Resume - ¨ Over seven years of experience in the Design & Detailed Engineering of Piping ...

Misco Jobs

Resume #2850

CONTACT INFORMATION:
View contact information...

Summary

¨ Bachelor's degree in mechanical engineering.
¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants.
¨ Working knowledge of computer software packages; conversant with international codes & standards.

Experience

¨ 09/99 – Present: Mechanical Engineer
National Contracting Co. Ltd. (NCC)
P.O. Box 90, Al-Khobar 31952
Kingdom of Saudi Arabia

* Company is involved in design, engineering, procurement and construction of power plants. Currently executing three projects involving GE–Frame 7,GE – Frame 5, GE – Frame 6 GTGS. ISO 9001 accredited.
* Responsibilities include:
* Basic Engineering activities such as Preparation of Schematics, PFD's, P & ID's, Identification of Piping Systems
* Detailed Engineering activities such as Preparation of Overall Plant Layouts, Equipment Layouts, Pipe sizing & pressure drop calculations, Piping Layouts, Piping Isometrics
* Preparation of equipment purchase specifications including Gas Turbines, Fuel Tanks, Fuel Treatment Plants, Fuel Oil Systems, Piping Systems, Cranes, Water Treatment Plants, HVAC Systems, Fire Protection Systems, Other standard balance of plant equipment such as pumps, compressors etc.
* Review of Vendor Drawings & Design Calculations
* Proposal Engineering (Mechanical) for various Turnkey Power project proposals submitted by NCC
* Lead Mechanical Engineer for Hail / Najran power station expansion project of Saudi Electricity Company (Southern Region) involving 2 x Frame 7 gas turbine generator.
* Lead Mechanical Engineer for Tayma / Al-Wadjh power station expansion project of Saudi Electricity Company (Western Region) involving 2 x Frame 5 gas turbine generator.
* Lead Mechanical Engineer for Khafji Joint Operations power station expansion project of Arabian Oil Company / Aramco Gulf Operations involving 2 x Frame 6 gas turbine generator in association with Black & Veatch USA.

¨ 03/97 – 08/99: Assistant Engineer (Mechanical)
M.N.Dastur & Co.Ltd
Chennai, India

* Company is involved in Design & Detailed engineering of Metallurgical & Power plants.
* Responsibilities include: Preparation of Pipe Sizing & Pressure drop calculations, Bill of quantities & Technical specification for Piping systems, Tender scrutiny, evaluation, discussion with vendors and technical recommendation, Preparation of Construction drawings for Piping Systems (General Arrangement drawings, Piping supports, Isometrics etc).
* Projects involved: Detailed Design of Boiler & Turbogenerator interconnecting pipework for 30MW Captive Power Plant Project of S.N.Projects Ltd, Bellary, India, Detailed Piping Design of Blast Furnace Complex piping from the basic engineering supplied by M/s Shougang, China for 0.5 million ton Integrated Steel Plant Project of Bellary Steels & Alloys Ltd, India, Detailed Piping Design from the basic engineering supplied by M/s Carpco, USA for Column Floatation Project of Kudremukh Iron Ore Co. Ltd, India.

¨ 01/95-02/97: Mechanical Engineer
Mecon (I) Ltd
Bangalore, India

* Company is involved in Design & Detailed engineering of Metallurgical plants.
* Involved in Detailed engineering of Smelter Complex piping from the basic engineering supplied by M/s Outokumpu of Finland for Indo-Gulf Fertilizers & Chemicals Corporation Ltd, India

Other Expertise

¨ Working Knowledge of personal computers and software packages. Conversant with Piping Design Softwares.
¨ Conversant with international codes such as ASTM, API, ANSI, NFPA, etc

Education

¨ Bachelor of Engineering in mechanical engineering.
K.V.G.College of Engineering, Mangalore University (India), 1994.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5551 to 5600 of 9785)

Go to Search Parameters...

