Resume - A high motivated, quick-learner, and adaptable person with good technical skills...

Misco Jobs

Resume #31175

CONTACT INFORMATION:
View contact information...

GENERAL SUMMARY
A high motivated, quick-learner, and adaptable person with good technical skills and good communication skills in English. Proof to work underpressure with multidisciplinary teams and multi cultural. A 3 years of experience in development geology at oil and gas industry. Have experienced in reservoir characterization in siliciclastic rocks of deltaic environments. Extensive knowledge data acquisition, well correlation using sequence stratigraphic framework, subsurface mapping, reservoir modeling and volumetric calculations. Also have a broad knowledge in well operations especially in the overpressure zone. Familiar using Workstation (Unix Operating System, Schlumberger's Geoframe, Paradigm's Geolog6, Petrel) to support analysis and interpretation in geosciences. Possess some course certificates related with geological job, and have experience in coaching less experienced geologist.

OBJECTIVES
A career position in international oil and gas industry where I can grow & increase my ability.

EDUCATION
B.S, Petroleum Geology, Geological Engineering, Gadjah Mada University, Indonesia. Graduated with Honor (GPA = 2.94/4.0)

WORKING EXPERIENCE
Total E&P Indonesie (April 2002 - Recently)
Development Geologist, Balikpapan Indonesia

- Development & Operation Geologist of Tunu Gas Field located at the Lower Delta Plain - Delta Front facies, in offshore Mahakam Delta, Kutei Basin, East Kalimantan.

The work included:
1. Generated 2D Geological Models using CPS-3 software with deterministic method of Stratigraphic Unit 1-6 (75 layers). Defined facies with radial trend of bars and incorporated channel distribution. The results were performed in net sand map and porosity map. Define each layer into several Geological Pressure Unit (GPU) using pressure plot; resulting net pay map and water saturation map. Also performed volumetric calculations capturing uncertainty ranges. The results were used as a reference to build framework in 3D geological modeling.

2. Generated 3D Geological Models with deterministic method of Stratigraphic Unit 1-6 with 75 layer (software used: Petrel). Completed facies modeling of channel and bar, as well as property modeling of porosity and water saturation.

3. Proposed and prepared both grid and infill wells, sidetrack wells, and deepening wells; including provide pre-drill pore pressure prediction. Monitored wells being drilled by supervising wellsite geologist and mudlogger, including well correlation using LWD and mudlogging data. Also controlling wireline and picking MDT points and/or Fluid Analysis. Decision maker while drilling process and to be aware with overpressure zone. Lead the fluid status meeting for wells had been drilled with Petrophysicist and Reservoir Engineers; resulting good marker and correct fluid status in each wells.

4. Generated and analyzed pressure maps and correlate between overpressure zones versus stratigraphic marker in order to deal with high pressure and high temperature reservoirs. Analysis which performed as pressure maps have identified overpressure above particular values. Cross plot between pressure data and shelf break that indicate a high pressure zone.

5. Wrote-up post-drilled annual well report and analyzed all well; incorporating operation lesson learned (problems, operation history, etc.) as well as comparison between prognosis and actual results.

6. Data management incorporating various geological and operation data, including query, QC and uploading to workstation applicatrions (CPS-3 and Geolog 6).

* Junior Geologist of Handil Oil & Gas Field located at the Upper Delta Plain environment, offshore Mahakam Delta, Kutei Basin, East Kalimantan.
1. Generate 2D Geological Model using CPS-3 software focusing in internal architecture and hydrocarbon trapping at Shallow Zone (R0-08 - R0-9); resulted net sand maps and detailed facies evolution maps.

2. Stratigraphic study in Shallow Zone including facies analysis, well interpretation and correlation. It was also defined 4th order markers using sequence stratigraphic frameworks, differentiated bar to channel facies and interpreted zone of interest based on log data.

