Resume - Mechanical engineer with 12 years of experience inside the petroleum industry; s...

Misco Jobs

Resume #2891

CONTACT INFORMATION:
View contact information...

Education

Bachelor of Science, Mechanical Engineering, May 1991
Universidad Nacional Experimental del Táchira (Venezuela). Overall GPA: 3.65/4.00
-------------------------------------------------------------------------------

Work Experience
Facilities Engineer, Western PDVSA.
06/91-12/93 Designed gathering system of the Boqueron Field.
Modified wellhead configuration of Boqueron wells to reduce sand effects.
Designed the Flow Station ORC-3 (25 MSTBD and 80 MMSCFD).

Reservoir Engineer, Western PDVSA. 01/94-12/97
Implementation of Water flooding Project in the Furrial Field (550000 BWPD injection). Implemented the water production project for Secondary recovery (artificial lift project to produce water for injection (ESP)).
Planned and executed drilling and workover program in Furrial field boosting production by 14% (45000 STB/D), by optimizing completion and perforation of 8 wells producers.

Production Optimization Engineer (Furrial Field). PDVSA. 01/98-06/01
Improved the gathering system of Furrial Field, (subcritical and critical flow)
Simulated all the Furrial wells (producers) in Nodal Analysis.
Simulated the Furrial Field gathering system (Full field), using Flosystem, ReO, and GAP software.

Production Optimization Team Leader (Furrial Field). PDVSA. 07/01-02/03
Responsible for the production of 350000 BOPD of the Furrial field.
Increased the capacity of the Furrial Field Gathering System by 1% (3500 BOPD).
Planned and executed drilling and workover program in Furrial field boosting production by 6% (20000 STB/D), by optimizing completion and perforation use.
Simulated all the Furrial field wells (gas and water injectors) in Nodal Analysis, improving the injection conditions of these wells.
Interpreted all the build-up test with Nodal Analysis and well test simulators.

Skills
Experienced optimizing the production potential of existing wells. Additionally, identifying and implementing production improvement opportunities that can be carried out by either rig or non-rig well interventions. Skilled in Production Operation, Waterflooding (Well conformance), and Gas Injection (EOR process at the Furrial field). Experienced in management of all wells through surveillance, performance analysis and optimization. Economical Evaluation. Skilled providing Production Technology input (including well designs) into reservoir development opportunities. I´ve been responsible for the implementation of appropriate technology, either from internal or external sources, in well design, while ensuring that the well value is maximized. Specialist in Nodal Analysis and subsurface-surface simulation. Experienced in Artificial lift (Electrosumersible Pumps). Skilled in Microsoft Word, Excel, PowerPoint and Access. Fluent in English

Activities
American Society of Mechanical Engineers-ASME
Society of Petroleum Engineers-SPE
Colegio de Ingenieros de Venezuela

Assignments
I was assigned during 6 months (January-1999 to June-1999), in BP-Alaska with the waterflooding team (exchange process between PDVSA and BP), working in the process of displacement efficiency (injectors and producers wells). Additionally, I was training to the Junior Production Engineer in nodal analysis, network simulation (gathering systems), and well conformance.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5251 to 5300 of 10816)

Go to Search Parameters...

Brief Description

Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Directional Driller 7 yrs Exp.

B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology

Material Engineer (Cathodic protection, corrosion, coating and painting)

Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.

Familiar work with computer office and internet

Electrical, Instrument, Electronics Engineering 20+ years

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.

My background is Drilling Engineer and I have a first experience as drilling supervisor, so I want to build my career in the world of drilling.

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Working as senior telecommunications technician for a big gas company.

Implementation Manager or Technical Project Manager

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Combined experience in design and construction

Graduated in computer science subject

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

Diploma in Electrical and Electronics Engineering ¡V 3 Years

I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.

Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.

Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design

First Prev 101 102 103 104 105 [ 106 ] 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out