Resume - To utilize my broad skills and experience in offshore and onshore oil and gas in...

Misco Jobs

Resume #28515

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

ELECTRICIAN
July 2004 to present
MODEC Management Services Pte Ltd.
MV 9 Cuulong FPSO, Vung Tau, SR Vietnam
Client: CLJOC

* Responsible for the control and safety of all electrical equipment on the installation.
* Responsible for the isolations, issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of medium voltage (4160 V) and low voltage (450 V) electrical equipment, testing/fault finding on high and low voltage circuits.
* Operate Gas Turbine Generators (SOLAR) for power generations on the installation. Synchronization of power supplies. Performs maintenance, troubleshooting and repair.
* Do planned maintenance and unplanned maintenance on all electrical equipments on the FPSO installation and Well Head Platform. Responsible on AMOS M & P for electrical and instrument issues.
* Maintains a close check on electrical and instrumentation spares, consumables, tools and instruments and order as required.
* Perform maintenance, repair and troubleshooting on Fire and Gas System and Emergency Shutdown System.
* Assist in the commissioning of the electrical and instrument equipments while ship is still on dry dock in South Korea.
* Responsible for the maintenance and repair of Boiler Management System, Inert Gas System, Alarms and Controls on the installation.
* Responsible for the maintenance, repairs and troubleshooting of controls for Sea Water Injection Pumps, Fuel Gas Heaters and Compressors, Coolers, Motors, and Blowers.
* Workshop assessor for Competency Base Training Assessment.

ELECTRICAL SUPERVISOR (Unit Electrical Authority)
January 2002 to May 2004

Electrical Instrument Technician
August 1998 to January 2002
Rang Dong 1 FPSO, Vung Tau, SR Vietnam
Client: JVPC
SBM-TII/DML/HAMMONIA

Electrical Supervisor
FPSO II, Brazil
Client: Petrobras
May 1997 to June 1998
SBM-TII/DML/HAMMONIA

Electrical Instrument Technician
FPSO VI, Nigeria
Client: Ashland
February 1996 to March 1997
SBM-TII/DML/HAMMONIA

Instrument Supervisor
FPSO II, PHILIPPINES
Client: Alcorn
May 1992 to December 1995
SBM-TII/DML/HAMMONIA

* Responsible for the control and safety of all electrical equipment on the installation. Issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of all low voltage electrical equipment, testing/fault finding on low voltage circuits.
* Operate electrical equipment on low voltage generation system. Synchronization of power supplies.
* Do planned and unplanned maintenance on all electrical equipment on the installation. Responsible on AMOS M & P for electrical and instrument issues.
* Maintain a close check on all electrical and instrumentation spares, consumables, tools and instruments and inform Maintenance Superintendent of requirements.
* Performs maintenance, repair and troubleshooting of Boiler Management system, Inert Gas system, and Alarms and Controls on the installation.
* Responsible for the maintenance of all electrical and instrumentation equipments used in process and utility plant.

INSTRUMENT TECHNICIAN
Saudi Aramco (formerly Arabian American Oil Co.)
Uthmaniyah NGL Plant (Gas Refinery)
Dharan, saudi Arabia
October 1980 to September 1983 and July 1984 to August 1991

* Performs maintenance, repairs, installation and commissioning of all electronics, digital, pneumatics, and electro-mechanical instruments used in Gas Refinery operations.
* Performs maintenance, repairs, installation and commissioning, of all on-stream gas and liquid analyzers such as gas chromatographs, moisture, colour, oxygen, pH, conductivity, H2S and other hydrocarbon analyzers.
* Prepares new or modify installation of H2S and LEL monitors, recorders and indicators, and test run for acceptance.
* Ensure that spares and materials required for the continuation of the job, and order spares and materials as required.
* Acts as a team leader to a group of instrument technicians and repairmen, and provide technical guidance and work direction to Saudi Arabs Instrument trainees.

INSTRUMENTMAN
May 1977 to September 1980
Resins Incorporated (Chemical Plant)
Pasig City, Philippines

* Repairs, troubleshoots, and maintains all types of process control instrumentats use in Chemical Plant.
* Repairs, troubleshoots, and maintains all electronics, pneumatic and electro-pneumatics used in Power Generation Plant.
* Repairs, troubleshoot and maintains all instruments used in Utilities and Boilers, laboratory and control room.
* Perform installations, commissioning and construction works of all additional process instruments.
* Performs any other job-related task.
* Acts as team leader to assigned crew.

EDUCATION:
Diploma on ELECTRONICS ENGINEERING
Cleveland Institute of Electronics, Cleveland, Ohio, USA

Diploma on Trade Technical Education, Specialization: APPLIED ELECTRONICS
Marikina School of Arts and Trades, Marikina City, Philippines

B.S. in ELECTRONICS & COMMUNICATIONS ENGINEERING
UNDERGRADUATE, University of the East, Manila City, Philippines

SPECIAL TRAINING:
* Basic PLC Course
January 31 to February 17 2005, Meralco Foundation Incorporated, Philippines
* Hazardous Area Training
November 2002, JVPC, Vung Tau, Vietnam
* Hazardous Area Training
February 2003, SBM Marine Services (Thailand) Limited, Bangkok, Thailand
* Fundamentals of Process Control and Instrumentation
April 1978 to April 1979, Resins Incorporated, Philippines
* Bentley Nevada Vibration Monitoring Course
May 1983, Arabian American Oil company, Saudi Arabia
* Air Demand Analyzers
March 1988, Saudi Aramco, Saudi Arabia
* Micon Controllers
November 1990, Saudi Aramco, Saudi Arabia
* General Tanker Familiarization
January 1999, Consolidated Training Center, Philippines
* Shore Based Firefighting
January 1999, Consolidated Training Center, Philippines
* Basic Safety Training
January 2003, Consolidated Training Center, Philippines
* Helicopter Underwater Escape Training
April 2005, PetroVietnam Manpower Training College, Vung Tau, S.R. Vietnam
* HSC Upgrading Course (Microsoft Excel)
June 1999, Fame Maritime Foundation, Philippines

ADDITIONAL INFORMATION:
Holder of Registered Master Electrician License # 25020 issued in Manila City, Philippines on October 2001.

