Resume - I have been in the offshore industry for more than 23 years, my recent experienc...

Misco Jobs

Resume #3091

CONTACT INFORMATION:
View contact information...

Nationality: UK
Age: 53

October 2002 – Present Day
Position: Commissioning Manager
Working for Protomax as a consultant in the construction of three submersible swamp super drilling barges for PT ApexIndo Pratama Duta of Indonesia. In this position I have been responsible for firstly compiling and writing all the equipment and system commissioning procedures for the three vessels Maera, Raissa and Yani. Then organising and supervising the actual commissioning of the rig equipment and systems. Working closely with the classification society (BV) and the shipyard Keppel FELS of Singapore. The work is ongoing at this time and is expected to be complete in middle late May 2003.

1980- Sept 2002 Transocean Inc.
Position: Project Superintendent.
Working within the Technical Support Group based in Singapore.
Recent assignment:: Project Manager responsible for the upgrade of a company vessel from a 5k to a 7.5k high pressure mud system. The project involved upgrading mud pumps, renewal of the complete high pressure mud lines and standpipe manifolds, together with low pressure mud mixing systems, associated piping, centrifugals and mixers. Engineering, equipment selection, purchase, shipping to site and installation, together with prefabrication work was solely my responsibility and was carried out under my supervision.
The project undertaken in the field, was successful, completed within the time-frame of 14 days.
Other responsibilities included the re-commissioning of several drilling rigs for start-up on new contracts. This involved close liaison with the Singapore shipyards during special surveys and dry-docking procedures.

1980 – 2001 RBFalcon Exploration Co. Houston TX.
Positions: Piping & Mechanical Systems Team Leader; Chief Engineer, Maintenance Supervisor.
Assigned to the RBS8M and RBS8D Projects, as part of the engineering group responsible for developing and building a new generation of deepwater semi-submersible drilling rigs.
Initially, working in the Houston office during the design and conceptual engineering stages my responsibilities covered the design of the various systems for these rigs, the equipment layouts and drawing approvals. Helped draw up the specifications for the entire rig and also all its equipment, maintaining a close liaison with vendors and manufacturers. Attended many equipment factory acceptance tests on behalf of the company. These equipment manufacturers consisted of Wartsila engines, Boedewes winches, Liebherr cranes, National Oilwell, Varco, Hannon Hydraulics, Hydralift, Schottel and KaMeWa, Caterpillar, Hamworthy KSE, Alfa Laval, Halco, Halliburton, Outreach, Konsberg Simrad ships management and power management systems.

From Houston the project team transferred to the shipyard office in South Korea working closely with the Hyundai Heavy Industries engineering department and the HHI Production Management Team and also ABS classification society. During the building phase, my responsibility was to lead and co-ordinate a team of piping inspectors, mechanical inspectors and the HHI construction foremen, supervising construction and installation of rig equipment and systems within the shipyard. Later in the building phase my team expanded to include the Chief Engineer's, associated engineering staff, Maintenance Supervisors and mechanical staff assigned to operate the rig. Extensive commissioning of the equipment and systems followed involving working closely with the client commissioning team and shipyard team and classification society until hand over to our operations group and client.

This project culminated in two offshore drilling rigs capable of drilling in 8000-9000 ft of water with various concurrent-drilling operations being developed. The first rig, the Deepwater Nautilus is a conventionally moored vessel, and the second, the Deepwater Horizon a fully dynamically positioned vessel, the drilling equipment on both rigs being basically the same. The total investment by RBFalcon in this project was $600+ million.
Both the Deepwater Nautilus and Deepwater Horizon are now successfully working in Gulf of Mexico. With the Horizon being the most successful new rig in Transocean fleet for operational reliability.
A prior project was a smaller $27 million upgrade of a semi-submersible to increase its deep-water capability, this work was carried out in Singapore.

1979-1980 Zapata Marine Service
Positions: Chief Engineer, Shore Based Engineer.
Joined Zapata as a Chief Engineer and promoted to Shore Based Engineer in Abidjan, responsible for co-ordination of the maintenance and repairs to the 6 supply boats in that operation. Also worked alongside the various regulatory bodies organising and overseeing dry-docking and repairs to other company vessels from operations throughout that continent. Also worked in Canada responsible for the dry-docking and sale of two vessels to the Canadian Government.

1966-1979 Ellerman City Liners London U.K.
Positions: Engineer Cadet Officer – Chief Engineer.
Attended the Marine College (Academy) for a period of three years. The first two years were spent in theoretical studies, culminating in the OND in Engineering qualification. The third year was spent in gaining practical 'hands on ' experience in various engineering disciplines. Experience on the company's many and varied merchant vessels followed, completing a further 18 months of apprenticeship, and through merit promotions progressed to the position of 3rd Engineer Officer. In 1974 I attended college for a further year and obtained the 2nd Engineer Officer's license receiving an immediate promotion to that position. In 1978 I attended college again for another year and obtained my Chief Engineers License. Shortly after, received promotion to Chief Engineer. Responsibilities and experience with Ellerman involved running and maintaining large marine propulsion plant and all the ancillary equipment the largest being 60,000 s.h.p.