COURSE & TRAINING
- October 2004
Petrel Introduction Course at Balikpapan
- July 2004
Basic Wireline Logging Course at Balikpapan
- May 2002
Wellsite Training by wellsite geologist at Total E& P Indonesie at Tambora
- April 1997 - April 1998
English Training at LIA English Course at Yogyakarta

PROFESSIONAL MEMBERSHIP
- Indonesian Geological Association (IAGI)
- Indonesian Petroleum Association (IPA)

SKILL SUMMARY
- Static 3D geological modeling with deterministic methods
- 2D subsurface mapping with deterministic methods
- Well correlations and interpretations
- Operation geologist job (especially in high pressure area)

APPLICATION SUMMARY
- 3D Modeling Software (Petrel)
- Mapping Application (CPS-3)
- Well Correlation Software (Geolog-6)
- UNIX Operating System
- Microsoft Office Application
- Database application (Finder)

LANGUAGE
- English
- Indonesia

HOBBIES
- Automotive (Off Road & Rally)
- Sports
- Travelling

REFERENCE
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 10816)

Go to Search Parameters...

Brief Description

LOOKING FOR JOB IN ANY POSITION

B.E.(Electronics & Telecommunication) with good academic records. working as service engineer in R.K. engineering services private limited.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

Procurement & Supply Chain Management

Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Had been involved in diversified organization for more than 7 years as Document Control, Management Information and Records Custodian. Knowledgeable in administering exchange of documents used of Document Control System, proper retrieval of documents in line with the ISO Standard and Procedures.

Seeking Chemist, Laboratory, or Quality Control Position

Worked in an oil and gas industry and undergone an intensive training .

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.

Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available

Project Management, Primavera P3E Scheduler

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

1Diploma in petrochemical engineering ,Kerala

Instrument Engineering, Fire & Gas Engineering

Manager / Engineer ( HW/SW/QA/Training )

Bachelor of Engineering (Mechanical) from Adiparasakthi Engineering college, Melmaruvathur, Madras university. (April 2002)

Over +3 years of Operation experience in OIL & GAS industry with includes Pre-commissioning, commissioning operation.

A high motivated, quick-learner, and adaptable person with good technical skills and good communication skills in English. Proof to work underpressure with multidisciplinary teams and multi cultural. A 3 years of experience in development geology at oil and gas industry.

Material controller / store incharge / ware house incharge

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

Looking for suitable operation. vacancy

Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma

Marine + International Projects Oil & Gas

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

The professional profile of a physicist is one of the most varied and extensive. Physicists learn during their studies, strategies for solving problems and issues as quickly and efficiently. Following this training the physicists can work in a universal (almost) any professional area.

Project Engineer/ Program Manager/ Controls Engineer

MS office, operating system: Windows XP,2000,98, some college

Process Design and Simulation Engineer

Processing and Borehole Geology Interpretation (OBDT, HALS, FMI, UBI and OBMI). Preparation of Interactive CD-ROM of final reports for customer. Graphic Design. Graphic Visualization

I'm a young Petroleum Engineer with capacity of leadership, creativity, good interpersonal relationships, constant bring up to date and easiness for the learning of specialized software, also ending up contributing new ideas mainly for the oil industry in the development of projects.

Experience Summary 4 Years Experience in various projects involving Fiber optic networks for APSWAN (Andhra Pradesh State Wide Area Network), JTM (Jasmine Telia Mobiles), TATA Teleservises HTIL(Hughes Telecom) Project and Reliance Infocom Project.

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation

I worked as a supervisor and foreman on suspension bridge projects in asia and europe and posses,rigging,banking,slinging skills. I also have experience as a ultrasonic operator and posses a ASNT level 2 US cert. I have current OLF,BOSIET,HUET and medical certs and am available to work immediately

I am a self-motivated individual that has a desire to play a Key role in the acquisition of Oil, Gas and Minerals. What I do lack in experience I will make up with enthusiasm and willingness to learn. I will strive to get the job done right the first time on time.

Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.

Piping/Mechanical Draughtsman (sewerage plant/Oil & gas)

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Project Engineer

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out