Resume - A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engi...

Misco Jobs

Resume #29679

CONTACT INFORMATION:
View contact information...

EDUCATION:
1968 Degree – Marine Engineer, (Ship Engineer)
1967 Federal Diploma: Marine Engineer, (Ship Engineer) - Theoretical
1966 Training College for Marine Engineer, (Ship Engineer)
College Diploma

1962 Diploma of Electrical Instrument Maker

STRENGTHS:
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects, who is hard working, industrious and motivated by achievement and can be relied on to "get the job done".
- Extensive experience in project pre-commissioning, commissioning and start-up of major projects.
- Extensive experience HSE audits and inspections, Safety meetings with Subordinates and Contractors.
- Start-up co-ordination during plant modification, turnarounds and shutdowns
- Extensive experience as Shut-Down planner.
- Skilled production and process trouble shooter, capable of conceiving realistic and practical solutions maximising cost effectiveness
- Extensive management and supervisory skills experience with good man-management skills including employee training, safety training and management.
- Competent in document and procedure writing skills with extensive technical contact interviewing, section and recruitment skills.
Employment Summary:
- 35 years pre-commissioning, commissioning, start-up, operating in oil and gas petrochemical and metallurgical plants.
- 21 years project commissioning, start-up and operating in oil and gas and petrochemical plants.
- 14 years project commissioning, start-up and operating in metallurgical plants

EXPERIENCE SUMMARY:
- Gas treatment plants, Atmos crude oil distillation, vacuum distillation, platformers, naphtha & distillate hydrotreaters, tankfarm operation & blending, naphtha cracking, gasscubbers, degasifiers-CO2 removal plants, visbreakers, sulphur/amine plants, merox plants, naphtha rerun units, H P reaction vessels.
- Pressure testing, line blowing, line flushing, steamblowing, pitting testing, punchlisting of process lines.
- Steam generators, Water tube boilers, flame tube boilers, demin water plants.
- Waste heat boilers.
- Waste water treatment plants = Tanks, Horizontal/inclined screw conveyers (Classifiers), Sludge/mudpumps, cyclones, mixers dosing pumps.
- Boilerfeed water treatment plants.
- Closed Cooling system = Overhead air fin cooler with variable speed fans and fixed speed overhead air fin cooler with louvre airflow control.
- Steam turbines, gas turbines, gas compressors, air compressors, air dryers, positive displacement pumps, centrifugal pumps, submergible pumps, diesel pumps and generators, multistage pumps, screw conveyers, skimmers, airrators.
- Cryogenic storage, propethane reactors, catalyst preparations, catalyst blending
- Furnaces, incinerators, ground flares, including dry out and bake out.
- Flocculant blending, hydraulic systems, positive slurry displacement pumps.
- Utilities/offsite: Instrument air compressors and dryers, waste water treatment,
H2 – N2- O2 systems, Firewater systems, Potable water, Sandfilters, Safety shower systems, Steamline blowing (pitting test)

EMPLOYMENT HISTORY:
March 2005 - July 2005 TOTAL OIL Refinery
Antwerp BELGIUM
Commissioning-Co-Ordinator/Engineer Supervisor and Shut-Down planner.

April 1988 - July 2003 W A Refinery
Collie WA
Commissioning-Co-Ordinator/Operations Supervisor and Shut-Down planner.

May 1980 - March 1988 Total Oil Refinery
Sydney, Australia
Off-Side & Production Supervisor

May 1979 - May 1980 ICI Australia
Sydney, Australia
Commissioning Co-Ordinator/Control Room Operator

July 1973 - April 1979 Total Oil Refinery
Flushing, (Vlissingen) The Netherlands
Commissioning Engineer/ Production Supervisor

August 1969 - March 1973 Gulf Oil Refinery
Rotterdam, The Netherlands
Senior Process Technician

January 1967 - July 1969 V.N.G. Shipping Lines
Rotterdam, The Netherlands
Assistant Engineer and 5th Engineer

ADDITIONAL QUALIFICATIONS:

Issued By: Qualificate Achieved:
- St John Ambulance First Aid Certificate
- Rotterdam Fire Brigade Fire Fighting and B.A. Certificate
- Department of Labour and Industry - New South Wales Power Hoist Drive
- W A - Computer Centre Document Development
- W A- Computer Centre MS Windows NT
- W A- Computer Centre SAP Management including:
- Payroll Functions
- Risk Event Reporting
- Shut Down Planning
- Material Management
- Contract Management
- Business Event Menu Usage
- PM Material and Service
- Honeywell Honeywell TDC 2000,3000, 4500
- I.T.C. Work Place Assessor
- Management Technology Education - Perth Management Skills for Supervisors and Managers
- W A- HR Equal Opportunity, Bullying, Harassment and Discrimination in the Workplace
- Development-Dimension International Working Through Conflict
- Development-Dimension International Communicating with Others
- W A - Training Centre Atmosphere Testing – Gas Testing
- 3CM Pty Ltd People Development Workplace Trainer and Workplace Assessor

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 10902)

Go to Search Parameters...

Brief Description

Highly skilled and client motivated commissioning/operations technician able to work to Superintendent level and oversee many different nationalities of staff.

Drilling Supervisor for past 3 1/2 years with previous experience on Contractor side as a rig manager. I am motivated, knowledgeable and organized as a Drilling Supervisor. I have very good people skills and expect the best of people I work with.

Instrument & electrical design and field work

Sr. piping designer/checker, total 21 years experience in oil and gas field

Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word

Reservoir engineer - Experience in tight sands and shale and CBM

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

SENIOR DRILLING SUPERVISOR/OPERATIONS MANAGER/ DRILLING MANAGER

34 years in oil industry, toolpush and wellsite supervisor

I have more than 10 years of maintenance experience as an instrument technician

Adaptable, Senior Procurement specialist with international experience in Europe, Middle East and the FSU, with EPC’s, operators and service companies. A buyer, with experience of procurement procedures, expediting, inspections, shipping (incoterms) & customs. Knowledge of sulphuric acid plant procu

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Oil and gas economics manager

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Iam seeks job for Procurement / Material coorninator

Field Engineer

dcs panel operation for terminal and plant

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

Sale and marketing experiences.

Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Safety Engineer/Professional

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

I have a good management skills and experiences in various areas of operations. I am particularly aware of the Operation / construction / Commissioning and start up for Oil and Gas industries.

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Senior instrumentation and controls maintenance. Commissioning Supervisor specially

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out