Qualifications

1968 OND ( Ordinary National Diploma ) in Engineering

1974 2nd Engineering Officer License ( British DOTI ) unlimited horse power Foreign Going

1978 Chief Engineers License ( British DOTI ) unlimited horse power Foreign Going

1997 City & Guilds qualification in Computers & Computing.

Education:

* 1997 University of Sunderland, Learning World, UK
* 1966-1969 South Shields Marine College Co. Durham, UK
* 1965-1966 South West Kent College Tunbridge Wells, Kent UK
* 1960-1965 Wilderness School for Boys, Seal, Kent,

Accreditations
* UK City & Guilds Computers and Computing
* 1978 Chief Engineer Officer's Ticket (Certification/Licence)
* 1974 Second Engineer Officer's Ticket (Certification/Licence)
* 1968 Ordinary National Diploma in Engineering (OND)
* 1966 8 GCE 'O' Level passes in Maths, English, Physics, Chemistry, Physics &Chemistry, Building & Engineering Science, Engineering Workshop Processes. Materials & Engineering Drawing
* 1965 5 GCSE passes in Maths, English, Physics, Music and Technical Drawing
* 1965 4 RSA (Royal Society of Arts) passes in English, Maths, Physics, Geography

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 10926)

Go to Search Parameters...

Brief Description

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries.

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

Application for the post of Electrical Supervisor

A highly experienced and reliable Operations Superintendent with 24 years offshore experience. An enthusiastic team member possessing a good sense of humour, capable of working on own initiative, with the ability and willingness to train and develop new team members.

25 years of experience in Production, Drilling, training and administration and costs control

To lead extra heavy oil production optimization; lifting, transporting, liquid-gas separation, pumping, dehydration, desalting and distillation. Coordinate, supervise and implement commissioning, maintenance and budget. To prepare economic evaluations. To implement and audit Iso-9002 systems.

Over 22 years experience in oil & gas production, plant management, maintenance supervision, environmental & safety, loss control. Extensive knowledge of oilfield technology. Available for immediate employment.

Objective: A self-starting, highly motivated team player looking to contribute to the goals and advancement of an organization through Health, Safety, and Environmental services.

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

Over 30 years of experience in refineries as craftsman, mid-level supervisor. Since taking early retirement from Chevron in California, I have taken positions mainly as client field construction QA representative on projects of millions of USD's. Also worked as DBA D.J.A. Consulting.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

Thirty years experience in the international field of Oil well Drilling

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

PROFESSIONAL OBJECTIVES Senior Drilling Engineer- Drilling Superintendent Houston / Overseas Assignments and Rotation Wide range of drilling experience in Well Planning / Engineering and Operations / Offshore and Onshore / Domestic and International.

Thirty years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Please see my attached Resume. As you will see I have a wide range of experience in Valves, Controls, Regulators, Rotating Equipment.

11 yrs+ managerial/sales Transferable skills Self-motivated, work under pressure Team player Leadership/interpersonal skills Mentor/train new staff Keen to train for position Optimal levels of strength & fitness Played football & hockey 15 yrs+ Dubai based Start work any time/place

Rig supervisor during 25 years with ESSO France. Applying for a senior or junior rig supervisor onshore.

My objective is to continue my career as an international, and domestic, offshore oil & gas production operator/supervisor/trainer.

Resume for the job in maintenance or operation field.

I have Eleven years experience in OIL/GAS/Petrochemical sector out that ten years with multinational companies in Gulf. Worked in Maintenance, Commissioning and Installation areas

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field.

Mathematics BS.C English Arabic bilingual Experience in large civil and oil-gas projects. Logistic, accounting, environmental and general supervision.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

Over 30 years of Construction and Project management work on large scale projects all over the world. Computer literate and fluent in Castilian Spanish and English

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

BACKGROUND SUMMARY · Twenty years experience in all aspects of organizing, managing and producing domestic and foreign conferences, trades shows and special events. · Fifteen years experience in the travel industry associated with the airline, corporate travel and agency environments

Eleven years of experience in design, development, testing and implementation of Application Software.

Functional summary Twelve years of experience in emergency medicine and international projects. Five years experience as a health and safety advisor on major oil and gas projects. Computer literate, excellent supervisory skills, creative thinker. Russian language ability.

22 years in oil field industry. Drilling and completion supervisor

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

My previous experience has been working offshore for Dubai Natural Gas Company for over 20 years. During this time I was promoted to Platform Chief after working as a Process Technician and Shift Supervisor.

My strength is in rig management and in particular jack-up rigs in the international market. In excess of twenty years diversified experience in execution and management of drilling and workover operations worldwide onshore and offshore operations.

MBA with comprehensive experience in oil and gas industry; strong skills in project management and business development; good communicator and outstanding interpersonal and leadership skills; Canadian citizenship

I am a Commissioning \ Construction \ Hook Up Manager with 27 years experience in the Oil, Gas and Power Industries.

I'm a USN Veteran Electrician with a solid background of electronics. I'm a self starter, and I have been working for myself on/off during the last year as a contract labor electrician. At this time I'm working for myself doing electrical jobs for Coastal Drilling in Corpus Christi, Texas.

OIL AND GAS SUPER/CONST 30 EXP US AND INTERNATIONAL

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out