'s Polypropylene plant in Kuwait, Ssangyong Oil Refining Co. LTD's Buncker C Cracking Refinery in South Korea.

1. Present Experience with Kuwait National Petroleum Company (K.N.P.C.)

1.1 August 2000 till date
Company: M/s Kuwait National Petroleum Company (K.N.P.C.), Shuaiba Refinery, Kuwait
Position: Assigned as a Mechanical Design Engineer (Piping) in the Engineering & Maintenance Dept.
Job Description: 200,000 bpd Shuaiba Refinery of Kuwait National Petroleum Company (K.N.P.C)
Responsibilities: Project management services to gross root & revamp projects. Feasibility study, technical study and recommendation of proposed modifications. Conceptual design of new and proposed modification for cost estimation. Participation in HAZOP study for various projects and modifications. Preparation of tender document (ITB). Design of multi foam pourer system, water spray system, roof drain, skimmer, rim seal heat detection & alarm system for fixed roof & floating roof strorage tanks. Modification of existing and design of new vessels & heat exchangers. Coordination with rotating equipment department to arrange the information regarding pumps & compressors for the project requirement. Preparation of Piping Material Specification, equipment layout, piping general arrangement drawings, isometrics, support sketches. Stress Analysis. Preparation of requisition and purchase specification for vessel, storage tanks, piping components & special commodities. Technical Evaluation and Vendor Drawing approval for vessel, storage tanks and various piping commodities. Coordination with other design groups, operations & maintenance departments in all matters related to project work

2. Prior Experience with Toyo Engineering India Ltd. (May 91 to August 2000)

2.1 June 99 till August 2000
Licenser: IFP, France and Sulzer Chemtech, Switzerland
Client: Indian Oil Corporation Ltd., India
Position: Assigned as a group leader
Job Description: 11500 MTPA BUTENE-1 Plant (Gujarat Refinery), Gujarat, India
Responsibilities: Preparation of Piping Material Specification, equipment layout, piping general arrangement drawings, isometrics, support sketches. Stress Analysis of critical lines (tower piping, lines connected to rotating equipments such as pump, compressor and turbine), using CAESAR II. Preparation of requisition and purchase specification for piping components & special commodities. Technical Evaluation and Vendor Drawing approval for various piping commodities.

2.2 April 97 to June 99
Licenser: Toyo Engg. Cop. (TEC), Japan
Client: Chambal Fertiliser and Chemical Ltd., India
Position: Assign Engineer
Job Description: 2 X 1175 MTPD Urea Plant, Rajasthan, India
Responsibilities: Preparation of Piping Material Specification, equipment layout, piping general arrangement drawings, isometrics, support sketches. Stress Analysis of critical lines (tower piping, lines connected to rotating equipments such as pump, compressor and turbine), using CAESAR II. Preparation of requisition and purchase specification for piping components & special commodities. Technical Evaluation and Vendor Drawing approval for various piping commodities.
In addition to above, preparation of requisition and purchase specification for special piping commodities including special fittings (block type fittings with urea grade stainless steel 316L material, special valves with R-4 trim material, etc.).

2.3 Nov. 95 to Mar. 97
Licenser: Union Carbide Corp. (UCC), USA
Client: M/s Petrochemical Industries Company (KSC), Kuwait
Position: Deputed to Toyo Engineering Corp., Japan and worked in Material Team of Piping Design Department as Assistant Engineer
Job Description: 100,000 MT/Y Kuwait Polypropylene Plant (KPP)
Responsibilities: Preparation of Piping Material Specification, preparation of requisition and purchase specification for piping components & special commodities ( including bellow seal valves, metal seated ball valves etc.). Technical Evaluation and Vendor Drawing approval for various piping commodities.
2.4 Sep 93 to Oct 95
Licenser: Institut Francais du Petrole (I.F.P.),France
Client: M/s Ssangyong Oil Refining Co. Ltd., Onsan, Korea
Position: Deputed to Toyo Engineering Corp., Japan and worked in Material Team of Piping Design Department as Assistant Engineer
Job Description: Buncker C Cracking Project (Refinery Complex), Onsan, Korea
Responsibilities: Preparation of Piping Material Specification. Preparation of requisition and purchase specification for piping components & special commodities including special refractory lined double disc slide valves for flue gas (up to 64 inch), special metal seated butterfly valve (56 inch), Refractory lined bellows for temperature up to 816 „aC (up to 92 inch), guillotine blinds, special air operated check valves, special metal seated ball valves and special refractory lined spacer & blanks (up to 92 inch). Technical Evaluation and Vendor Drawing approval for above piping commodities.