Brief Description

filing, answering telephone, replying e-mails, making an input and output letters, weekly and monthly report, booking a hotel and travel reservation, preparing for expatriate’s visa and passport also the flight schedule, and checking for crew change.

B.Tech from IITK, 4 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I have been working at Total E&P Indonesie as a Well Service Supervisor since 1998 until March 2006 (supervise slickline, well testing and maintenance, electricline (perforation and logging), snubbing unit and coil tubing unit) and as a Contract Workover Barge supervisor (with workover RIG) at CNOOC

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

8 years of international experience mainly in the oil field. Field Service Manager/General Field Engineer/IT Project Manager for Schlumberger worldwide/SCADA Business Developer Manager/Project Manager and SCADA Protocol developer for South America.

I have been working international as a contract wellsite supervisor, My area of expertise is in completions, abandonment and workover. I have worked on wells to 3500m in depth, sour from 1%-3% for about 1/2 my career.

KEYWORDS Mechanical, Electromechanical, Power , Control , sheet metal, Acoustics , ISO 9001, CAE , CAD, CAM, Manufacturing, Production, Maintenance .

Experience with successfully managing all aspects of a large drilling center including implementing manual and automated drilling systems; selecting, managing and training staff.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Seeking position that would help develop myself in the management field in the Petroleum Industry

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Hands on experience in the dynamics of the offshore oil drilling industry. Proven, reliable and committed to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

To establish wider horizons in the automation of business with the inherited knowledge in the respective field.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

An International Quality Assurance & Safety Manager with a proven track record for ISO 9001 implementation, maintenance and development within the Oilfield Engineering and Manufacturing Industries.An experienced Lead Auditor of Management Systems, Engineering Projects and Suppliers

PDS, Microstation, AutoCAD 2D/3D Piping Designer

B.Tech(Chemical Engineerin),Highly proficiency in english and management and Technical skills

Naval Architecture

B.E.& DIPLOMA IN MECHANICAL,EXPERIENCE IN CADCAM DESIGN,SHOP FLOOR MANAGEMENT,MAN MACHINE MANAGEMENT,ERP ENDUSER,INTERNAL AUDITOR ISO 9000,ISO 14000,ISO 18000,VENDOR DEVELOPEMENT

BE - ELECTRONICS & TELECOMMUNICATION , Fresher From MUMBAI UNIVERSITY

Prepare material requirement list for job pack, Check and monitor the shipping schedule for material delivery on site, Received, inspect stores and inventories all material received for stacking in accordance with established material system procedures, directive and methods, Insure incoming materia

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

Instrument, Electronic and Process Technician with exceptional people skills and ability to adapt & learn.

Analyzer Technician

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Dear Sir/Madam,

SEEKING A POST IN ESTEEMED COMPANY

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

CAN DO ALL TYPES OF MAINTAINENCE OF INSTRUMENTS,THEIR CALIBRATION,ZEROING,ERROR DETECTION ETC.

B.Eng in Metallurgical Engineering

Having 6months experience as instrument technician completing BE

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

My main features respecting my work are hard working, honest and keen to progress

Chemist/Lab technician

• Diploma with a total of 7 years experience in Construction & Maintenance of Plant Instrumentation systems from planning and scheduling to execution of the job.

I have 7 years experienc in oil &gas &power plant industry,my experienc is about piping engineer,i am experienced to work with pds software .i worked with 3 forign country(LINDE/TECHNIP/DOOSAN).

HSE Safety

Offshore Platform Superintendent, OIM certified. Manage combined operations. Core skill - Electrical and Instrumentation.

10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator

I'm a young and fresh graduate of geology from a reputable University in Nigeria Who loves to work in a challenging work environment where standards are high.

 Vessels, Pumps, Heat Exchangers and other Refinery Plant and BioDiesel Plant components representation in 3 Dimensional drawings using AutoCad 2004 before Plant Piping Design.

First Prev 101 102 103 104 105 106 107 108 109 110 111 [ 112 ] 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out