Holder of Certificate of Competency for ICSTCW for Seafarers issued in Manila City, Philippines on February 2002.

Holder of Philippine Passport # JJ 923831, issued in Manila City, Philippines with expiration date of 21 June, 2006.

Holder of Philippine Seaman Service Record Book # B003125, issue in Manila, Philippines with expiration date of March 2009.

Holder of Liberian Seaman Identification and Record Book # 107501, issued in Reston, Virginia with an expiration date of 14 May, 2007.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 9785)

Go to Search Parameters...

Brief Description

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

PhD candidate with experience in hardrock and softrock

plant operations/project management in power, petrochemical industry

Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Seeking an opportunity to work in a professionally managed organization

Control System Hardware Design for DeltaV/ DCS

Subsea Pipeline Engineer with experience in the field of engineering (FEED & Detailed Design), material, installation and cost estimation.

Construction, Commissioning and Operation & Maintenance procedures including emergency response procedures in line with best industry practices and based on approved applicable standards, Engineering for Procurement, vendor drawing review, site co-ordination and supervision, installation and commiss

Based on my experiences and knowledge in implementing the safety procedures and teaching the safety techniques in working safely, I'm very confident to be a part of your good office. I promise to help your company Incident Injury-Free

M.SC chemistry with painting inspection experience

I am a Qualified and experienced NDT INSPECTOR with ASNT LEVELII, and Diploma in mechanical enginner

Around 7.0 years of experience in design & construction of power plant structures, EHV indoor and outdoor sub-stations, industrial & residential structures.

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

I have a wide knowledge of on & offshore,gas, petrochemical and marine electrical systems.this knowledge and experience in conjunction with my professional qualifications combine to offer any potential employer the benefits of a well rounded and knowledgeable individual. Valid 4 Year Australian Visa

Reservoir engineer

Remote Sensing, GIS and Photogrammetry (M.Sc Remote Sensing)

I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My responsibility is Panel operaton.

Work as HSE supervisor

7 years working experience in Logistic, roven hands-on experience in many different logistic areas, from Project Planning, Development and Implementation, HSE regulations, Financial Administration, HR management, Purchasing and Supply chain, Warehouse processes and Transports, Camps and Offices set

Inspecton & certification of coating work

Coil Tubing/ Petroleum Engineer/Supervisor )

I have 15 years experience inpetrochemical plant.

organize fire department,good knowledge of fire fighting, organise periodic testing and maintenance of fire equipments.

A highly motivated, team spirited and performance driven engineering professional with an extraordinary blend of experience in Petroleum refining industry. Recognized for keen ability for improvement in reliability of a wide range of static equipment like crude oil heaters, high temperature hydrogen

I am at present looking for the Driller position. I have worked in the drilling industry for some 11 years

Electrical, planning and IT

PDS, PDMS, Smart Plant Review, navis work

Certified Internal Auditor, international auditor

Chief elecrician !!!

Material Management, Inventory control, Procurement, follow-up,Procurement Planning etc

A visionary executive with 16 years experience and proven history of outstanding performance in Industrial automation & Instrumentation in Project Design, Application and Development. Dynamic, skilled specialist with excellent record in Power, Refinery, Oil & Gas, Polyester, propylene, Pulp-Paper

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Medic wityh 14 years experience

Bachelors degree in Civil Engineering with more than 15 years experience in project engineering, construction and project controls with international exposure in oil and gas sector and other areas which encompasses the functions of planning, budgeting, scheduling, schedule controlling.

My skills:Experienced Project Document Control Supervisor working on large-scale on-shore/off-shore projects past 8years. Experienced in handling design/vendor packages, expediting of subcontractor’s package, Document Control, scheduling, progress reporting, good communication skills

Operations Manager, Barge Master, Barge Captain, Master Mariner, Rigging and Scaffolding Supervisor, Crane Operator.

Senior Contracts Manager - 25+ yrs experience in Power Plants, Airports, Water Treatment Plants, Major Civils and pipeline projects in Malaysia, Pakistan, Gibraltar, UK. Contract preparation and management ( EPC & Supplier )plus broad knowledge of planning, costs controls and project mamagement.

An adaptable Materials Controller with specialist strengths gained onshore, offshore and overseas. Supervisory and hands-on experience, with the ability to communicate at all levels in a fast moving environment. Experience in Drilling, Construction, Maintenance and Production.

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Application for Offshore Drilling Rig Mechanic

Experienced Cad Manager/Project Coordinator. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProcAdam. Engineering background - Structural/Civil.

Over twenty-seven years of domestic and international experience with a broad range of pipeline, oil and gas, and associated facilities projects.

Bachelors in Technology - Chemical Engineering – 14 years performing works on: Hysys, Pro-ii, Pipe Phase, Sinet, AutoCAD, AutoLISP, Micro-Station, 3Dstudio Max, Primavera, MS-Project and MS-Office products

chronological resume last updated April 12, 2004

Ops., Eng. and Field Service Manager: experienced in technical, project and operations management; strong and extensive record in managing engineering & operation personnel teams; implementing from start to finish of corporate technology programs provided to diverse clients around the world.

See resume body

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out