2.5 Mar 92 to Aug 93
Licenser: (1) Toyo Engg. India Ltd. (TEIL), India & (2) Japan Synthetic Rubber (J.S.R.), Japan
Client: (1) M/s Bindal Agro Chemicals Ltd. (B.A.C.L), India & (2) M/s, Indian Petrochemicals Co. LTD. (I.P.C.L.). India
Position: Assistant Engineer
Job Description: (1) 5000 MT Ammonia Storage & Handling Facilities, U.P., India
(2) 30,000 TPA Polybutadiene Rubber Plant, Baroda, India

Activities: Preparation of Piping Material Specification, equipment layout, piping general arrangement drawings, isometrics, support sketches. Stress Analysis of critical lines (tower piping, lines connected to rotating equipments such as pump, compressor and turbine), using CAESAR II. Preparation of requisition and purchase specification for piping components & special commodities. Technical Evaluation and Vendor Drawing approval for various piping commodities.

2.6 May 91 to Feb 92
Licenser: Institut Francais du Petrole (I.F.P.), France
Client: M/s Vinati Organic Ltd., India
Position: Assistant Engineer
Job Description: 1200 TPA Isobutyl Benzene Plant, Maharashtra, India
Activities: Preparation of Piping Material Specification, equipment layout, piping general arrangement drawings, isometrics, support sketches. Stress Analysis of critical lines (tower piping, lines connected to rotating equipments such as pump, compressor and turbine), using CAESAR II. Preparation of requisition and purchase specification for piping components & special commodities. Technical Evaluation and Vendor Drawing approval for various piping commodities.

3. Prior Experience with Tata Electric Company

Sep 89 to May 91
Company: M/s Tata Electric Company, India
Position: Project Specialist
Responsibilities: Assigned for the supervision of the following construction & commissoining activities.
Job Description: Turbine-Generator Integral Piping, Piping for Condenser Tube self cleaning and maintenance of Auxiliary Equipment for 500 MW Thermal Power Plant Unit #6, TROMBAY

4. Computer Knowledge

4.1 Operating systems
Conversant with MS DOS, WINDOWS Software

4.2 Software
Conversant with CAESAR-II & TRIFLEX pipe stress analysis software, PDS-3Dmodeling software, Microsoft Office (Word, Excell, Access., Mail, etc), Lotus Notes, Out look, Autocad, etc.

5. Current Remuneration: US $ 3500 (Tax Free)

6. Expected Remuneration: As per company norms and procedure / Negotiable

7. References
Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4551 to 4600 of 9785)

Go to Search Parameters...

Brief Description

Welder

Electrical Mainteance & Repairs HND Elecct/Elect, City&Guilds Level 4 London (HNC/B.TECH.)

Mud engineer, drilling fluid engineer,computer skill, etc...

My career objective has always been to contribute my education and engineering skills within a growing and dynamic organization.

Geosteering, Exploration, Development, Wellsite

Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

I am Electronics Automation Engg. I am design Hardware&Software of Project

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

Equipment operator/open-cased hole operator/driver-commentary task assessment trainer.

Electronics and Instrumentation Engineer

Static equipment design engineer with 4 yrs. experience in design also handled coldbox, surface condenser package items willing to work overseas

3 yrs diploma in mechanical engineering and have 7 yrs experience in operation and maintenance of DG sets & auxilliaries like compressors,WHRB,pumps etc

AB PLC , Siemence PLC Safety PLC

B.sc Geology, Msc Environmental Control and Management,. Self motivated ,dedicated, innovative creative team player with a high sense of responsibility. excellent communication and computer skills

Chemical Engg with 4 yrs experience in Design, R&D. HAve exposure to INPLANT, PIPENET, ASPEN, HTRI

Advanced SCADA Application Specialist, design, commissioning and training

Knowledgeable in PDS, Microstation, SPR, AutoCAD and Caesar II.. Good Communication Skills.. Consistent President of the Class.. From JGC Corp

Being HSE officer for the site (Ahmedabad) involved in the preparation and execution of Emergency Management System for the sites. (Documentation, Displays, Training, Information to External Agencies, )Carrying out Safety Audits, Monitoring of implementation of punch points and reporting etc.

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

Construction Administration/Project Controls

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

Planning and scheduling, Project and Maintenance

Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries

seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation

I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution

5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT

Process Engineer

Deepstrip rectification, in-depth examination, non-destructive testing, fault diagnosis and post installation testing of gas turbine engines

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

CSWIP – 3.1 welding inspector certified from TWI,All stage wise QC related activities for the fabrication and installation of pipeline, piping and structural for offshore platforms and other related works

Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand

More than 13 years of working experience with Major Oil & Gas Industries for their Documentation with responsibilities in Technical Documentation, Library system, Supervision, Administrative, Vendor, Procurement & Project Management etc.

Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Fertilisers Plants. 5 years experience in Operating Refinery of KNPC. 9 years of cosultancy (EPC) experience. 2 years of Piping design & construction experience.

Seven years of experience in oil and gas upstream industry as geophysicist. Currently involved in exploration & development of a deep-water lease in East Coast of India with multiple play/prospect (gas) discovery identified by 15 successful exploratory wells.

Over ten years of experience in the field of Electronics and Computer Engineering

Instrument design engineer in BHEL (Bharat Heavy Electricals Ltd), Hyderabad, India in Control & Instrumentation (C&I) department in Steam Turbine, Compressor & Gas turbine Engineering division. DNV certified HSE lead auditor

Since 1995, I have worked as a Planning Engineer / Maintenance Planner in Oil & Gas Industrial, both on offshore and onshore terminal, worked for ARCO, BP and CNOOC companies. Response for Opertioans and Maintenance work activities, good at CMMS-MAXIMO, MS Project, P3 Project Planner.

Completions/Production Engineering Experience

working in Malaysia ( far east) from 3 and 1/2 yrs. Looking for jobs in oil & gas fields . In field operators or panel operators position with better salary as a long term contract basis preferable in far east or middle east.

I am a degree holder in Mechanical Engineering, having more than 13 years of experience in various types of Refinery and Petrochemical project.

Cost Engineer with exposure to Planning. Russian-mother tongue. English - fluent. Arabic - working knowledge

13 Years Strong Experience & Exposure in The Arena Of I&C Systems Successfully handled numerous large scale projects Worked with SCADA, PLCs and DCS Strong at commissioning, testing, documentation and handling of O&M Effectively led teams to deliver positive and timely results

13 yrs Professional Exp.which include Project Management, Engineering and Estimation. Responsible for the Implementation of QMS(ISO9001-2000). Countries of Work Exp: India,Singapore,UAE Languages Known:English,Hindi,Kannada,Tamil & Telugu.

I try to get better conditions and get better live with my skills and competency

My Nine years and Six months of experience , I have exposure in Power & Utilities. I have hands on experience for Gas Turbines, Steam Turbines, D. M. Water Plant, Plant & Instrument Air Package comprises of Dryer and Compressors, Raw Water Treatment Plant, Cooling Tower, and OSBLs.

Sap Basis consultant with 1.2 years of experience

Stability Analysis, Motion Analysis and Mooring Analysis of Ships and Offshore Structures

+1 YEAR EXPERIENCE IN PIPING DESIGN CURRENTLY IN DUBAI

To obtain a full-time Landman position, that will utilize my education in the oil and gas industry.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 [ 92 ] 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out